Ingersoll Rand 47548443001 85562544 Water-Cooled Hose Maintenance Kit

Introduction

The Ingersoll Rand 47548443001 85562544 Water-Cooled Hose Maintenance Kit reference combines a dedicated compressor hose-maintenance package with an individual hydraulic hose reference. 47548443001 is listed as a water-cooled hose maintenance kit for New Cobra 90–160 / M90–160 equipment, while 85562544 is documented as a 1.50 × 44.00 hydraulic hose assembly.

Hose assemblies are important reliability components in industrial rotary screw compressors. They provide flexible connections between assemblies that may experience continuous vibration, thermal movement, pressure fluctuations, and normal mechanical movement. Correct hose selection therefore contributes directly to system integrity and maintenance reliability.

The 85562544 reference has a particularly clear technical identity. The part is specified as a 1.50 × 44.00 hydraulic hose, with an OEM-oriented listing further identifying female JIC 37-degree swivel straight fittings. This complete assembly description is more useful for procurement than a generic hose size because the fittings and overall length are integral to correct installation.

Ingersoll Rand uses many hoses with similar part numbers and closely related dimensions. Parts-catalog information lists 85562544 alongside other hose references such as 85562460, 85562536, 85562593, and 85560431. Such a large family of similar components makes exact part-number verification especially important.

The 47548443001 reference belongs to the New Cobra/M90–160 water-cooled hose-maintenance family. Scheduled hose service can help maintenance teams identify deterioration before a failed hose results in leakage, production interruption, or emergency repair work.

Hose deterioration may result from repeated flexing, vibration, high temperature, abrasion, chemical exposure, or aging. Visual indicators can include cracking, blistering, hardened areas, surface wear, deformation, or fluid staining. However, hose condition should also be evaluated according to the equipment's maintenance requirements rather than waiting for visible damage.

The fittings deserve equal attention during service. Leakage can originate at the connection rather than within the hose itself. Damaged threads, worn sealing surfaces, contamination, incorrect assembly, or misalignment can all create leakage paths. Replacing the hose without correcting an underlying connection problem may therefore provide only a temporary solution.

Routing is another critical factor. The replacement hose should follow the intended equipment path and maintain suitable clearance from hot surfaces, moving components, sharp edges, and other potential sources of damage. Excessive bending or twisting can introduce mechanical stress that reduces service life.

The female JIC 37-degree swivel straight-end arrangement documented for 85562544 should also be preserved during replacement. A hose with the same nominal diameter and length but a different fitting standard or end orientation is not necessarily suitable.

For maintenance planners, retaining the complete 47548443001 service reference together with 85562544 provides useful traceability between the broader maintenance operation and the individual hose component. Procurement records should also include the compressor model and serial number to reduce the risk of ordering a similar but incorrect hose.

The parts catalog shows numerous nearby 1.50-inch hose references, demonstrating that dimensional similarity alone does not establish interchangeability. This is particularly relevant when selecting aftermarket or replacement assemblies.

Before installation, technicians should verify hose routing, fitting condition, connection alignment, and the applicable service fluid. Because 85562544 is cataloged as a hydraulic hose, the equipment-specific documentation should remain the final reference for operating conditions and fluid compatibility.

A controlled replacement process can also improve long-term reliability. Inspecting support points and adjacent hardware while the hose is accessible may identify installation conditions that contributed to premature wear. Correcting these conditions at the same time can help extend the service life of the replacement assembly.

For purchasing departments, using the complete OEM reference is particularly valuable because Ingersoll Rand's catalog contains many hose assemblies with similar sizes and closely spaced part numbers. Exact part-number matching reduces the risk of incorrect length, fitting configuration, or application.

Exact hose construction, internal reinforcement, working-pressure rating, temperature rating, detailed materials, package dimensions, kit contents, and weight were not sufficiently verified from authoritative documentation. These values are therefore intentionally not estimated.

For industrial compressor operators and service professionals, 47548443001 and 85562544 provide a practical reference for planned water-cooled hose maintenance on compatible Ingersoll Rand equipment. Accurate part identification, correct fitting selection, and careful routing can help reduce leakage risk and support dependable compressor operation.

Technical Specifications

The published technical description for 85562544 specifies a 1.50 × 44.00 hydraulic hose and identifies female JIC 37-degree swivel straight fittings.

Recommended Companion Models

These are closely related 1.50-inch Ingersoll Rand hose references in the same broader parts family. Their different lengths mean they should be treated as companion references rather than automatic replacements for 85562544.

Frequently Selected Alternatives