Introduction

The Schneider MTE10H Circuit Breaker is a model-specific component for consideration in industrial electrical distribution, equipment maintenance, and replacement procurement. Choosing the appropriate breaker requires more than matching the product name or external appearance; its electrical ratings, fault-interruption capability, protection characteristics, and installation requirements must also meet the system design.

For maintenance engineers, electrical contractors, panel builders, and industrial buyers, accurate model identification helps streamline purchasing and spare-parts management. Before ordering the MTE10H, verify the exact product version and compare its specifications with the requirements of the intended installation.

Careful technical verification helps reduce the risk of incompatible replacements and supports reliable electrical system operation.

Technical Specifications

Parameter	Specification
Brand	Schneider Electric
Model	MTE10H
Product Type	Circuit Breaker
Dimensions (L × W × H)	322 × 228 × 277 mm
Weight	30 kg
Weight in Pounds	66.14 lb
Rated Current	Verify against the product nameplate
Rated Voltage	Verify against exact model documentation
Breaking Capacity	Confirm from manufacturer specifications
Pole Configuration	Verify for the supplied version
Trip Characteristics	Confirm for the supplied version
Mounting and Connections	Verify before installation

Note: Dimensions and weight are based on the supplied product information. Confirm electrical ratings, protection characteristics, and installation requirements against the documentation for the exact device before purchasing or commissioning.

Recommended Related Models

The following Schneider model designations may be useful starting points for further product identification. Verify their existence in the applicable product family and compare their specifications before considering them alternatives to the MTE10H.

Model	Product Type
Schneider MTE06N	Circuit Breaker — verify exact specifications
Schneider MTE08N	Circuit Breaker — verify exact specifications
Schneider MTE10N	Circuit Breaker — verify exact specifications
Schneider MTE12N	Circuit Breaker — verify exact specifications
Schneider MTE16N	Circuit Breaker — verify exact specifications

Popular Related Models

For industrial maintenance and spare-parts sourcing, buyers may also investigate the following Schneider model designations when reviewing their equipment requirements.

Model	Selection Consideration
Schneider MTE08H	Verify ratings and configuration
Schneider MTE10H	Specified model; confirm nameplate details
Schneider MVS12H	Verify product family and electrical compatibility
Schneider MVS16H	Verify product family and electrical compatibility
Schneider MT20N2	Verify product family and electrical compatibility

Procurement recommendation: Similar model numbers do not guarantee direct interchangeability. Before ordering, confirm the complete model designation, rated current, operating voltage, breaking capacity, trip configuration, mounting arrangement, and terminal requirements.

Applications

The Schneider MTE10H Circuit Breaker is a model-specific electrical component for applications requiring suitable circuit switching and protection within an electrical distribution system. In industrial facilities and commercial installations, selecting the correct breaker helps protect circuits against specified electrical faults and supports reliable operation of connected equipment.

Potential application areas include:

Industrial power distribution: Integration into compatible electrical distribution assemblies.
Manufacturing facilities: Supporting circuit protection for factory electrical infrastructure and production systems.
Electrical switchboards: Installation in assemblies that meet the breaker's verified electrical and mechanical requirements.
Commercial electrical installations: Supporting power distribution in appropriately designed systems.
Equipment maintenance: Sourcing a specific breaker for replacement projects after confirming compatibility with the original installation.

Before purchasing the MTE10H, verify its rated current, operating voltage, breaking capacity, trip characteristics, and mounting requirements against the product nameplate and applicable technical documentation.

Advantages

1. Supports Circuit Protection

A properly selected circuit breaker helps interrupt fault currents within its specified operating limits, contributing to the protection of electrical circuits and connected equipment.

2. Supports Organized Electrical Distribution

When matched to the installation design, the breaker can form part of an organized circuit protection arrangement.

3. Simplifies Model Identification

The full MTE10H designation helps maintenance personnel and procurement teams identify the required component when sourcing replacement equipment.

4. Helps Maintain Protection Coordination

Correct coordination with other protective devices can help isolate electrical faults and reduce unnecessary interruptions to unaffected circuits.

5. Facilitates Spare-Parts Planning

Accurate model identification supports inventory management and helps reduce confusion when purchasing electrical replacement components.

6. Encourages Compatibility Checks

Reviewing the electrical ratings, mounting requirements, and terminal arrangement before installation helps minimize replacement errors.

Technical FAQs

Q1: What is the function of the Schneider MTE10H Circuit Breaker?

Its product category is a circuit breaker intended for electrical switching and protection. Confirm the specific protection functions and operating characteristics from the documentation for the exact device.

Q2: How can I confirm the rated current of the MTE10H?

Check the product nameplate and applicable technical documentation. The model number alone should not be treated as confirmation of the rated current.

Q3: What does breaking capacity mean?

Breaking capacity is the fault current a circuit breaker can interrupt under specified conditions. The selected breaker must be suitable for the prospective short-circuit current at the installation point.

Q4: Can the MTE10H be used in an industrial electrical panel?

Its suitability depends on the panel design, electrical ratings, mounting arrangement, connection requirements, and protection characteristics of the exact model.

Q5: Why is protection coordination important?

Protection coordination helps ensure that the appropriate device responds to a fault, limiting unnecessary interruption to other parts of the electrical system.

Q6: Can the MTE10H replace another Schneider breaker?

Not automatically. Compare the complete model designation, rated current, voltage, breaking capacity, pole configuration, trip characteristics, and mechanical connections before approving a replacement.

Q7: What should be checked before commissioning?

Qualified personnel should verify the mounting, terminal connections, electrical ratings, protection settings where applicable, and compliance with the manufacturer's instructions and local electrical requirements.

Q8: What could cause repeated tripping?

Possible causes include overload, short circuit, ground fault where applicable, incorrect protection settings, or a problem with connected equipment. Investigate the cause before attempting to restore operation.

Q9: Does the MTE10H require additional protective devices?

This depends on the protection functions of the exact device and the overall electrical system design. A qualified electrical professional should determine whether supplementary protection is necessary.

Q10: What information should I provide when requesting a quotation?

Provide the full model number, nameplate photographs, electrical ratings, trip-unit details if applicable, quantity, and information about the existing installation. These details help establish product compatibility.

Look forward to your comments!Comment