Ingersoll Rand 47545140001 85561850 Air-Cooled Hose Maintenance Kit

Introduction

The Ingersoll Rand 47545140001 85561850 Air-Cooled Hose Maintenance Kit reference combines a broader compressor maintenance part number with an individual hose reference used in Ingersoll Rand equipment. 47545140001 is cataloged as an air-cooled hose maintenance kit for New Cobra 90–160 / M90–160 compressors, while 85561850 is separately identified as a 1.25 × 46.00 hydraulic hose assembly with female JIC 37-degree swivel straight ends.

Hose assemblies are important reliability components in industrial compressor systems. They must transport the applicable fluid while tolerating vibration, thermal cycling, pressure fluctuations, and repeated equipment movement. A hose that is mechanically sound but incorrectly sized or fitted can still create leakage or installation problems.

The 85561850 reference is particularly well defined in current parts data. Industrial Air Power lists it as an Ingersoll Rand hydraulic hose with a 1.25 × 46 specification, while Industrial Service Solutions gives the more complete description of a 1.25 × 46.00 hose with female JIC 37-degree swivel straight ends.

A published Ingersoll Rand assembly drawing provides additional context. In an integrated dryer assembly for 30–40 HP / 22–30 kW equipment, item 2 is 85561850, described as a hydraulic hose measuring 1.25 × 46 inches, installed with a specified reducer bushing and connector. This demonstrates that the part can form part of a defined equipment assembly rather than functioning as a generic replacement hose.

That documented application also highlights the importance of matching the complete assembly. Hose diameter alone is not sufficient for selection. Fitting type, fitting orientation, connection thread, overall length, routing, and service conditions all influence whether a hose is suitable.

The 47545140001 reference belongs to a different maintenance classification. The current spare-parts catalog lists it as an air-cooled hose maintenance kit for New Cobra 90–160 / M90–160 compressors. The available evidence therefore supports describing 47545140001 and 85561850 separately rather than assuming that the hose is universally supplied inside the maintenance kit.

This distinction is valuable for purchasing teams. A service-kit number may represent a defined maintenance package for a particular compressor configuration, while an individual hose number may belong to a specific assembly drawing or subsystem. Procurement records should preserve the complete machine identification and the individual component number.

Before replacing 85561850, the technician should compare the existing hose with the replacement reference and confirm the end fittings. The JIC 37-degree swivel configuration is an important part of the component identity and should not be replaced by a hose having a different connection arrangement merely because the nominal diameter appears similar.

Hose routing should also be checked during service. Excessive bending, twisting, unsupported spans, contact with sharp edges, or exposure to unsuitable temperatures can shorten service life. The replacement should follow the original routing and maintain appropriate clearance from adjacent components.

Inspection of the fittings is equally important. Leakage can originate from damaged threads, sealing surfaces, loose connections, contamination, or incorrect assembly rather than from the hose body itself. Replacing the hose without correcting the underlying connection problem may result in repeated leakage.

The Ingersoll Rand parts catalog contains numerous nearby 1.25-inch hose references with different lengths, including 85561744 at 30 inches, 85561751 at 32 inches, 85561769 at 34 inches, 85561777 at 36 inches, 85561819 at 42 inches, 85561868 at 48 inches, and 85561876 at 50 inches. This range makes exact part-number matching especially important.

The correct replacement also depends on the fluid being transported. 85561850 is documented as a hydraulic hose, so it should not be assumed to be appropriate for a compressed-air, lubricant, coolant, or other circuit without confirming the equipment application.

For scheduled maintenance, a useful inspection routine includes checking hose-cover condition, fittings, routing, support points, signs of abrasion, evidence of leakage, and any nearby heat or mechanical interference. Early replacement of visibly deteriorated hoses can help prevent unplanned downtime.

Exact internal contents of 47545140001, the detailed construction and pressure rating of 85561850, package dimensions, kit weight, and complete compressor coverage were not sufficiently verified from authoritative documentation. These values are therefore intentionally not estimated.

For industrial maintenance teams, 47545140001 is a useful air-cooled hose-service reference, while 85561850 provides a clearly defined hydraulic hose assembly for specified Ingersoll Rand equipment. Maintaining the exact part-number and connection configuration can improve procurement accuracy, simplify service planning, and reduce hose-related reliability risks.

Technical Specifications

The 1.25 × 46.00 hose specification and female JIC 37-degree swivel straight-end configuration are documented for 85561850 in current Ingersoll Rand parts listings.

Recommended Companion Models

These are related 1.25-inch Ingersoll Rand hose references from the same catalog family, with different specified lengths. They are companion references rather than automatic substitutes for 85561850.

Frequently Selected Alternatives