Name: Ingersoll Rand 47588562001 / 54672530 Air Filter Maintenance Kit
Brand: Ingersoll Rand
SKU: 18294
Availability: InStock
Rating: 5.0 (1 reviews)

Introduction

The Ingersoll Rand 47588562001 / 54672530 Air Filter Maintenance Kit combines a scheduled service reference with a specific intake-air filtration component.

The primary maintenance reference, 47588562001, is cataloged as a 4,000-hour preventive maintenance kit. It belongs to the same Ingersoll Rand maintenance family as the 2,000-hour kit 47588561001 and the 8,000-hour kits 47588563001 and 47588564001.

The associated 54672530 is a clearly identified compressor air-filter element. Ingersoll Rand parts documentation describes it as “ELEMENT, AIR FILTER STD N55/75 – STANDARD AIR FILTER.” The N55K/N75K parts information places it directly within the standard air-filter assembly.

The filter's position in the intake system makes it an important protective component. Incoming ambient air can contain dust, fibers, abrasive particles, and other contaminants. By filtering the air before it enters the airend, 54672530 helps reduce contamination-related wear and supports consistent airflow through the compressor.

The standard-versus-high-dust distinction is particularly important. In the documented N55/N75 arrangement, 54672530 is the standard element, while 54672563 is the high-dust primary element and 54672597 is the high-dust secondary element. Therefore, a replacement should be selected according to the actual intake configuration rather than by dimensions alone.

Physical identification data for 54672530 gives an outside diameter of approximately 9.690 inches, a height of 14.370 inches, and an inside diameter of approximately 5.669 inches. These measurements are useful for checking the physical envelope, but they do not by themselves establish equipment compatibility.

The filter is also documented in applications beyond the original N55/N75 designation. Application records identify 54672530 for certain IRN75 and IRN100 VSD rotary screw compressors, including configurations marketed as IRN75H-CC and IRN100H-CC.

Maintenance frequency depends on operating conditions. One application-specific source recommends replacing the element at 4,000 hours or once per year at minimum, with more frequent service in dusty environments. Actual replacement timing should follow the compressor's applicable service documentation and operating conditions.

The filter should be inspected for excessive dust loading, damaged pleats, deformation, moisture contamination, or deterioration of the sealing surfaces. Any abnormal contamination pattern may also justify inspection of the intake housing and surrounding seals.

The two supplied references are treated as one product listing as requested. Public documentation independently verifies 47588562001 as the 4,000-hour maintenance-kit reference and 54672530 as the standard air-filter element. The available public records do not establish the complete bill of materials inside kit 47588562001, so the two numbers retain their respective technical identities.

Technical Specifications

Specification	Details
Brand	Ingersoll Rand
Primary Part Number	47588562001
Associated Part Number	54672530
Product Type	4,000-Hour Preventive Maintenance Kit / Standard Air-Filter Element
Maintenance Interval	4,000 hours
Filter Type	Standard Air Filter
Filter Position	Compressor Intake
Filter Design	Radial-Seal, Round
Documented Application	N55/N75 Standard Air-Filter Configuration
Additional Applications	Certain IRN75 / IRN100 VSD configurations
Outside Diameter	9.690 in / approx. 246.1 mm
Inside Diameter	5.669 in / approx. 144.0 mm
Filter Height	14.370 in / approx. 365.0 mm
Approx. Overall Filter Envelope	246.1 × 365.0 mm OD × H
Complete Kit Dimensions	Not reliably verified from available technical documentation
Filter Weight	Not reliably verified from authoritative documentation
Complete Kit Weight	Not reliably verified
Filter Media	Not reliably verified as an OEM specification
Filtration Efficiency	Not reliably verified as an OEM specification
Airflow Rating	Not reliably verified from available OEM documentation
Standard / High-Dust	Standard
OEM Status	Genuine/OEM reference
Compatibility	Model-, serial-number-, and configuration-dependent

The principal dimensional figures are supported by available filter documentation.

Recommended Companion Models

Model	Product Name
47588561001	Ingersoll Rand 2,000-Hour Preventive Maintenance Kit
47588563001	Ingersoll Rand 8,000-Hour Preventive Maintenance Kit, Water-Cooled
47588564001	Ingersoll Rand 8,000-Hour Preventive Maintenance Kit, Air-Cooled
42542761	Ingersoll Rand 4,000-Hour Service Kit, Standard Air Filter Ultra, N90–160SS

47588561001, 47588563001, and 47588564001 are part of the same scheduled-maintenance family as 47588562001. 42542761 is a separate 4,000-hour service-kit reference for a larger N90–160SS standard-air-filter application. These are companion maintenance references, not automatic replacements for 47588562001.

Frequently Selected Alternatives

Model	Product Name
54672563	Ingersoll Rand High-Dust Primary Air-Filter Element
54672597	Ingersoll Rand High-Dust Secondary Air-Filter Element
22130223	Ingersoll Rand Standard Air-Filter Element, N75–160
42542779	Ingersoll Rand 8,000-Hour Service Kit, Standard Air Filter, N90–160SS

Where It Excels in Industrial Use

4,000-Hour Preventive Maintenance: The supplied 47588562001 / 54672530 references are treated as one product listing. 47588562001 is documented as an Ingersoll Rand 4,000-hour preventive maintenance kit, while 54672530 is the associated standard air-filter element used in compatible compressor configurations.
Standard Intake-Air Filtration: 54672530 is identified as “ELEMENT, AIR FILTER STD N55/75 – STANDARD AIR FILTER.” It filters incoming air before it reaches the compressor airend, helping limit dust and abrasive contamination.
N55/N75 Compressor Applications: Ingersoll Rand parts documentation places 54672530 in the standard air-filter assembly for applicable N55/N75 equipment. The same reference is also documented for certain IRN75 and IRN100 VSD rotary screw compressors.
Continuous Industrial Operation: Maintaining the intake filter helps preserve adequate inlet airflow and reduces the contamination load entering the compression system, which is particularly important for compressors operating for long duty cycles.
Planned Service Management: The 47588562001 reference fits into Ingersoll Rand's scheduled-maintenance family, alongside 2,000-hour and 8,000-hour maintenance kits.

Key Strengths at a Glance

Defined 4,000-Hour Service Interval: 47588562001 is cataloged as a 4,000-hour preventive maintenance kit, making it suitable for structured preventive-maintenance programs.
Standard, Not High-Dust, Configuration: 54672530 is specifically identified as the standard N55/N75 air-filter element. High-dust primary and secondary elements use different part numbers.
Radial-Seal Design: Replacement documentation identifies 54672530 as a radial-seal, round air-filter element, an important feature for maintaining a controlled seal between the filter and intake housing.
Large Filtration Envelope: Published specifications give approximately 9.690 in OD, 14.370 in height, and 5.669 in ID, providing useful physical identification criteria.
Airend Contamination Protection: The filter is installed upstream of the airend, where it helps prevent abrasive particles from entering the compressor and contributing to internal wear.
OEM Identification: 54672530 is listed as a genuine Ingersoll Rand component by industrial-parts suppliers, and the compressor parts documentation directly assigns the reference to the standard air-filter assembly.

Technical FAQs

1. What is Ingersoll Rand 47588562001 / 54672530?

The supplied references are treated as one product listing. 47588562001 is a 4,000-hour preventive maintenance kit, while 54672530 is the specified standard air-filter element for compatible Ingersoll Rand compressor configurations.

2. What is the primary function of 54672530?

Its primary function is to filter incoming compressor air before it reaches the airend, reducing the amount of airborne particulate entering the compression system.

3. Is 54672530 a standard or high-dust filter?

It is the standard air-filter element. In the applicable N55/N75 documentation, the high-dust primary and secondary elements are identified separately as 54672563 and 54672597.

4. What type of sealing arrangement does 54672530 use?

Available filter documentation identifies it as a radial-seal, round air-filter element.

5. Which compressor models are associated with 54672530?

Parts documentation identifies 54672530 for N55/N75 standard-filter configurations. Other application records also associate it with IRN75 and IRN100 VSD rotary screw compressors, including certain IRN75H-CC and IRN100H-CC configurations.

6. What happens if the air filter becomes excessively restricted?

A heavily loaded filter can increase inlet restriction and reduce available airflow. This can negatively affect compressor operating efficiency and increase the burden on the intake system.

7. How often should 54672530 be replaced?

One application-specific supplier recommends replacement every 4,000 hours or at least annually, with more frequent replacement in dusty environments. The actual maintenance interval should follow the applicable Ingersoll Rand service documentation for the compressor.

8. Can 54672530 be replaced with a generic air filter of similar dimensions?

Not automatically. The replacement must also match the required sealing arrangement, filtration characteristics, airflow requirements, and compressor configuration.

9. What is the difference between 54672530 and 54672563?

54672530 is the standard air-filter element, whereas 54672563 is identified as a high-dust primary air-filter element. They should not be treated as interchangeable without confirming the equipment configuration.

10. What should be verified before installing 54672530?

Verify the compressor model and serial number, standard-versus-high-dust configuration, filter housing, radial-seal interface, and applicable parts manual before installation.

Look forward to your comments!Comment