Introduction
The Ingersoll Rand 47545140001 85562544 Air-Cooled Hose Maintenance Kit reference combines a broader hose-service requirement with an individual hose component used on compatible compressor equipment. 47545140001 is identified as an air-cooled hose maintenance kit for New Cobra M90–160 equipment, while 85562544 is listed as a 1.50 × 44.0 hose in the same general compressor-parts environment.
Hose assemblies play an important role in industrial compressors because they provide flexible connections between components that may experience vibration, thermal movement, and continuous operating cycles. Even when a hose is not a major mechanical component, its condition can directly affect leakage control and equipment reliability.
The 85562544 reference has a clearly defined dimensional identity. Ingersoll Rand parts catalog data lists it as Hose D 1.50 X 44.0, while another current listing describes the component more fully as a hydraulic hose measuring 1.50 × 44.00 with female JIC 37-degree swivel straight fittings.
The specified fittings are an important part of the component's identity. A hose with the same nominal diameter and length but a different connection design, thread standard, swivel arrangement, or end orientation may not be suitable for the installation. For this reason, the complete part number should be used rather than selecting a replacement only by hose size.
Published Ingersoll Rand catalog data places 85562544 within a broad family of 1.50-inch hose references. Nearby numbers include 85562536 at 42.0 inches, 85562569 at 46.0 inches, 85562593 at 50.0 inches, 85562601 at 52.0 inches, 85562676 at 66.0 inches, and 85562692 at 70.0 inches. This range illustrates why an apparently minor difference in hose length can represent a distinct installation.
The 47545140001 maintenance reference is associated with the air-cooled hose service program for New Cobra M90–160 and M90–160 VSD equipment. Scheduled hose maintenance can be valuable because deterioration may develop gradually through vibration, temperature exposure, abrasion, fitting movement, or aging of the hose material.
During replacement, technicians should inspect the complete hose path rather than concentrating only on visible damage. Contact with hot surfaces, sharp edges, rotating components, or unsupported spans can create stress points that shorten the life of a replacement hose.
The end fittings should also be inspected. Leakage at a hose connection can be caused by damaged threads, worn sealing surfaces, incorrect tightening, contamination, or improper fitting alignment. Installing a new hose without addressing an underlying fitting problem may not resolve the issue.
Because 85562544 is identified as a hydraulic hose, service conditions should also be verified before installation. Fluid compatibility, operating temperature, pressure, pulsation, and bend requirements should be consistent with the original equipment application.
Available service data lists 85562544 together with other hose references in New Cobra M90–160 equipment. The same parts environment includes 85560431, 85561850, 85562460, 85562536, and other hose assemblies serving different sizes or configurations. These references should not be treated as interchangeable simply because they are physically similar.
For maintenance planners, retaining both the complete compressor identification and the individual hose number is a useful way to improve spare-parts traceability. This is particularly important for compressor families that use multiple hoses with closely related part numbers.
The relationship between 47545140001 and 85562544 should likewise be confirmed at the equipment level. The service data establishes that both references are associated with the New Cobra M90–160 hose-maintenance environment, but the precise contents of a packaged service kit should be checked against the current bill of materials rather than inferred from a general catalog.
A well-controlled hose replacement process can reduce the chance of leakage-related downtime. Verifying the part number, measuring the existing installation where appropriate, checking the fittings, following the original routing, and securing the replacement without excessive twisting or bending are all important maintenance practices.
For purchasing departments, the 85562544 reference offers a precise way to identify the required 1.50 × 44.00 hose assembly. This is more reliable than purchasing an unspecified hose based only on nominal diameter.
Exact hose construction, pressure rating, temperature rating, material composition, package dimensions, kit contents, and weight were not sufficiently verified from authoritative documentation. These specifications are therefore intentionally not estimated.
For industrial compressor operators and service professionals, 47545140001 and 85562544 provide a useful combination for hose-maintenance planning on compatible Ingersoll Rand equipment. Accurate component identification and careful installation can help maintain reliable fluid routing, limit leakage, and support predictable compressor operation.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Ingersoll Rand |
| Maintenance Kit Reference | 47545140001 |
| Component Reference | 85562544 |
| 47545140001 Product Type | Air-Cooled Hose Maintenance Kit |
| 85562544 Product Type | Hydraulic Hose |
| Hose Diameter | Approx. 1.50 in |
| Hose Length | Approx. 44.00 in |
| End-Fitting Configuration | Female JIC 37-degree swivel straight, per supplier specification |
| Primary Function | Flexible fluid routing |
| Documented Equipment Context | New Cobra M90–160 / M90–160 VSD service environment |
| Hose Construction | Verify current manufacturer specification |
| Working Pressure | Application-specific; verify current specification |
| Temperature Rating | Application-specific; verify current specification |
| Fluid Compatibility | Verify against the applicable hydraulic/fluid circuit |
| Bend Radius | Verify current manufacturer specification |
| Kit Contents | Verify configuration-specific bill of materials |
| Kit Dimensions | Application-specific; verify applicable documentation |
| Weight | Packaging-specific; verify supplied product |
| Installation | Follow applicable Ingersoll Rand service documentation |
| Compatibility | Confirm compressor model, serial number, assembly drawing, and fitting configuration |
The catalogued 1.50 × 44.0 dimensions and the more detailed female JIC 37-degree swivel straight-end description are supported by current Ingersoll Rand parts listings.
Recommended Companion Models
| Model | Product Name |
| 85562536 | Hose D 1.50 × 42.00 |
| 85562569 | Hose D 1.50 × 46.00 |
| 85562593 | Hose D 1.50 × 50.00 |
| 85562601 | Hose D 1.50 × 52.00 |
These are closely related Ingersoll Rand 1.50-inch hose references from the same catalog family. Their lengths differ from 85562544, so they should be treated as companion references rather than automatic replacements.
Frequently Selected Alternatives
| Model | Product Name |
| 85562460 | Hose D 1.50 × 30.00 |
| 85562510 | Hose D 1.50 × 38.00 |
| 85562676 | Hose D 1.50 × 66.00 |
| 85562692 | Hose D 1.50 × 70.00 |
