Ingersoll Rand 47604755001 24900458 Maintenance Service Configuration

Where It Excels in Industrial Use

• The Ingersoll Rand 47604755001 24900458 configuration is suited to scheduled high-dust maintenance on applicable RS185-260I/IE compressor installations.

• It combines the high-dust annual maintenance service reference with the 24900458 coolant filter reference, addressing both scheduled service requirements and coolant-system filtration.

• This configuration is particularly useful in manufacturing plants, fabrication areas, workshops, and other industrial environments where airborne contamination can increase maintenance demands.

• The coolant filter supports removal of contaminants from the compressor coolant circuit, helping protect coolant cleanliness and system components during normal operation.

• It provides maintenance teams with a consolidated model reference for planned service procurement and workshop preparation.

Key Strengths at a Glance

• High-dust maintenance orientation for demanding industrial operating environments.

• Incorporates the 24900458 coolant filter reference within the complete configuration.

• Supports the 1-year / 6,000- or 8,000-hour high-dust maintenance schedule represented by 47604755001.

• Helps maintain filtration performance in both the compressor intake and coolant system service program.

• Suitable for structured preventive-maintenance planning and scheduled component replacement.

• Provides a concise configuration reference for applicable RS-series service activities.

Technical FAQs

1. What compressor family is the 47604755001 24900458 configuration intended for?

The complete configuration is intended for applicable Ingersoll Rand RS185-260I/IE compressor installations covered by the high-dust maintenance program.

2. What does 47604755001 identify?

The 47604755001 reference identifies the RS185-260I/IE high-dust air and pre-filter maintenance service kit for the 1-year / 6,000- or 8,000-hour service interval.

3. What function does 24900458 provide in the complete configuration?

The 24900458 reference identifies a coolant filter element used to help remove contaminants from the compressor coolant circuit.

4. Why is coolant filtration important in a rotary screw compressor?

Effective coolant filtration helps control particulate contamination within the coolant circuit, supporting reliable circulation and protection of components that depend on clean coolant.

5. Is this configuration suitable for dusty industrial environments?

Yes, the complete configuration is intended for high-dust maintenance applications, although final suitability should be confirmed using the compressor model, serial number, and operating conditions.

6. What should be inspected before replacing the 24900458 filter?

The technician should inspect the filter mounting area, sealing surfaces, connections, surrounding piping, and coolant-system condition before installing the replacement filter.

7. What are the approximate dimensions of the 24900458 filter?

The 24900458 coolant filter is commonly referenced at approximately 118 mm outside diameter and 364 mm height, with a 1 3/4-12 connection specification.

8. Can the coolant filter be serviced independently of the air filtration system?

The coolant filter is a distinct service element within the complete model configuration, but its replacement should be performed according to the compressor's prescribed maintenance procedure and service interval.

9. What system conditions should be checked after coolant-filter installation?

The technician should verify correct seating and connection, inspect for coolant leakage, confirm proper flow conditions, and monitor the compressor during initial operation.

10. How should compatibility of the complete model reference be confirmed?

Compatibility should be checked against the compressor's exact model and serial information, applicable maintenance schedule, filter housing arrangement, and current parts documentation before installation.