Introduction
The Ingersoll Rand 47548443001 85560431 Water-Cooled Hose Maintenance Kit provides a defined service reference for maintaining hose assemblies on compatible New Cobra M90–160 and M90–160 VSD compressors. The service-parts listing identifies 47548443001 as the water-cooled hose maintenance kit and specifically lists 85560431 as one of its hose components.
Hose assemblies are essential reliability components in industrial compressors. They connect major assemblies while accommodating vibration, thermal movement, and the continuous mechanical cycles associated with compressor operation. When a hose begins to deteriorate, the resulting leakage can affect system performance and create avoidable maintenance downtime.
The 85560431 reference has a clear catalog identity. Ingersoll Rand parts data lists it as Hose D 0.75 × 42.00, while another catalog describes it as Hose Hyd 0.75 × 42.00. This provides a precise identification point for procurement and service records.
The relationship with 47548443001 is particularly useful for maintenance planning. The published M90–160 VSD service information places 85560431 directly within the water-cooled hose maintenance package, alongside other hoses such as 85561850, 85562460, and 85562536. This means the two requested part numbers are not merely related by compressor family; they are documented as a kit-and-component pairing for the listed configuration.
During service, technicians should inspect the entire hose assembly rather than focusing only on the flexible section. Fittings, threads, sealing interfaces, brackets, clamps, and adjacent components can all contribute to leakage or premature wear. Correcting the underlying installation problem is often as important as replacing the hose itself.
Routing should receive particular attention. A replacement hose should follow the original path and maintain sufficient clearance from hot surfaces, moving parts, sharp edges, and other potential sources of abrasion. Excessive bending or twisting can introduce unnecessary stress into the hose and its fittings.
The 85560431 part number is also part of a broader Ingersoll Rand hose family. Published catalog data shows nearby 0.75-inch references such as 85560407 at 38.00 inches, 85560415 at 40.00 inches, 85560456 at 44.00 inches, and 85560597 at 72.00 inches. These similar references demonstrate why visual similarity or nominal diameter alone is not enough for replacement selection.
Fluid-service requirements should also be confirmed before installation. Although 85560431 is categorized as a hydraulic hose in parts listings, the equipment-specific drawing remains the appropriate source for confirming the actual circuit, service fluid, pressure conditions, and connection requirements.
A preventive maintenance approach can reduce the likelihood of hose-related failures. Inspection for surface cracking, hardening, blistering, abrasion, deformation, or fluid staining can reveal deterioration before a complete rupture or significant leakage occurs.
Connection integrity is equally important. A new hose will not necessarily resolve leakage caused by a damaged fitting, poor alignment, worn sealing surface, or incorrect installation. Maintenance personnel should therefore evaluate the complete connection assembly whenever 85560431 is replaced.
For purchasing departments, maintaining the exact relationship between 47548443001 and 85560431 improves procurement accuracy. The kit number identifies the broader water-cooled hose service requirement, while the individual hose reference identifies the specific component needed for replacement.
The available documentation confirms the kit relationship and the 0.75 × 42.00 hose specification, but detailed construction, reinforcement, pressure rating, temperature rating, exact fitting geometry, package dimensions, and weight were not sufficiently verified from authoritative sources. These values are therefore intentionally not estimated.
For industrial compressor operators and service professionals, the combination of 47548443001 and 85560431 offers a practical reference for planned water-cooled hose maintenance. Accurate part-number matching, careful routing, and complete inspection of the hose connections can help reduce leakage risk, improve maintenance efficiency, and support dependable compressor operation.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Ingersoll Rand |
| Maintenance Kit Reference | 47548443001 |
| Component Reference | 85560431 |
| 47548443001 Product Type | Water-Cooled Hose Maintenance Kit |
| 85560431 Product Type | Hydraulic Hose |
| Hose Diameter | Approx. 0.75 in |
| Hose Length | Approx. 42.00 in |
| Primary Function | Flexible fluid routing |
| Documented Application | New Cobra M90–160 / M90–160 VSD |
| Kit Quantity for 85560431 | 1 in the listed service configuration |
| Hose Construction | Verify current manufacturer specification |
| End-Fitting Configuration | Application-specific; verify current parts documentation |
| Working Pressure | Application-specific; verify applicable specification |
| Temperature Rating | Application-specific; verify applicable specification |
| Fluid Compatibility | Verify against the equipment-specific circuit |
| Bend Radius | Verify current manufacturer specification |
| Kit Contents | Verify current configuration-specific bill of materials |
| Kit Dimensions | Application-specific; verify applicable documentation |
| Weight | Packaging-specific; verify supplied product |
| Installation | Follow applicable Ingersoll Rand service documentation |
| Compatibility | Confirm compressor model, serial number, assembly drawing, and hose configuration before ordering |
The published service data directly associates 85560431 with 47548443001 and identifies the hose as 0.75 × 42.00 for the applicable New Cobra M90–160 / M90–160 VSD configuration.
Recommended Companion Models
| Model | Product Name |
| 85562536 | Hose D 1.50 × 42.00 |
| 85561850 | Hose D 1.25 × 46.00 |
| 85562460 | Hose D 1.50 × 30.00 |
| 39166806 | Sealant 510# |
These components are listed within the same water-cooled hose service environment for the New Cobra M90–160 / M90–160 VSD platform. They perform different functions and are not automatic substitutes for 85560431.
Frequently Selected Alternatives
| Model | Product Name |
| 85560407 | Hose D 0.75 × 38.00 |
| 85560415 | Hose D 0.75 × 40.00 |
| 85560456 | Hose D 0.75 × 44.00 |
| 85560597 | Hose D 0.75 × 72.00 |
