Schneider VW3A1104R50 Remote Cable for Graphic Display Terminal

Where It Excels in Industrial Use

• Remote Operator Interface Installation
The Schneider VW3A1104R50 is a 5-meter remote cable designed to connect Schneider Electric graphic display terminals to compatible Altivar variable speed drives and Lexium motion controllers. Its extended cable length allows operator interfaces to be mounted away from the drive for improved accessibility.

• Control Cabinet Door Mounting
Ideal for machine builders and panel manufacturers who install the graphic display terminal on the enclosure door while keeping the drive safely inside the electrical cabinet, enhancing operator convenience and safety.

• Commissioning and Maintenance
Enables technicians to configure parameters, monitor operating status, and perform diagnostics from the cabinet exterior, reducing maintenance time and minimizing cabinet exposure during servicing.

• Industrial Drive and Motion Systems
Suitable for Altivar drives, Altistart soft starters, and Lexium motion products that support remote graphic display terminals, making it an ideal accessory for industrial automation and OEM machinery. 

Key Strengths at a Glance

• Extended 5-Meter Cable Length
Provides greater installation flexibility than shorter cable options, allowing convenient placement of the graphic display terminal in large control panels.

• Dual RJ45 Male Connectors
Features two factory-installed RJ45 male connectors for fast, secure, and plug-and-play installation.

• Wide Product Compatibility
Compatible with VW3A1101 and VW3M1701 graphic display terminals and numerous Altivar, Altistart, and Lexium product families.

• Industrial-Grade Construction
Designed for dependable communication in demanding industrial environments while maintaining stable connectivity between the drive and the remote display terminal. 

Technical FAQs

1. What is the Schneider VW3A1104R50?

The VW3A1104R50 is a 5-meter remote cable used to connect compatible Schneider Electric graphic display terminals to Altivar drives and Lexium motion products.

2. What is the cable length?

The cable length is 5 meters (16.4 ft).

3. What connectors are used?

The cable is equipped with two RJ45 male connectors.

4. Which display terminals are compatible?

It is compatible with VW3A1101 Graphic Display Terminal and VW3M1701 Remote Graphic Display Terminal.

5. Which Schneider product families support this cable?

Supported product families include Altivar 12, Altivar 32, Altivar 61, Altivar 71, Altivar Machine ATV320, Altivar Machine ATV340, Altivar Process ATV600, Altivar Process ATV900, Altivar Easy 610, Altistart 22, and Lexium 32.

6. Does the cable supply power to the drive?

No. It is designed solely for communication between the graphic display terminal and the compatible drive or controller.

7. Is installation plug-and-play?

Yes. The cable installs directly using RJ45 connectors without requiring additional configuration.

8. Can it be used with cabinet door mounting kits?

Yes. It is commonly used with Schneider Electric remote mounting kits to install the graphic display terminal on enclosure doors.

9. What is the product weight?

The cable weighs approximately 0.25 kg.

10. What are the typical applications?

Typical applications include industrial variable speed drives, motion control systems, conveyor equipment, packaging machinery, process automation, and OEM control panels requiring remote operator access.