Ingersoll Rand 47704433001 24242398 Air/Oil Separator Module

Where It Excels in Industrial Use

• Compressed Air Separation — Ingersoll Rand 47704433001 is a compressor maintenance reference, while 24242398 is associated with air/oil separation applications for compatible oil-injected compressor systems. The separator helps remove oil mist from compressed air and supports lubricant recovery.

• Compressed Air Quality Management — 24242398 helps control oil carryover into the compressed-air outlet, supporting cleaner downstream air and protecting connected equipment.

• Lubricant Recovery — Efficient air/oil separation helps return recovered lubricant to the compressor oil circuit, supporting efficient oil utilization and stable compressor operation.

• Preventive Maintenance Support — Scheduled separator inspection and replacement help maintain separation efficiency, reduce oil carryover, and support dependable compressor performance.

Key Strengths at a Glance

• Air/Oil Separation Performance — 24242398 is associated with compatible compressor air/oil separation applications.

• Oil Carryover Control — Proper separator performance helps minimize lubricant entering the compressed-air stream.

• Compressor Protection — Effective separation supports lubrication management and reliable compressor operation.

• Maintenance Accuracy — Verifying the reference against the compressor configuration helps reduce incorrect-part installation risks.

Technical FAQs

1. What is Ingersoll Rand 47704433001?

47704433001 is an Ingersoll Rand compressor maintenance reference associated with compatible service applications.

2. What is Ingersoll Rand 24242398?

24242398 is an Ingersoll Rand component reference associated with air/oil separator applications.

3. What is the primary function of 24242398?

Its primary function is to separate oil from compressed air in compatible oil-injected compressor systems and support lubricant recovery.

4. Why is air/oil separation important?

It helps maintain compressed-air quality while allowing recovered lubricant to return to the compressor lubrication system.

5. What can happen if separator performance deteriorates?

Oil carryover may increase, lubricant consumption can rise, and compressor operating performance may be affected.

6. What factors influence separator service life?

Operating hours, compressor load, lubricant condition, contamination, temperature, and maintenance practices can affect service life.

7. Can 24242398 be substituted with another separator?

Only after confirming the compressor model, separator specifications, dimensions, pressure requirements, and manufacturer compatibility.

8. What should be inspected during separator replacement?

Inspect the separator housing, sealing surfaces, oil-return path, and related compressor components before installation.

9. Why should the compressor model and serial number be checked?

Different compressor configurations may require different separator assemblies. Verification helps prevent incorrect-part installation.

10. Who should install the separator?

Replacement should be performed by qualified compressor service personnel following the applicable maintenance procedure.