Ingersoll Rand 47689337001 / 95021804 Oil Pump O-Ring Module

Where It Fits in Industrial Applications

• Designed for oil pump service and sealing maintenance on compatible Ingersoll Rand compressor configurations.

• 47689337001 is identified as an Ingersoll Rand oil pump service package associated with applicable R25/20 and CD26 compressor applications.

• 95021804 is identified as an Ingersoll Rand O-ring with a nominal 1.062-inch inside diameter and 0.094-inch cross-section.

• The configuration is intended for maintenance applications where the specified compressor documentation calls for the corresponding oil pump service package and sealing component.

Key Strengths at a Glance

• Combines an oil pump service package with a dedicated O-ring sealing component.

• Supports replacement of the sealing element during oil pump maintenance or related compressor service.

• Helps maintain sealing integrity at the applicable oil-system interface.

• Suitable for planned maintenance programs requiring model-specific Ingersoll Rand service parts.

Technical FAQs

1. What is Ingersoll Rand 47689337001?

47689337001 is identified as an Ingersoll Rand oil pump service package for applicable R25/20 and CD26 compressor configurations.

2. What is Ingersoll Rand 95021804?

95021804 is an Ingersoll Rand O-ring identified with a nominal 1.062-inch inside diameter and 0.094-inch cross-section.

3. What are the approximate dimensions of 95021804?

The O-ring is listed at approximately 1.062 inches inside diameter with a 0.094-inch cross-section, corresponding to approximately 26.64 × 2.62 mm.

4. What is the function of the 95021804 O-ring?

The O-ring provides sealing at the applicable compressor interface and helps prevent leakage when correctly installed in its designated groove.

5. Is 95021804 a complete oil pump seal assembly?

No. 95021804 is an individual O-ring rather than a complete oil pump or seal assembly.

6. How are 47689337001 and 95021804 related?

For this product listing, the two supplied part numbers are treated as one complete service configuration, with 47689337001 identifying the oil pump service package and 95021804 identifying the associated O-ring.

7. Which compressor applications are associated with 95021804?

95021804 appears in Ingersoll Rand compressor parts listings and is associated with applicable compressor sealing applications. Exact equipment compatibility should be confirmed using the compressor model and serial number.

8. When should the 95021804 O-ring be replaced?

It should be replaced when the applicable oil pump or sealed connection is serviced, when the existing O-ring shows wear or damage, or when the maintenance procedure specifies replacement.

9. Can 95021804 be used on every Ingersoll Rand compressor?

No. O-ring dimensions, material, and application vary between compressor configurations. The specified part number should be verified before installation.

10. What should be verified before ordering this configuration?

The compressor model, serial number, existing O-ring part number, sealing dimensions, and applicable Ingersoll Rand service documentation should be checked for compatibility.