Introduction

The Foxboro RH916NC Base Station-to-Base Station Cable is a model-specific interconnection component intended for industrial automation applications requiring a compatible cable connection between designated base stations.

In process control environments, cable selection is an important part of maintaining equipment compatibility and supporting consistent system operation. Choosing a replacement based on the complete part number, rather than appearance alone, helps reduce the risk of ordering an unsuitable component.

The supplied product information specifies a cable length of 3 meters. This makes length verification particularly important when planning replacement work or arranging connections within an industrial cabinet.

For automation maintenance teams, system integrators, and industrial spare-parts buyers, the RH916NC is a useful model reference for procurement inquiries. Confirm the connector details, equipment compatibility, and exact product designation before placing an order.

Technical Specifications

Parameter	Specification
Brand	Foxboro
Model Number	RH916NC
Product Type	Base Station-to-Base Station Cable
Cable Length	3 meters
Shipping Weight	3.00 kg / 6.61 lb
Connector Type	Not independently confirmed
Intended Application	Base station interconnection
System Compatibility	Requires verification
Product Dimensions	Not confirmed
Net Product Weight	Not confirmed

Specification Note: The supplied weight is the shipping weight. The actual net weight of the cable may differ. Product dimensions and connector specifications have not been confirmed, so no unsupported values are provided.

Recommended Related Models

The following Foxboro cable models are potential alternatives to investigate when evaluating compatible cable requirements. They should not be treated as direct substitutes for the RH916NC without confirming their intended applications.

Model	Product Type	Selection Consideration
Foxboro RH916DC	Termination Cable	Verify connector type and system application
Foxboro RH928AD	LSZH Termination Cable	Confirm cable type and interface compatibility
Foxboro RH916DB	Termination Cable	Check specified cable length and application
Foxboro RH916DD	Termination Cable	Verify connection requirements before selection

Select a replacement only after confirming the required cable type, connector arrangement, and compatibility with the installed system.

Popular Related Models

For buyers maintaining Foxboro automation installations, the following cable models may also be relevant to broader termination and field I/O connection requirements.

Model	Product Category	Application Consideration
Foxboro RH916DA	Termination Cable	Verify suitability for the intended termination assembly
Foxboro RH916DE	Termination Cable	Check required cable length and connection type
Foxboro RH928AA	LSZH Termination Cable	Confirm cable material requirements and compatibility
Foxboro RH928AF	LSZH Termination Cable	Verify the intended system interface

These are related cable models, not confirmed replacements for the RH916NC. Confirm the exact part number and technical requirements before purchasing.

Applications

The Foxboro RH916NC Base Station-to-Base Station Cable is an industrial automation cable identified for base station interconnection applications. For maintenance engineers and system integrators, selecting the correct cable is essential to maintaining the intended configuration of compatible Foxboro control system equipment.

Control System Interconnection: Intended for base station connection applications where the required interfaces and system compatibility have been confirmed.
Industrial Automation Maintenance: Can be considered when replacing an existing cable in a compatible installation.
Control Cabinet Wiring: The specified 3-meter length may suit installations requiring a relatively short cable run.
Spare Parts Inventory: Provides a specific model number for purchasing teams managing industrial automation replacement components.
System Service and Troubleshooting: Helps maintenance personnel identify the cable required for an approved replacement procedure.

Before installation, verify the exact application and connector compatibility with the equipment documentation.

Advantages

Clear Model Identification

The RH916NC model number helps purchasing teams identify the requested component and distinguish it from other Foxboro cables with different specifications.

Practical Connection Length

With a stated length of 3 meters, the cable may be suitable for installations where the connection distance is within the specified range.

Simplified Spare Parts Planning

Keeping the correct replacement cable available can help maintenance teams prepare for planned servicing and reduce delays associated with component procurement.

Support for Existing Automation Systems

For facilities operating established Foxboro equipment, identifying the correct cable is an important step in maintaining the original system configuration.

Convenient Industrial Procurement

The RH916NC provides a specific reference for quotation requests, inventory management, and replacement-part inquiries. Buyers should confirm the complete model number and intended use before ordering.

Technical FAQs

Q1: What is the intended function of the Foxboro RH916NC?

It is identified as a base station-to-base station cable. Its exact connection function should be confirmed against the relevant Foxboro equipment documentation.

Q2: Is the RH916NC compatible with every Foxboro base station?

No. Compatibility should be verified against the specific base station models, connector interfaces, and system configuration.

Q3: Can the RH916NC be used as a general-purpose signal cable?

It should not be treated as a universal signal cable. Use it only for applications supported by its verified technical specifications.

Q4: What should be checked before connecting the cable?

Confirm the model number, connector arrangement, equipment interfaces, and applicable installation requirements.

Q5: Can this cable be used for system expansion?

Potentially, provided the planned configuration requires this specific cable and is supported by the installed equipment. Confirm compatibility before integration.

Q6: Does the cable require an additional adapter?

This depends on the equipment interfaces. Consult the system documentation to determine whether an adapter or other connection hardware is required.

Q7: Is it safe to disconnect the cable while the system is running?

Do not assume that live disconnection is supported. Follow the equipment manufacturer's maintenance procedures and isolate the relevant equipment when required.

Q8: How should the cable be maintained?

Inspect the cable jacket and connectors for damage, contamination, and mechanical strain. Follow the approved inspection and replacement procedures for the installation.

Q9: What should be investigated if a connection problem occurs?

Check the system alarms, connection points, cable condition, and recent maintenance history. Other equipment faults may produce similar symptoms, so use a systematic troubleshooting process.

Q10: How can the correct replacement be selected?

Compare the complete model number and connector configuration with the existing installation, then verify the intended application against the relevant equipment specifications.

Look forward to your comments!Comment