Bently Nevada 330730-080-01-CN 3300 XL 11 mm Extension Cable
Bently Nevada 330730-080-01-CN 3300 XL 11 mm Extension Cable
0.0
Points
Brand:Bently Nevada PLC Item No.:330730-080-01-CN Product Origin:USA Product Dimensions:Cable Length: 8 meters Product Weight:0.36 kg Payment:T/T, Western Union, Credit Card Goods_stock:15 Shipping Port:Xiamen, China Lead Time:1-3 Days Condition:Brand New And Original Warranty:1 Year Certificate:COO
This cable is part of the Bently Nevada 3300 XL 11 mm vibration monitoring chain. It connects field-mounted proximity probes to the monitoring system, making it possible to place sensors where they are mechanically needed while keeping the electronics in a safe control cabinet.
Technical Specifications
Item
Specification
Product Type
3300 XL 11 mm Extension Cable
System Compatibility
Bently Nevada 3300 XL 11 mm system
Function
Probe signal extension
Shielding
Industrial EMI shielded cable
Installation Type
Fixed routing in machinery systems
Application
Turbines, compressors, pumps, gearboxes
Cable Length
8 m
Weight
0.36 kg
Recommended Related Models
Model
Product Name
330730-040-01-CN
3300 XL 11 mm Extension Cable 4 m
330730-065-01-CN
3300 XL 11 mm Extension Cable 6.5 m
330130-080-10-CN
3300 XL Standard Extension Cable 8 m
330190-080-01-00
3300 XL ETR Extension Cable 8 m
Popular Related Models
Model
Product Name
330103-00-05-10-02-00
3300 XL 11 mm Proximity Probe
330104-02-24-10-01-00
3300 XL 8 mm Proximity Probe
330105-20-12-10-02-00
3300 XL Reverse Mount Probe
330180-X1-00
3300 XL Preamplifier Sensor
Applications
• Steam turbine vibration systems where probe signals need to be routed back to the monitoring rack over longer distances
• Gas compressor packages with split layouts between field-mounted probes and centralized control cabinets
• Hydro turbine installations where equipment span requires extended signal routing paths
• Industrial pump systems where vibration points are located far from the protection system panel
• Gearbox and rotating machinery setups that require stable signal transmission across large machine bases
Key Advantages
• Works directly with Bently Nevada 3300 XL 11 mm proximity probe systems without extra adaptation
• 8-meter length fits typical industrial layouts where sensors and monitors are not physically close
• Shielding is strong enough to handle interference from motors, drives, and switchgear in real plant conditions
• Signal stays stable over distance, so vibration readings don’t fluctuate due to cable routing
• Built for long-term installation in vibration-heavy environments without frequent replacement
• Installation is straightforward and usually follows existing cable routes without redesign
Technical FAQs
Q1: Is this cable only for 11 mm probes?
Yes, it is designed specifically for the 3300 XL 11 mm system.
Q2: Can it be used with 8 mm probes?
No, it is not intended for 8 mm configurations.
Q3: Will the signal degrade over 8 meters?
No, within system limits the signal remains stable.
Q4: Can it run near power cables?
Short distances are usually acceptable, but long parallel runs should be avoided.
Q5: Does it need calibration?
No calibration is required for the cable.
Q6: Can it be replaced without changing the probe?
Yes, it can be swapped independently.
Q7: Is it suitable for outdoor use?
Only if it is installed in proper protective conduit.
Q8: Does it work in high EMI areas?
Yes, shielding is designed for industrial noise environments.
Q9: What systems is it commonly used in?
Power plants, oil & gas facilities, and heavy industrial machinery.
Q10: Does installation require special setup?
No special configuration is needed beyond standard 3300 XL wiring practice.
