Ingersoll Rand 47689371005 / 95022075 Airend O-Ring Module

Where It Fits in Industrial Applications

• Used in planned maintenance and airend replacement work involving compatible Ingersoll Rand oil-free compressor systems.

• 47689371005 is associated with the CDM80 OJ airend replacement configuration.

• 95022075 is identified as a CD26M O-ring for applicable Ingersoll Rand compressor equipment.

• Suitable for major service work where an airend replacement is accompanied by renewal of an associated sealing component.

• Appropriate for maintenance applications where the airend and sealing component must be matched to the actual machine configuration.

Key Strengths at a Glance

• CDM80 OJ replacement reference — 47689371005 is associated with the CDM80 OJ airend replacement kit.

• CD26M sealing component — 95022075 is identified as an O-ring for the CD26M compressor family.

• Defined metric dimensions — 95022075 is listed at 69.52 mm inside diameter with a 2.62 mm cross-section.

• OEM maintenance application — The configuration uses genuine Ingersoll Rand part references for compressor service work.

• Fitment-focused design — Model and serial-number verification helps prevent mismatching airend and sealing components.

Technical FAQs

1. What is the Ingersoll Rand 47689371005 / 95022075 configuration?

It is a user-supplied configuration combining the 47689371005 CDM80 OJ airend replacement kit with 95022075, an O-ring identified for CD26M compressor equipment.

2. What does 47689371005 represent?

47689371005 is identified as an airend replacement kit for the Ingersoll Rand CDM80 OJ configuration.

3. What is 95022075?

95022075 is an Ingersoll Rand O-ring identified for the CD26M compressor family.

4. What are the published dimensions of 95022075?

The listed dimensions are approximately 69.52 mm inside diameter and 2.62 mm cross-section, giving an approximate outside diameter of 74.76 mm.

5. Is 95022075 specifically part of the 47689371005 CDM80 OJ kit?

The available references identify 95022075 separately as a CD26M O-ring and do not establish it as a standard included component of the 47689371005 CDM80 OJ replacement kit.

6. Can 95022075 be reused after compressor disassembly?

An O-ring should generally be replaced after a sealing joint is opened, especially during major airend service, because compression set or surface damage can reduce sealing reliability.

7. What should be checked before installing 95022075?

The O-ring dimensions, groove condition, mating surfaces, sealing location, and applicable compressor service instructions should be checked before installation.

8. Is this configuration suitable for every CDM80 compressor?

Not necessarily. Airend and sealing configurations can vary by compressor build and production revision, so the exact model and serial number should be confirmed.

9. Why is the CDM26 reference important for 95022075?

The available parts references identify 95022075 as a CDM26 O-ring, which means it should not automatically be treated as a CDM80 OJ-specific sealing component without additional configuration verification.

10. Are the complete configuration dimensions and weight published?

A reliable fixed overall dimension and weight for the complete 47689371005 / 95022075 configuration are not published.