Introduction

The Foxboro P0916ND Base Station-to-Base Station Cable is a factory qualified interconnection component for Foxboro I/A Series DCS redundant base station pairs. Built to strict Foxboro industrial control standards, this 0.25-meter short-length cable is optimized for tightly packed control room rack arrangements where base station hardware sits adjacent to one another. Fully shielded internal conductors maintain precise signal timing critical for redundancy synchronization, ensuring the standby base station can instantly take over control duties if the primary unit experiences a fault. Every cable undergoes factory continuity and signal testing before shipment, delivering plug-and-play installation for integrators and plant maintenance teams upgrading or maintaining existing I/A Series control systems.

Technical Specifications

表格

Parameter	Value
Model	P0916ND
Product Type	Base Station-to-Base Station Cable
Cable Length	0.25 m
Cable Construction	Shielded multi-conductor industrial control cable
Application Environment	Indoor control cabinet
Operating Temperature	0°C ~ 70°C
Shipping Weight	3.00 kg / 6.61 lb

Recommended Related Models

Foxboro P0914WN Base Station Power Cable
Foxboro P0915XA Base Station IO Bus Cable
Foxboro P0920TB Rack Mount Adapter Bracket

Popular Related Models

Foxboro P0903YZ Base Station Interconnect Cable
Foxboro P0904TY Controller Bus Cable
Foxboro P0917NE Base Station-to-Base Station Cable

Applications

This Foxboro P0916ND cable is purpose-built for direct base station interconnection within I/A Series distributed control systems. It serves control room rack assemblies, redundant controller cabinet layouts, plant DCS retrofit projects, and critical process industries including chemical processing, oil & gas refining, pulp and paper manufacturing, and power generation plants. The cable maintains stable signal transmission between paired base stations, supporting hot standby redundancy setups to eliminate single points of failure in continuous production environments.

Advantages

Engineered to preserve signal integrity across short rack-mounted runs, this cable minimizes data distortion and cross-talk between linked base station hardware. Heavy-duty industrial-grade shielding effectively suppresses electromagnetic interference from nearby variable frequency drives and high-current power wiring. Factory-terminated connectors guarantee consistent pin alignment, cutting on-site wiring errors and installation time. Rugged jacket construction withstands repeated cabinet vibration and temperature fluctuations inside industrial control enclosures. Pre-tested at the factory reduces commissioning troubleshooting, supporting reliable redundant failover for mission-critical DCS operations.

Technical FAQs

Q: What DCS hardware family is this base station-to-base station cable designed to pair with? A: It is designed exclusively for Foxboro I/A Series base station hardware to facilitate redundant base station communication links.
Q: Does this cable support hot-swap base station failover during live plant operation? A: Yes, the cable maintains continuous communication paths required for seamless automatic failover between redundant base station pairs under normal operating conditions.
Q: Can I extend the total inter-base-station distance by chaining multiple P0916ND cables together? A: Chaining multiple cables is not recommended. System signal timing and impedance matching are calibrated for the factory fixed length; extensions may trigger communication dropouts.
Q: What type of signal does this cable carry between base stations? A: It transmits high-speed internal base station synchronization and status signals for redundancy handshaking, not standard field instrument analog or discrete IO signals.
Q: Is this cable rated for use outside of sealed electrical control cabinets? A: It is intended for indoor cabinet installation only, not rated for direct outdoor exposure or wet field locations.
Q: What impact will improper cable routing alongside AC power cables have on performance? A: Parallel routing with high voltage power cables can introduce EMI noise, degrade synchronization signals and potentially cause intermittent redundancy switching faults.
Q: Are the connectors field-repairable if pins become damaged during installation? A: This unit comes with factory crimped and sealed connectors; field re-termination is not supported and will void factory performance validation.
Q: Does this cable support operation in redundant DCS architectures with more than two base stations? A: This specific cable connects one base station directly to a second base station; multi-base station topologies require additional matching Foxboro cabling and system configuration.
Q: What kind of system diagnostics will alert operators if this communication cable develops a fault? A: The DCS will raise base station link alarms within the system HMI, flagging loss of synchronization between the paired base station units.
Q: Can this cable substitute for other Foxboro base station communication cable part numbers? A: No, each Foxboro cable part number uses unique pinout and impedance specifications; cross substitution will lead to communication failure.