Name: Ingersoll Rand 47704460001 / 47622840001 Bearing Oil Injection Hose
Brand: Ingersoll Rand
SKU: 18211
Availability: InStock
Rating: 5.0 (1 reviews)

Introduction

The Ingersoll Rand 47704460001 / 47622840001 Bearing Oil Injection Hose is a specialized compressor lubrication component designed for controlled oil delivery to bearing-related circuits.

The directly documented 47622840001 reference is described as “HOSE, BEARING OIL INJECTION, PTFE 5/8ID DASH 12 X DASH 10.” This specification distinguishes the part from ordinary air or hydraulic hoses and highlights the importance of matching the original hose construction and connection arrangement.

Bearing oil injection systems depend on consistent fluid delivery. A deteriorated hose can introduce leakage, contamination, restricted flow, or connection failure, potentially affecting lubrication performance. Using the correct application-specific hose helps maintain the designed oil path.

PTFE construction is particularly relevant in this type of service because the hose material is intended for demanding fluid environments. However, PTFE construction alone does not make a hose interchangeable; the complete assembly must still match the original fittings, size, routing, and operating conditions.

Related Ingersoll Rand parts listings also show other dedicated bearing-oil components, including tubes connecting manifolds to bearing-oil injection points and rear-bearing oil-feed tube assemblies. This reinforces that bearing-oil hoses and tubes are application-specific service components.

The two supplied references are treated as one product listing as requested. The available documentation directly verifies 47622840001, but does not independently establish the relationship between 47704460001 and 47622840001. Final compatibility should therefore be confirmed against the compressor model, serial number, and applicable OEM parts documentation.

Technical Specifications

Specification	Details
Brand	Ingersoll Rand
Primary Part Number	47704460001
Associated Reference	47622840001
Product Type	Bearing Oil Injection Hose
Hose Construction	PTFE
Nominal Inner Diameter	5/8 in
Connection Designation	Dash-12 × Dash-10
Service Function	Bearing Oil Injection / Lubrication
Application	Ingersoll Rand Compressor Equipment
Fluid Service	Bearing Lubrication Oil
Complete Hose Dimensions	Configuration-specific; exact overall length not reliably verified
Product Weight	5.05 listed by one distributor, but the unit is not clearly stated; verify actual net weight before shipping.
Fitting Configuration	Dash-12 × Dash-10
Material	PTFE hose construction
Compatibility	Model-, serial-number and lubrication-circuit dependent

The available documentation verifies the 5/8-inch ID, PTFE construction, and Dash-12 × Dash-10 connection designation, but does not provide a sufficiently reliable overall hose length. Therefore, the complete assembly dimensions should be confirmed from the applicable OEM parts drawing before ordering.

Recommended Companion Models

Model	Product Name
47524521001	Bearing Oil Injection PTFE Hose, 5/8 ID Dash-12 × Dash-10
47581507001	Bearing Oil Injection PTFE Hose, 5/8 ID Dash-12 × Dash-10
47651284001	Tube, Manifold to Bearing Oil Injection, IR254/182 Male Studs
47569021001	Tube, Manifold to Bearing Oil Injection, IR230

The first two references are documented with the same bearing-oil injection hose specification, while 47651284001 and 47569021001 are dedicated bearing-oil injection tubes for specific compressor configurations.

Frequently Selected Alternatives

Model	Product Name
85581858	Tube, Oil Feed — Rear Bearing
85581866	Ingersoll Rand Airend Tube Assembly
85581882	Ingersoll Rand Airend Tube Assembly
24260804013	Hydraulic Hose, 0.25 × 34 in, ORFS Straight × ORFS 90° Elbow, PTFE

These are related fluid-routing components used in Ingersoll Rand compressor systems, but they are not guaranteed direct replacements for 47622840001. In particular, 85581858 is documented as a rear-bearing oil-feed tube, while 85581866 and 85581882 appear as airend tube assemblies in Ingersoll Rand parts documentation. The 24260804013 reference is a separate PTFE hydraulic-hose configuration and should only be considered where the equipment documentation specifies that exact assembly.

Where It Excels in Industrial Use

Bearing Oil Injection Service: The supplied 47704460001 / 47622840001 references are treated as one product listing. Part 47622840001 is documented as an Ingersoll Rand bearing oil injection hose, using PTFE construction with a 5/8-inch ID and Dash-12 × Dash-10 connection configuration.
Compressor Bearing Lubrication: The hose is intended to route oil to bearing-related circuits, where reliable delivery is essential for maintaining proper bearing lubrication and compressor operating stability.
High-Temperature Fluid Routing: The PTFE hose construction is suited to demanding oil-service environments where resistance to temperature and fluid exposure is important.
Planned Maintenance and Repair: It is appropriate for replacing an aged, damaged, leaking, or contaminated bearing-oil injection hose while retaining the original connection specification.

Key Strengths at a Glance

OEM Ingersoll Rand Reference: 47622840001 is listed as a genuine/OEM Ingersoll Rand replacement component.
Dedicated Bearing-Oil Application: Unlike a general-purpose hydraulic hose, the component is specifically identified as “Hose, Bearing Oil Injection.”
PTFE Hose Construction: The documented specification identifies PTFE as the hose material, supporting demanding oil-injection service.
Defined Connection Size: The 5/8-inch ID with Dash-12 × Dash-10 configuration provides a specific connection architecture that should be matched during replacement rather than substituted by nominal hose diameter alone.

Technical FAQs

1. What is Ingersoll Rand 47704460001 / 47622840001?

The supplied references are treated as one product listing. 47622840001 is documented as an Ingersoll Rand PTFE bearing oil injection hose with a 5/8-inch ID and Dash-12 × Dash-10 configuration.

2. What is the primary function of 47622840001?

Its primary function is to route bearing-injection oil through the applicable compressor lubrication circuit.

3. What type of hose construction is specified?

The documented product description identifies the hose as PTFE.

4. What does 5/8 ID indicate?

It identifies a nominal 5/8-inch internal diameter for the hose passage.

5. What do Dash-12 and Dash-10 identify?

They identify the respective hose/fitting size designations used in the assembly. They should be matched to the original connection configuration rather than interpreted as a simple hose-length specification.

6. Is this a general-purpose hydraulic hose?

No. It is specifically identified as a bearing oil injection hose, so its application should be verified against the compressor's lubrication and bearing-oil circuit.

7. Why is PTFE important in this application?

PTFE provides useful resistance to many fluids and elevated temperatures, making it suitable for demanding oil-service environments when the complete assembly is correctly specified.

8. Can a standard rubber hose replace this component?

Not automatically. Hose material, internal diameter, connection sizes, pressure and temperature capability, fluid compatibility, and installation geometry must all meet the original application requirements.

9. What should be inspected when replacing the hose?

Inspect the mating fittings, sealing surfaces, connection threads, hose ends, clamps or supports, and nearby oil-injection components for contamination, wear, or damage.

10. What should be verified after installation?

Verify correct routing and connection orientation, ensure the hose is free from twisting or excessive bending, and confirm that the bearing-oil circuit remains leak-free during operation.

Look forward to your comments!Comment