Bently Nevada 330130-040-00-00 3300 XL Standard Extension Cable

Applications

The Bently Nevada 330130-040-00-00 Standard Extension Cable is designed to extend the reach of 3300 XL Proximitor Sensors in industrial machinery monitoring systems. It is widely used in turbine halls, compressor stations, pump rooms, and other critical rotating equipment areas where sensor-to-monitor distances exceed the standard cable length. The extension cable allows flexible routing through tight or obstructed areas while maintaining signal integrity for accurate vibration and position measurement.

Advantages

• Maintains signal fidelity over extended distances, ensuring accurate displacement and vibration readings

• Flexible installation for complex plant layouts, accommodating tight or obstructed routing paths

• High durability with industrial-grade insulation to withstand temperature variations, oil mist, and mechanical stress

• Plug-and-play compatibility with all 3300 XL Proximitor Sensors

• Lightweight design minimizes mechanical strain on sensor connections

FAQs

1. What is the maximum recommended extension cable length?
   The 330130-040-00-00 is designed for 4.0-meter extensions; longer lengths should be verified with the 3300 XL system guidelines.

2. Does this cable affect the sensor’s linearity?
   No, the cable is shielded and impedance-matched to maintain the linear output of the Proximitor sensor.

3. What type of shielding does the cable use?
   It features foil and braided shielding to minimize electromagnetic interference (EMI).

4. Can this cable be routed near high-voltage power lines?
   Yes, but it is recommended to maintain proper separation and grounding to avoid induced noise.

5. Is the cable resistant to oil and chemical exposure?
   Yes, it uses industrial-grade insulation suitable for typical turbine hall or compressor room conditions.

6. What connector type does this extension cable use?
   It uses standard 3300 XL Proximitor connectors for direct plug-in compatibility.

7. Does cable length affect frequency response of the sensor?
   No, the cable is designed to preserve high-frequency vibration signals up to the Proximitor’s rated bandwidth.

8. Can multiple extension cables be daisy-chained?
   Yes, but total length and system specifications should be checked to ensure signal integrity.

9. Is this cable compatible with older 3300 system models?
   It is primarily designed for 3300 XL, although it may be used with previous models with proper verification.

10. What installation practices minimize signal loss?
    Use proper grounding, avoid sharp bends, and keep separation from EMI sources to ensure optimal performance.