Ingersoll Rand 47674732001 23429822 Preventive Maintenance Kit

Introduction

The Ingersoll Rand 47674732001 23429822 Preventive Maintenance Kit provides a defined reference for scheduled intake-air maintenance on compatible R90–110 compressor equipment. 47674732001 is listed as a 4,000-hour preventive maintenance kit, while 23429822 is the associated standard air-filter element in the published R90–110 I service configuration.

Clean intake air is fundamental to reliable rotary screw compressor operation. Ambient air can carry dust and other solid contaminants, and the intake filter provides the primary barrier against those particles entering the compressor's internal air path.

The 23429822 filter has a clear application identity. Current product data identifies it as an Ingersoll Rand standard air-filter element for R90–110 equipment, including R90 I/N and R110 I/N configurations as well as specified IE/NE variants.

The relationship between the two requested references is also well documented. The R90–110 I maintenance listing identifies 47674732001 as the 4,000-hour preventive-maintenance package and lists one 23429822 air-filter element together with a pre-filter, coolant filter, separator, and motor grease. This makes the filter an integral part of the scheduled service rather than an unrelated replacement component.

The 4,000-hour interval is distinct from the separate 2,000-hour preventive-maintenance reference 47674733001. Both kits are associated with the R90–110 I platform, but the service contents differ. Maintenance planners should therefore confirm the intended service interval before purchasing the package.

23429822 also has a substantial physical format. Published reference data specifies approximately 490 mm body height, 530 mm total height, 267 mm outer diameter, 175 mm inner diameter, and a net weight of approximately 2.36 kg. These dimensions are useful for product identification, but the compressor's current parts documentation should remain the final authority for fitment.

During replacement, filter-housing cleanliness is important. Dust, gasket residue, or other contamination on the sealing surfaces can create an unintended bypass path around the filter element. The housing should therefore be inspected and cleaned before the new element is installed.

The filter itself should also be checked for proper seating. A correctly sized element can still perform poorly if it is not positioned correctly within the housing or if the sealing interface is damaged.

Ambient operating conditions can influence filter loading. Installations exposed to dust, outdoor contamination, process particles, or other harsh intake conditions may require closer inspection than a clean compressor-room installation. The maintenance schedule should be considered together with actual filter condition and equipment guidance.

The published R90–110 data shows that 23429822 is shared across several variants, including I, IE, N, and NE configurations. This broad compatibility is useful for fleet maintenance, but serial-number verification remains important because equipment revisions can change component requirements.

For purchasing teams, retaining both the complete service-kit number and the individual filter number improves traceability. 47674732001 identifies the broader 4,000-hour maintenance event, while 23429822 identifies the specific intake filter required within the documented configuration.

Alternative filtration products may be available through cross-reference catalogs. For example, 23429822 is cross-referenced to several aftermarket filter numbers, but those catalogs explicitly recommend checking specifications and measurements for the intended application before substitution.

When evaluating a replacement, dimensional compatibility alone should not be considered sufficient. Filtration performance, sealing geometry, pressure-loss characteristics, housing compatibility, and service environment all contribute to proper operation.

The broader maintenance package also includes other components that serve different functions. The coolant filter, pre-filter, separator, and motor grease should not be confused with the 23429822 intake filter, and each should be selected according to the applicable maintenance schedule.

For industrial service teams, replacing the correct intake filter at the scheduled maintenance event can simplify preventive maintenance and improve consistency across an R90–110 compressor fleet. Accurate component identification also reduces the risk of installing a filter intended for a different compressor family.

Exact packaged dimensions, kit weight, complete contents for every 47674732001 revision, and detailed filter-media engineering characteristics were not sufficiently verified from authoritative documentation. These values are therefore intentionally not estimated.

For compressor operators and purchasing professionals, 47674732001 and 23429822 provide a clear reference for scheduled R90–110 intake-air service. Correct application matching, proper housing inspection, and accurate filter replacement can help maintain reliable filtration and support dependable compressor operation.

Technical Specifications

Published reference data gives 23429822 approximately 490 mm body height, 530 mm total height, 267 mm outer diameter, 175 mm inner diameter, and 2.36 kg net weight.

Recommended Companion Models

These references are documented within the R90–110 I preventive-maintenance program and address complementary intake, filtration, separation, or motor-lubrication functions. They are not substitutes for 23429822.

Frequently Selected Alternatives