Ingersoll Rand 47674733001 23424922 Preventive Maintenance Kit

Introduction

The Ingersoll Rand 47674733001 23424922 Preventive Maintenance Kit provides a defined reference for scheduled lubrication-system service on compatible R90–110 compressor equipment. 47674733001 is listed as a 2,000-hour preventive maintenance kit, while 23424922 is the associated coolant filter element in the published maintenance configuration.

The coolant filter is an important part of a rotary screw compressor's fluid-management system. Compressor lubricant must perform multiple functions, including lubrication and heat transfer, and controlling contamination helps maintain the intended operating condition of the fluid circuit.

The 23424922 component is specifically identified as an M42 coreless spin-on coolant filter in an Ingersoll Rand source-control drawing. The same drawing identifies the application as 90–160 kW equipment and gives an estimated element weight of 2.3 kg. This provides useful technical traceability for maintenance and purchasing teams.

The relationship between the two supplied references is clear in the R90–110 I service data. Under the 47674733001 maintenance package, one 23424922 coolant filter element is listed together with the 23429822 air-filter element, 23497001 pre-filter, and 39218193 motor grease. This shows that the coolant filter is one component of a broader preventive-maintenance program rather than an isolated spare.

During scheduled service, the filter should be replaced according to the applicable maintenance procedure rather than selected solely by physical similarity. Spin-on filters can have similar external dimensions while differing in thread, sealing arrangement, flow characteristics, or filtration specification.

Correct installation is equally important. The filter housing and sealing surface should be inspected and cleaned before installation, and the applicable procedure should be followed for gasket condition, tightening, and commissioning. Excessive tightening or improper seating can damage the sealing interface.

The 23424922 reference is also used in additional Ingersoll Rand compressor applications. Parts data associates it with R110 and R132-class machines and other configurations, reinforcing the importance of checking the exact machine identification before treating the filter as universally applicable.

Filter condition should be considered together with the overall lubrication circuit. Abnormal contamination, repeated filter restriction, or unexpected pressure behavior may indicate an underlying fluid-system problem rather than simply a normal filter-service condition.

For maintenance planners, 47674733001 provides a useful interval-based service reference. The package is specifically associated with a 2,000-hour maintenance event, while other R-Series configurations use different preventive-maintenance kit numbers. This makes exact kit identification important when preparing scheduled service orders.

For purchasing teams, the 23424922 reference is particularly valuable because supplier catalogs sometimes describe the same component using different terminology, such as oil filter or coolant filter. The Ingersoll Rand source-control drawing is more specific and identifies it as a coolant filter element.

The technical drawing also states that substitute items require written approval from Ingersoll Rand, underscoring the importance of controlled substitution for this component. This is especially relevant when evaluating aftermarket filter alternatives based only on approximate dimensions.

During replacement, technicians should also inspect the surrounding filter housing, threaded connection, sealing surface, and evidence of leakage. Any contamination or damage around the housing should be addressed before the new element is returned to service.

The wider preventive-maintenance program can include the intake-air filter, pre-filter, separator element, grease, and other consumables depending on the compressor configuration. These components perform different functions and should not be treated as interchangeable maintenance items.

Exact packaged dimensions and weight for 47674733001, complete contents for every kit revision, and all engineering specifications of the filter media were not sufficiently verified from authoritative documentation. These details are therefore intentionally not estimated.

For industrial compressor operators and service professionals, 47674733001 and 23424922 provide a clear reference for scheduled coolant-filtration maintenance. Correct component identification, controlled installation, and configuration-specific verification can help protect the lubrication system and support dependable compressor operation.

Technical Specifications

The Ingersoll Rand source-control drawing identifies 23424922 as an M42 coreless spin-on coolant filter for 90–160 kW equipment and gives an estimated weight of 2.3 kg.

Recommended Companion Models

These references are documented within the broader R90–110 preventive-maintenance program and address complementary service requirements. They are not direct substitutes for 23424922.

Frequently Selected Alternatives