Introduction

The Foxboro P0916UH Cable is listed with a specified cable length of 20 meters, making length an important consideration when evaluating it for an industrial automation installation. In process control environments, the correct cable must meet both the physical routing requirements and the technical requirements of the connected equipment.

Longer cable runs can provide greater flexibility when equipment is distributed across cabinets or installation areas. However, the appropriate cable depends on more than length alone. Connector interfaces, electrical characteristics, environmental conditions, and system compatibility must also be considered.

For industrial maintenance engineers, system integrators, and spare-parts purchasing teams, accurate part identification helps simplify procurement and replacement planning. The P0916UH model number provides a starting point for identifying the requested component, but its precise function should be verified before use.

When sourcing this cable, confirming the original equipment specification and connector details helps reduce the risk of purchasing an unsuitable replacement and supports more effective maintenance planning.

Technical Specifications

Parameter	Specification
Brand	Foxboro
Model Number	P0916UH
Product Type	Industrial Cable
Cable Length	20 meters
Shipping Weight	3.00 kg / 6.61 lb
Connector Type	Not confirmed
Electrical Characteristics	Not confirmed
Intended Application	Requires verification
System Compatibility	Requires verification
Product Dimensions	Not confirmed
Net Product Weight	Not confirmed

Technical Note: The supplied 3.00 kg figure refers to shipping weight and may include packaging. The net product weight, physical dimensions, connector configuration, and precise cable function have not been independently confirmed. Verify these details before making installation or purchasing decisions.

Recommended Related Models

The following Foxboro cable models may be useful when reviewing related connection and termination requirements. They are potential related products rather than confirmed direct replacements for the P0916UH.

Model	Product Type	Selection Consideration
Foxboro P0916NB	Industrial Cable	Verify intended function and interface
Foxboro P0916NC	Base Station-to-Base Station Cable	Confirm base station compatibility
Foxboro RH916NB	Industrial Cable	Check the original cable specification
Foxboro RH916NC	Base Station-to-Base Station Cable	Verify connector configuration and intended use

The correct alternative depends on the application and equipment interface. Confirm the full model number before selecting a replacement.

Popular Related Models

For broader Foxboro automation maintenance and spare-parts sourcing, the following cable models may also be worth reviewing for specific termination applications.

Model	Product Type	Cable Length
Foxboro RH916DA	Type 1 P/PVC Termination Cable	0.5 m
Foxboro RH916DC	Type 1 P/PVC Termination Cable	3 m
Foxboro RH916DD	Type 1 P/PVC Termination Cable	5 m
Foxboro RH916DE	Type 1 P/PVC Termination Cable	10 m

These termination cables serve specific connection requirements and are not confirmed substitutes for the P0916UH. Verify the required cable function, length, connector arrangement, and system compatibility before ordering.

Applications

The Foxboro P0916UH Cable is an industrial cable identified for use in automation-related procurement and maintenance workflows. In process control environments, selecting the correct cable helps maintain the intended connections between compatible equipment and supports reliable system operation.

With a specified length of 20 meters, this cable may be considered for installations that require a longer cable route. Its precise function and compatibility should be confirmed against the applicable Foxboro equipment documentation before installation.

Industrial Automation Maintenance: Supports replacement planning when the existing component has been positively identified as P0916UH.
Control System Installation: Can be evaluated for connection requirements within compatible Foxboro installations after the interface specifications have been verified.
Extended Cable Routing: The stated 20-meter length provides a useful reference when planning connections between equipment positioned farther apart.
Spare Parts Management: Offers a specific model designation for inventory records, maintenance preparation, and purchasing inquiries.
Industrial Equipment Servicing: Helps maintenance teams identify the requested cable when arranging replacement work or investigating connection issues.

Advantages

Extended 20-Meter Reach

The specified cable length provides additional routing flexibility for installations requiring a longer connection path. Proper cable selection should still account for the electrical requirements and supported connection distance of the equipment.

Clear Model Identification

The P0916UH designation gives purchasing teams a specific reference when requesting quotations, organizing stock, and identifying replacement components.

Support for Planned Maintenance

Preparing the correct cable before servicing helps maintenance teams organize replacement work and reduce delays caused by incomplete spare-parts inventories.

Flexible Installation Planning

A 20-meter cable can accommodate longer routing paths where supported by the system design. Installers should consider mechanical protection, bend radius, strain relief, and electromagnetic interference.

Practical Procurement Information

The specified cable length and shipping weight provide basic information for purchasing and logistics planning. Verifying the exact manufacturer part number and technical specifications remains essential before ordering.

Technical FAQs

Q1: What is the intended function of the Foxboro P0916UH Cable?

The exact application cannot be established from the model number and cable length alone. Confirm its intended function using the relevant Foxboro product documentation or the original equipment specification.

Q2: Is the P0916UH compatible with all Foxboro control systems?

No. Compatibility depends on the specific equipment, connector configuration, electrical characteristics, and intended application.

Q3: Can the P0916UH replace another Foxboro cable?

Only when the replacement cable has been confirmed to meet the original cable's requirements. Similar model names or physical appearances do not guarantee equivalent functionality.

Q4: What information is needed to confirm cable compatibility?

Check the full part number, equipment models at both connection points, connector types, pin assignments, and applicable electrical specifications.

Q5: Does a 20-meter length guarantee suitability for a long-distance connection?

No. The supported connection distance depends on the cable's electrical characteristics and the equipment interface. Confirm the manufacturer's specifications before installation.

Q6: Can the cable be used for industrial communication?

Its supported communication function or protocol has not been confirmed. Verify the intended application before connecting it to a communication interface.

Q7: Is live connection or disconnection supported?

This should not be assumed. Follow the equipment manufacturer's maintenance procedures and isolate the relevant system when required.

Q8: What should be inspected if the connected equipment experiences intermittent faults?

Inspect the connectors, cable jacket, connection security, and routing. Review system diagnostics as well, since intermittent faults may originate from other components.

Q9: How should a 20-meter industrial cable be routed?

Follow the applicable installation requirements for bend radius, strain relief, mechanical protection, environmental exposure, and separation from potential sources of electromagnetic interference.

Q10: What should be verified before purchasing the P0916UH?

Confirm the manufacturer, exact part number, intended function, connector arrangement, compatibility, product condition, and specified cable length before placing an order.

Look forward to your comments!Comment