Brand:Schneider PLC Item No.:AM0FIP001V000 Product Origin:France Product Dimensions:155 x 25 x 120 mm Product Weight:0.14 kg Payment:T/T, Western Union, Credit Card Goods_stock:15 Shipping Port:Xiamen, China Lead Time:1-3 Days Condition:Brand New And Original Warranty:1 Year Certificate:COO
The Schneider AM0FIP001V000 is a FIPIO communication option card associated with the Lexium servo drive product range. It provides a network interface that allows compatible servo drives to exchange data with a FIPIO bus manager and other supported automation devices.
In a motion-control application, communication between the controller and servo drive is important for exchanging operating commands, drive status, and motion-related information. The AM0FIP001V000 supports this connection through the FIPIO fieldbus architecture.
The card is documented with a 9-pin male SUB-D connector and a 1 Mbps communication rate. Its configuration and diagnostic functions support commissioning and maintenance activities in compatible Lexium installations.
unisgroup.bg+1
For replacement projects, buyers and maintenance engineers should verify the exact servo drive model, card revision, bus wiring, and configuration requirements before ordering.
Technical Specifications
Parameter
Specification
Brand
Schneider Electric
Model
AM0FIP001V000
Product Type
FIPIO Communication Card
Product Range
Lexium
Communication Protocol
FIPIO
Connector Type
9-pin male SUB-D
Communication Speed
1 Mbps
Dimensions (W × D × H)
155 × 25 × 120 mm
Weight
0.14 kg / 0.31 lb
Typical Application
Lexium servo drive network integration
Note: Confirm the supported drive models, hardware revision, installation requirements, and network accessories against the equipment documentation before commissioning.
Recommended Related Models
The following Schneider Electric products and accessories are relevant to FIPIO-based motion-control installations:
AM0MBP001V000 – Lexium Modbus Plus communication option card; a different network interface, not a direct FIPIO substitute.
AM0ETH001V000 – Lexium Ethernet communication option card.
AM0SER001V000 – Lexium SERCOS communication option card.
TSXFPACC2 – FIPIO network connector accessory.
TSXFPACC12 – FIPIO network connection accessory.
Select communication options according to the drive's supported interfaces and the network architecture.
Amplifier+1
Popular Related Models
The following Schneider Electric products are associated with industrial automation and motion-control systems:
Lexium 15 – Servo drive family designed for industrial motion-control applications.
TSXP57253M – Modicon Premium PLC processor model.
TSXP57353M – Modicon Premium PLC processor model.
TSXFPACC2 – FIPIO bus connector.
TSXFPACC7 – FIPIO bus termination accessory.
Compatibility depends on the specific controller, servo drive, communication configuration, and network design. Verify the complete system requirements before selecting related equipment.
Applications
The Schneider AM0FIP001V000 FIPIO Communication Card is an optional communication interface designed for connecting compatible Lexium servo drives to a FIPIO industrial fieldbus network. It enables data exchange between motion-control equipment and a higher-level automation system, supporting coordinated machine operation and centralized monitoring.
Typical application areas include:
Servo drive communication: Connect compatible Lexium servo drives to a FIPIO network.
Motion control systems: Exchange operating commands, status information, and motion-related data.
Automated production machinery: Integrate servo drives into distributed industrial control architectures.
Industrial network integration: Connect compatible field devices to a FIPIO bus managed by a PLC.
Equipment maintenance: Support drive diagnostics and parameter access through the communication network.
Advantages of the AM0FIP001V000 Communication Card
Dedicated FIPIO connectivity
The card provides a communication interface for compatible servo drives operating within Schneider Electric FIPIO-based automation systems.
Motion-control data exchange
It supports communication of drive operating information and motion-related parameters between the servo drive and the control system.
Access to drive parameters
When used with the appropriate configuration tools, the interface supports reading and writing drive parameters for setup and operation.
Network-based diagnostics
Communication status can be monitored through the card's diagnostic indicators, helping maintenance personnel identify communication-related problems.
Integration with industrial automation
The card helps connect compatible Lexium equipment to a broader control architecture based on FIPIO communication.
Technical FAQs
1. What is the main function of the Schneider AM0FIP001V000?
It is an optional FIPIO communication card used with compatible Lexium servo drives to provide connectivity to a FIPIO industrial network.
2. Which equipment is the AM0FIP001V000 designed for?
It is associated with Schneider Electric Lexium servo drive systems, including the Lexium 15 range. Confirm the exact drive model and hardware compatibility before installation.
3. What communication network does this card support?
The card supports FIPIO communication, an industrial fieldbus technology used for data exchange between compatible automation controllers and field devices.
4. What type of connector does the card use?
The documented interface uses a 9-pin male SUB-D connector for FIPIO network connection. The appropriate bus connector and cabling accessories must be selected for the installation.
5. What is the communication speed of the AM0FIP001V000?
The documented FIPIO card communication speed is 1 Mbps. Network configuration and connected equipment must support the corresponding communication settings.
6. Can the card be used to monitor servo drive operating conditions?
Yes. It supports the exchange of drive operating and status information through the FIPIO network, subject to the drive configuration and available communication services.
7. What should be checked if the FIPIO connection fails?
Inspect the bus cable, connectors, network termination, node address, communication configuration, and status indicators. Also check whether the FIPIO bus manager is operating correctly.
8. How is the FIPIO node address configured?
For the documented Lexium 15 application, the FIPIO address can be configured through the drive's available setup interface or supported configuration software. The address must be unique within the network.
9. Can the AM0FIP001V000 be replaced by another communication card?
It should not be replaced with a different communication option unless the replacement is confirmed to support the same drive hardware, network protocol, and application requirements.
10. What should be checked before installing a replacement card?
Confirm the complete model number, drive compatibility, connector arrangement, firmware or hardware requirements, and FIPIO network configuration. Record the existing node address and communication parameters before removing the original card.
