Introduction
The Ingersoll Rand 47704460001 / 24266223 Hydraulic Hose Assembly is a compressor service component intended for reliable pressurized-fluid routing in compatible Ingersoll Rand equipment.
The directly documented 24266223 reference is described as “HOSE, HYD 1.00 X 44 ORFS STR X ORFS 90 ELB”, defining a 1-inch hydraulic hose with a 44-inch length and an ORFS straight-to-90-degree-elbow configuration.
This connection geometry is important in industrial compressor applications. A hose must not only provide the required pressure and fluid compatibility, but also maintain the correct orientation and routing within the machine. The integrated 90-degree fitting helps establish the intended installation path and can minimize unnecessary stress on the flexible section.
Regular inspection is recommended for any high-use hydraulic or fluid hose. Abrasion, heat exposure, vibration, fitting damage, and aging can gradually reduce hose reliability. Replacing a complete OEM-referenced assembly helps maintain the intended connection configuration and sealing arrangement.
The two supplied references are treated as one product listing as requested. Because the relationship between 47704460001 and 24266223 is not independently established in the available public documentation, the final replacement should be confirmed against the compressor model, serial number, and applicable OEM parts list.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Ingersoll Rand |
| Primary Part Number | 47704460001 |
| Associated Reference | 24266223 |
| Product Type | Hydraulic Hose Assembly |
| Hose Description | HYD 1.00 × 44 ORFS STR × ORFS 90 ELB |
| Nominal Hose Size | 1.00 in |
| Hose Length | 44 in |
| Approx. Hose Length | 1,117.6 mm |
| Connection 1 | ORFS Straight |
| Connection 2 | ORFS 90° Elbow |
| Sealing System | ORFS / O-Ring Face Seal |
| Service Function | Pressurized Fluid Routing |
| Equipment Type | Ingersoll Rand Compressor Equipment |
| Complete Assembly Dimensions | 44-in hose-length specification; overall fitting envelope is configuration-specific |
| Weight | Approximately 1.38 kg according to one OEM-listed distributor record; verify actual shipment weight before logistics planning. |
| Material | Hose construction and fitting materials are configuration-specific |
| Compatibility | Model-, serial-number and circuit-dependent |
The 44-inch figure describes the documented hose length rather than a guaranteed overall end-to-end envelope including the fittings. Exact installed dimensions should therefore be checked against the original assembly before ordering. The available weight data are distributor-specific and should be treated as reference information rather than a guaranteed net weight.
Recommended Companion Models
| Model | Product Name |
|---|---|
| 24266207 | Ingersoll Rand Hydraulic Hose, 1.00 × 32 ORFS Straight × ORFS 90° Elbow |
| 24266215 | Ingersoll Rand Hydraulic Hose, 1.00 × 28 ORFS Straight × ORFS 90° Elbow |
| 24266231 | Ingersoll Rand Hydraulic Hose, 1.00 × 42 ORFS Straight × ORFS 90° Elbow |
| 24266249 | Ingersoll Rand Hydraulic Hose, 1.00 × 19 ORFS Straight × ORFS 90° Elbow |
These references belong to the same Ingersoll Rand hydraulic-hose family, with different lengths and application configurations.
Frequently Selected Alternatives
| Model | Product Name |
|---|---|
| 24267015 | Ingersoll Rand Hydraulic Hose, 1.25 × 43 ORFS Straight × ORFS Straight |
| 24265621 | Ingersoll Rand Hydraulic Hose, -20 / 22 in ORFS Straight × ORFS Straight |
| 24265639 | Ingersoll Rand Hydraulic Hose, -20 / 32 in ORFS Straight × ORFS Straight |
| 24265589 | Ingersoll Rand Hydraulic Hose, 1.25 × 38 in ORFS Straight × ORFS Straight |
These are related Ingersoll Rand hydraulic-hose references with different diameters, lengths, or fitting configurations. They should not be treated as direct substitutes without checking the compressor's parts list, pressure requirements, connection geometry, and installation position.
