Where It Excels in Industrial Use

• High-Accuracy Shaft Vibration Monitoring
The Bently Nevada 330101-26-52-10-02-05 3300 XL 8 mm Proximity Probe is engineered for precise non-contact measurement of shaft vibration, radial displacement, and position changes in rotating machinery. Its eddy-current sensing technology provides stable and repeatable measurement performance for machinery protection and predictive maintenance applications.

• Critical Rotating Equipment Protection
Designed for turbines, compressors, pumps, generators, and other fluid-film bearing machines, this probe delivers reliable shaft condition data to help operators detect abnormal vibration behavior and maintain equipment reliability. The 3300 XL 8 mm system is commonly used for both vibration and position measurement applications.

• Industrial Monitoring System Integration
The probe is designed to operate as part of a complete 3300 XL 8 mm proximity transducer system, working together with an extension cable and Proximitor Sensor to provide conditioned displacement signals for machinery monitoring platforms.

• Harsh Plant Environment Applications
With a rugged 8 mm probe construction, standard cable configuration, and agency approval option, this model is suitable for demanding applications in power generation, oil & gas, petrochemical, and process industries. 

Key Strengths at a Glance

• 3300 XL 8 mm Eddy-Current Technology
Provides accurate non-contact shaft measurement by detecting changes in the electromagnetic field between the probe tip and the rotating target surface.

• 52 mm Case Length Configuration
The 52 option defines the probe case length configuration, providing mechanical flexibility for installations requiring a specific mounting depth.

• 1 Meter Total Length Design
The 10 option specifies a 1.0-meter probe system length, making it suitable for compact machinery layouts where the probe is installed close to monitoring electronics.

• ClickLoc Connector with Standard Cable
The 02 connector option uses a miniature coaxial ClickLoc connector with standard cable, improving installation convenience and ensuring dependable signal transmission. 

Technical FAQs

1. What is the primary function of the Bently Nevada 330101-26-52-10-02-05 probe?
It measures shaft vibration and displacement using non-contact eddy-current sensing technology for rotating machinery monitoring.

2. Which product family does this probe belong to?
It belongs to the Bently Nevada 3300 XL 8 mm Proximity Probe family.

3. What measurement principle does this probe use?
It uses eddy-current technology to detect the distance between the probe tip and a conductive rotating shaft surface.

4. Does this probe provide a direct monitoring output signal?
No. The probe generates a raw displacement signal that requires a compatible Proximitor Sensor for signal conditioning.

5. What type of equipment commonly uses this probe?
It is commonly applied on turbines, compressors, pumps, generators, motors, and other rotating machinery.

6. What does the 8 mm probe designation indicate?
The 8 mm designation refers to the probe sensing diameter and measurement system category.

7. What is the purpose of the Proximitor Sensor in this system?
The Proximitor Sensor converts the probe signal into a usable output voltage proportional to shaft displacement.

8. Can this probe measure both vibration and shaft position?
Yes. When combined with compatible electronics, it can measure both dynamic vibration and static shaft position.

9. What should be checked before replacing this probe?
Users should confirm probe series, thread configuration, case length, system length, connector type, and approval requirements.

10. Which systems are compatible with this probe?
It is designed for use with compatible Bently Nevada 3300 XL Proximitor Sensors and monitoring systems.