Introduction

The Schneider MTE08H Circuit Breaker is a model-specific component to consider when sourcing electrical protection equipment for industrial and commercial installations. Selecting a suitable breaker requires careful evaluation of the system's operating conditions, fault-interruption requirements, and installation constraints.

For maintenance engineers, panel builders, electrical contractors, and procurement teams, the complete model designation is an important starting point for identifying the required device. It should be accompanied by verification of the electrical ratings, trip characteristics, connection arrangement, and mechanical compatibility.

When sourcing the MTE08H, confirm the exact product version and compare its specifications with the intended application. This helps reduce purchasing errors and supports reliable electrical equipment maintenance.

Technical Specifications

Parameter	Specification
Brand	Schneider Electric
Model	MTE08H
Product Type	Circuit Breaker
Dimensions (L × W × H)	322 × 228 × 277 mm
Weight	30 kg
Weight in Pounds	66.14 lb
Rated Current	Verify against the product nameplate
Rated Voltage	Verify against exact model documentation
Breaking Capacity	Confirm from manufacturer specifications
Pole Configuration	Verify for the supplied version
Trip Characteristics	Confirm for the supplied version
Mounting and Connections	Verify before installation

Note: Dimensions and weight are based on the supplied product information. Confirm electrical ratings, protection characteristics, and installation requirements against the documentation for the exact device before purchasing or commissioning.

Recommended Related Models

The following Schneider model designations may be useful starting points when researching related circuit-breaker requirements. Confirm their exact product specifications and compatibility before treating any model as an alternative to the MTE08H.

Model	Product Type
Schneider MTE06N	Circuit Breaker
Schneider MTE08N	Circuit Breaker
Schneider MTE10N	Circuit Breaker
Schneider MTE12N	Circuit Breaker
Schneider MTE16N	Circuit Breaker

Popular Related Models

For industrial spare-parts procurement and electrical maintenance planning, buyers may also review these Schneider model designations when comparing product requirements.

Model	Selection Consideration
Schneider MVS12H	Verify ratings and configuration
Schneider MVS16H	Verify ratings and configuration
Schneider MVS20H	Verify ratings and configuration
Schneider MTE08H	Specified model; confirm nameplate details
Schneider MT20N2	Verify product family and electrical compatibility

Procurement recommendation: Similar model numbers do not guarantee direct interchangeability. Before ordering, confirm the complete model designation, rated current, operating voltage, breaking capacity, trip configuration, mounting arrangement, and terminal requirements.

Applications

The Schneider MTE08H Circuit Breaker is a model-specific electrical component for use in compatible power distribution and circuit protection systems. In industrial facilities, electrical panels, and commercial installations, circuit breakers help manage electrical circuits and interrupt fault currents within their specified operating limits.

Potential application areas include:

Industrial electrical distribution: Integration into compatible distribution assemblies.
Manufacturing facilities: Supporting circuit protection for electrical infrastructure serving production equipment.
Switchboards and electrical panels: Installation in assemblies that meet the device's verified electrical and mechanical requirements.
Commercial power systems: Supporting organized power distribution in appropriately engineered installations.
Maintenance and replacement projects: Sourcing a specified breaker after confirming compatibility with the existing equipment.

Before selecting the MTE08H, verify the rated current, operating voltage, breaking capacity, trip characteristics, and mounting requirements using the exact product nameplate and applicable technical documentation.

Advantages

1. Supports Circuit Protection

A correctly selected circuit breaker helps interrupt electrical faults within its specified operating limits, contributing to the protection of connected circuits and equipment.

2. Supports Electrical System Reliability

When properly integrated into a suitable distribution assembly, the breaker contributes to an organized electrical protection arrangement.

3. Simplifies Replacement Identification

Using the complete MTE08H designation helps maintenance teams and purchasing departments identify the required component more accurately.

4. Helps Maintain Protection Coordination

Appropriate coordination with other protective devices can help isolate faults and reduce unnecessary interruptions to unaffected circuits.

5. Facilitates Spare-Parts Management

Accurate model identification supports inventory control and helps reduce confusion when sourcing electrical replacement components.

6. Encourages Specification-Based Procurement

Verifying ratings, connections, and installation requirements before purchasing helps minimize the risk of ordering an incompatible device.

Technical FAQs

Q1: What is the purpose of the Schneider MTE08H Circuit Breaker?

Its product category is a circuit breaker for electrical switching and protection. The precise functions and operating characteristics should be confirmed from the documentation for the supplied model.

Q2: How can I determine the rated current of the MTE08H?

Check the product nameplate and applicable technical documentation. Do not infer the rated current from the model designation alone.

Q3: What is breaking capacity?

Breaking capacity is the maximum fault current a circuit breaker can interrupt under specified conditions. The selected device must be appropriate for the prospective short-circuit current at its installation point.

Q4: Is the MTE08H suitable for an industrial control panel?

Suitability depends on the panel design, electrical ratings, mounting requirements, connections, and protection characteristics of the exact device.

Q5: Why must circuit-breaker protection be coordinated?

Coordination helps ensure that the appropriate protective device responds to a fault, reducing unnecessary interruption to other parts of the electrical system.

Q6: Can the MTE08H replace a breaker from another series?

Not automatically. Compare rated voltage and current, breaking capacity, pole configuration, trip characteristics, mounting arrangement, and terminal compatibility before approving a replacement.

Q7: What should be inspected before commissioning?

Qualified personnel should verify the installation, terminal connections, electrical ratings, protection settings where applicable, and compliance with the manufacturer's instructions and local electrical requirements.

Q8: What could cause the breaker to trip repeatedly?

Possible causes include overload, short circuit, ground fault where applicable, unsuitable protection settings, or a problem with connected equipment. The underlying cause should be identified before restoring power.

Q9: Does the MTE08H require additional protection devices?

This depends on the exact device configuration and the electrical system design. A qualified professional should assess whether additional protective functions are necessary.

Q10: What details are needed when ordering a replacement MTE08H?

Provide the full model designation, nameplate photographs, electrical ratings, trip-unit details if applicable, quantity, and information about the existing installation to help confirm compatibility.

Look forward to your comments!Comment