Brand:GE Fanuc PLC Item No.:HE693PBM100 Product Origin:USA Product Dimensions:109 × 64 × 58 mm Product Weight:0.08 kg Payment:T/T, Western Union, Credit Card Goods_stock:15 Shipping Port:Xiamen, China Lead Time:1-3 Days Condition:Brand New And Original Warranty:1 Year Certificate:COO
The GE HE693PBM100 PROFIBUS Master Communication Module is a specialized industrial networking component designed to extend GE Series 90-30 PLC capabilities with PROFIBUS DP connectivity. It enables PLC controllers to communicate with decentralized field devices through a reliable and widely adopted industrial bus architecture.
By acting as the network master, the HE693PBM100 manages communication with multiple PROFIBUS slave devices, allowing centralized PLC control over remote I/O systems, drives, valves, and intelligent automation components. This makes it a valuable solution for distributed control systems that require efficient data exchange and flexible system expansion.
With proven compatibility, stable fieldbus performance, and support for large-scale device integration, the HE693PBM100 remains a practical choice for maintaining and upgrading established GE industrial automation networks.
Technical Specifications
Parameter
Details
Model
HE693PBM100
Product Type
PROFIBUS DP Master Communication Module
Series
GE Series 90-30
Communication Protocol
PROFIBUS DP
Operating Mode
Master Only
Maximum Slave Devices
Up to 64
Network Interface
PROFIBUS DP
PROFIBUS Connector
9-Pin D-Sub
Service Interface
RS-232 Serial Port
Supported Devices
Remote I/O, Drives, Valves, Measurement Devices
Maximum Baud Rate
Up to 12 Mbps
Installation Location
Series 90-30 Local Slot
CPU Requirement
CPU351 or Higher
Configuration Software
CIMPLICITY Control
Status Indicators
PWR / OK / RUN / PROFIBUS Status LEDs
Firmware Upgrade Interface
RS-232 Service Port
Mounting Type
PLC Rack Mounted
Dimensions
Approx. 130 × 35 × 127 mm
Weight
Approx. 0.30 kg
Recommended Companion Models
Model
Product Name
IC693CPU351
Series 90-30 CPU Controller Module
HE693PBS105
PROFIBUS DP Slave Communication Module
IC693PWR321S
Series 90-30 AC/DC Power Supply Module
IC693CHS391L
Series 90-30 10-Slot Baseplate Module
Frequently Selected Alternatives
Model
Product Name
HE693PBM101
PROFIBUS DP Master Communication Module
IC693CMM321-BA
Series 90-30 Ethernet Interface Communication Module
IC693CMM311
Series 90-30 Genius Communication Module
IC693BEM331
Series 90-30 Genius Bus Controller Module
Where It Excels in Industrial Use
• Designed for GE Series 90-30 PLC systems, the HE693PBM100 PROFIBUS DP Master Module provides reliable fieldbus communication between PLC controllers and distributed automation devices, enabling efficient data exchange across industrial networks.
• Suitable for factory automation, distributed I/O systems, process control equipment, drive networks, and machine automation applications where multiple remote devices require centralized PLC control.
• Ideal for connecting PROFIBUS DP slave devices including remote I/O stations, drives, valves, measurement transmitters, and other intelligent field devices through a high-speed serial communication network.
• Commonly applied in legacy GE Fanuc Series 90-30 installations where expanding communication capabilities and integrating decentralized field equipment are essential for system modernization.
Key Strengths at a Glance
• Functions as a PROFIBUS DP network master capable of controlling up to 64 slave devices, providing scalable communication capability for distributed automation systems.
• Supports high-speed PROFIBUS DP communication optimized for fast transmission of small data volumes between PLC systems and field devices.
• Provides direct integration with GE Series 90-30 PLC racks through a standard module slot, simplifying installation and reducing the need for additional communication hardware.
• Includes diagnostic functions and service interfaces that assist engineers with network commissioning, troubleshooting, and long-term maintenance.
Technical FAQs
1. What type of module is the GE HE693PBM100?
The GE HE693PBM100 is a PROFIBUS DP Master Communication Module designed for GE Series 90-30 PLC systems.
2. What communication protocol does the HE693PBM100 support?
The module supports PROFIBUS DP communication and is designed specifically for master operation on PROFIBUS networks.
3. How many slave devices can the HE693PBM100 control?
The module can control up to 64 PROFIBUS DP slave devices depending on network configuration and repeater usage.
4. What types of devices can connect to the HE693PBM100?
The module can communicate with distributed I/O modules, drives, valves, measurement transmitters, and other PROFIBUS DP-compatible field devices.
5. Can the HE693PBM100 operate as a PROFIBUS slave?
No. The HE693PBM100 is designed as a PROFIBUS DP master module and does not support PROFIBUS FMS or PA modes.
6. Which PLC platform is compatible with the HE693PBM100?
The module is designed for GE Series 90-30 PLC systems and requires compatible CPU firmware and configuration software support.
7. What connector type is used for PROFIBUS communication?
The module uses a 9-pin PROFIBUS DP connector for connection to network devices.
8. Does the HE693PBM100 provide diagnostic information?
Yes. The module provides status indicators and diagnostic features to assist with PROFIBUS network monitoring and troubleshooting.
9. What software is required to configure the HE693PBM100?
The module requires compatible GE PLC configuration software such as CIMPLICITY Control for hardware setup and network configuration.
10. What should be checked before replacing an HE693PBM100?
Engineers should verify CPU compatibility, firmware version, PROFIBUS configuration, slave device settings, and network wiring before replacement.
