Ingersoll Rand 47548443001 85561850 Water-Cooled Hose Maintenance Kit

Introduction

The Ingersoll Rand 47548443001 85561850 Water-Cooled Hose Maintenance Kit provides a focused reference for hose service on compatible M90–160 compressor systems. 47548443001 belongs to the water-cooled hose maintenance family, while 85561850 is a defined hydraulic hose assembly with a 1.25 × 46.00 specification and female JIC 37-degree swivel straight ends.

Industrial rotary screw compressors depend on hose assemblies to maintain reliable connections between components exposed to vibration, thermal cycling, pressure changes, and continuous operation. A properly selected hose helps preserve fluid routing while allowing connected components to move within their intended mechanical limits.

The 85561850 reference is particularly clear in current parts listings. It is described as a hydraulic hose measuring 1.25 × 46.00, with female JIC 37-degree swivel straight ends. This complete description is important because Ingersoll Rand uses numerous hoses of similar diameter with different lengths and connection arrangements.

The 1.25-inch hose family includes several neighboring references, such as 85561744, 85561751, 85561769, 85561777, 85561819, 85561868, 85561876, and 85561918. Their specified lengths range from 30 to 58 inches, illustrating why an apparently similar hose is not necessarily a correct replacement.

For water-cooled compressor service, the hose system forms part of a broader maintenance program. Hose deterioration can result from continuous vibration, thermal exposure, abrasion, bending stress, chemical exposure, or age. Regular inspection gives maintenance teams an opportunity to identify damage before leakage develops into a more serious operational problem.

The fitting configuration of 85561850 is another important selection criterion. JIC 37-degree swivel connections are engineered around specific sealing and connection geometry. Replacing them with a visually similar hose using a different fitting standard can create leakage, assembly problems, or unsafe operating conditions.

During replacement, the complete installation should be inspected rather than only the flexible hose section. Fittings, threads, supports, clamps, brackets, and nearby surfaces can all contribute to premature failure. A damaged support or poorly positioned clamp may continue to damage a new hose even after replacement.

Routing should follow the original equipment arrangement as closely as practical. Excessive bending, twisting, unsupported spans, contact with sharp edges, or proximity to high-temperature components can reduce hose service life. Correct installation therefore requires attention to the full hose path, not just the connection points.

The relationship between 47548443001 and 85561850 is best understood as a maintenance-kit reference and an individual hose reference within the same water-cooled service environment. Available parts data places these references among M90–160-related hose and maintenance components, but the exact packaged quantity and contents should always be confirmed from the current equipment-specific bill of materials.

For purchasing departments, retaining the full part number is especially valuable because Ingersoll Rand's hose catalog includes many nearly identical 1.25-inch assemblies. The difference between 42, 46, 48, 50, or 58 inches, for example, can affect installation alignment and hose stress.

When replacing 85561850, the applicable service procedure should also be followed for connection preparation and tightening. The fitting should be aligned without forcing the hose into position, and the finished installation should remain free from unnecessary torsion or sharp bends.

Hose condition should be evaluated together with the surrounding equipment. Evidence of repeated leakage, abrasion, unusual flexing, or fitting movement may indicate a larger installation or support problem that should be corrected at the same time.

For maintenance planners, pairing the 47548443001 service reference with the individual 85561850 component reference improves service traceability and makes future procurement more consistent. It also helps distinguish the required hose from other 1.25-inch Ingersoll Rand references.

Exact hose construction, reinforcement, working-pressure rating, temperature limits, detailed materials, kit package dimensions, and kit weight were not sufficiently verified from authoritative documentation. These values are therefore intentionally not estimated.

For industrial compressor operators, 47548443001 and 85561850 provide a useful reference for planned hose maintenance on compatible water-cooled Ingersoll Rand equipment. Accurate part-number matching, correct fitting identification, and careful routing can help reduce leakage risk and support dependable long-term compressor operation.

Technical Specifications

The 1.25 × 46.00 specification and female JIC 37-degree swivel straight-end configuration are documented for 85561850 in current Ingersoll Rand parts listings.

Recommended Companion Models

These are closely related 1.25-inch Ingersoll Rand hose references from the same catalog family. Their different lengths mean they should be treated as companion references rather than automatic replacements for 85561850.

Frequently Selected Alternatives