Ingersoll Rand 47689371005 / 95021804 Airend O-Ring Module

Where It Fits in Industrial Applications

• Used in planned maintenance and replacement work involving compatible Ingersoll Rand compressor airend systems.

• 47689371005 is identified as an airend replacement kit for the CDM80 OJ configuration.

• 95021804 is used as an O-ring sealing component in applicable Ingersoll Rand compressor equipment.

• Suitable for overhaul work where an airend replacement is accompanied by renewal of an associated sealing ring.

• Appropriate for maintenance applications requiring accurate matching of the O-ring size to the original groove and machine configuration.

Key Strengths at a Glance

• CDM80 OJ airend configuration — 47689371005 is identified as the CDM80 OJ airend replacement kit.

• Defined sealing size — 95021804 is specified with a 1.062-inch inside diameter and 0.094-inch cross-section.

• Genuine OEM component — 95021804 is identified as a genuine Ingersoll Rand O-ring.

• Service-oriented combination — Supports major airend replacement work together with renewal of an applicable sealing component.

• Accurate fitment focus — O-ring dimensions and the compressor parts breakdown should be checked before installation.

Technical FAQs

1. What is the Ingersoll Rand 47689371005 / 95021804 configuration?

It is a user-supplied configuration combining the 47689371005 CDM80 OJ airend replacement kit with 95021804, an Ingersoll Rand O-ring.

2. What does 47689371005 represent?

47689371005 is identified as a CDM80 OJ airend replacement kit for compatible Ingersoll Rand oil-free compressor equipment.

3. What is 95021804?

95021804 is a genuine Ingersoll Rand O-ring identified as 1.062 inches inside diameter with a 0.094-inch cross-section.

4. What is the function of the 95021804 O-ring?

The O-ring provides sealing at the designated joint or interface in the applicable compressor assembly.

5. Is 95021804 specifically supplied inside the 47689371005 kit?

The available product references identify 47689371005 as the CDM80 OJ airend replacement kit and 95021804 as a separate O-ring. The available information does not establish that 95021804 is a standard included component of the 47689371005 kit.

6. Can the 95021804 O-ring be reused after disassembly?

An O-ring should generally be replaced when its sealing joint is opened, particularly during major airend service, because compression set or surface damage can compromise sealing.

7. What are the published dimensions of 95021804?

The listed size is approximately 1.062 inches inside diameter with a 0.094-inch cross-section.

8. What should be checked before installing 95021804?

The O-ring size, groove dimensions, mating surfaces, sealing location, and applicable material specification should be checked against the compressor service documentation.

9. Is this configuration suitable for every CDM80 compressor?

Not necessarily. Airend and sealing configurations can vary by machine build and production revision, so the compressor model and serial number should be verified before ordering.

10. Are fixed dimensions and weight available for the complete configuration?

Not reliably published as fixed values for the complete 47689371005 / 95021804 configuration.