Ingersoll Rand 47555211001 23497001 Air/Oil Separator Module

Where It Excels in Industrial Use

• Oil-injected screw compressor systems: 23497001 supports separation of lubricant from compressed air in compatible Ingersoll Rand compressor packages.
• High-utilization production: Well suited to industrial facilities where compressors run for extended periods and consistent oil-management performance is essential.
• Compressed-air quality protection: Helps control lubricant carryover before compressed air enters downstream piping and air-treatment equipment.
• Scheduled compressor servicing: Provides a practical separator replacement solution for planned maintenance and performance-focused service programs.

Key Strengths at a Glance

• Dedicated separator element: 23497001 is designed for compatible Ingersoll Rand air/oil separation applications.
• Effective lubricant recovery: Helps separate entrained oil from compressed air and return recovered lubricant to the compressor circuit.
• Oil carryover control: Supports cleaner compressed air and helps reduce unnecessary lubricant loss.
• Airflow efficiency: Maintaining an appropriately loaded separator helps manage pressure differential through the separation stage.
• Maintenance-focused replacement: Supports efficient scheduled servicing without requiring replacement of the complete separator vessel.

Technical FAQs

1. What is Ingersoll Rand 23497001?

Ingersoll Rand 23497001 is an air/oil separator element used in compatible oil-injected rotary screw compressor systems.

2. What is the relationship between 47555211001 and 23497001?

47555211001 identifies the applicable maintenance package, while 23497001 identifies the individual air/oil separator component.

3. What is the primary purpose of an air/oil separator?

It separates entrained lubricant from compressed air after the compression stage and supports the return of recovered oil to the compressor lubrication system.

4. Why is separator performance important?

Effective separation helps retain lubricant inside the compressor and limits oil carryover into the downstream compressed-air system.

5. What can increase oil carryover?

Separator deterioration, incorrect oil level, restricted oil-return lines, damaged seals, unsuitable lubricant, and abnormal operating conditions can contribute to excessive carryover.

6. How does separator restriction influence compressor operation?

As contamination accumulates, pressure differential across the separator can increase, potentially increasing energy consumption and reducing operating efficiency.

7. Can a deteriorated separator increase oil consumption?

Yes. Reduced separation efficiency can allow more lubricant to leave with compressed air, increasing compressor oil consumption.

8. What should be checked during separator replacement?

The separator vessel, sealing surfaces, gaskets, oil-return circuit, scavenge line, and related connections should be inspected for restriction, contamination, leakage, or damage.

9. Can a separator with similar dimensions replace 23497001?

Not automatically. Flow capacity, separation efficiency, pressure-drop characteristics, sealing configuration, materials, and equipment compatibility must also be matched.

10. What should be verified before installing 23497001?

Confirm the compressor model, serial number, separator-vessel configuration, existing separator part number, sealing arrangement, and applicable service procedure.