Ingersoll Rand 47704507001_B Oil Cooler

Where It Excels in Industrial Use

• The Ingersoll Rand 47704507001_B is an oil-cooling component identified for the standard Asia-Pacific water-cooled configuration of applicable RS185-260IE and RS200-250IE/NE compressor platforms.

• It supports thermal management of compressor oil by transferring heat from the oil circuit to the cooling medium, helping maintain appropriate operating temperatures during continuous-duty service.

• The cooler is well suited to industrial plants, manufacturing facilities, process operations, and compressed-air installations where stable oil temperature is essential for reliable compressor performance.

• Its water-cooled arrangement makes it particularly relevant to installations designed around a dedicated water-cooling circuit rather than an air-cooled oil-cooling arrangement.

• Correct cooler selection helps maintenance teams preserve the intended thermal balance of the compressor and avoid unnecessary changes to the original cooling-system configuration.

Key Strengths at a Glance

• Standard AP water-cooled oil cooler configuration.

• Designed for integration with the compressor's existing oil-cooling circuit.

• Supports effective heat transfer from compressor oil to cooling water.

• Suitable for continuous industrial compressor operation.

• Helps maintain oil temperature within the intended operating range.

• Provides a replacement reference for maintenance and cooler-service requirements on applicable installations.

Technical FAQs

1. What type of component is 47704507001_B?

The 47704507001_B reference identifies an oil cooler used in the applicable water-cooled compressor configuration.

2. What compressor platforms use this oil cooler reference?

The 47704507001 reference is listed as the Standard (AP) oil cooler for the RS185-260IE and RS200-250IE/NE parts platform, subject to the exact machine configuration.

3. What is the primary function of the oil cooler?

The oil cooler removes heat from the compressor oil circuit through heat exchange with the cooling-water circuit.

4. Why is oil temperature control important in a rotary screw compressor?

Maintaining suitable oil temperature supports lubrication, sealing, cooling, and reliable operation of the compression system.

5. Is 47704507001_B intended for air-cooled compressors?

No. This reference is associated with the water-cooled arrangement, so it should not be substituted into an air-cooled configuration without confirming engineering compatibility.

6. What should be checked before installing the cooler?

The technician should verify the compressor model and serial number, water-circuit connections, oil-circuit connections, mounting arrangement, seals, and applicable cooling-system documentation.

7. Can restricted water flow reduce oil-cooling performance?

Yes. Insufficient water flow, fouling, blockage, or excessive deposits can reduce heat-transfer capacity and cause the oil circuit to operate at elevated temperatures.

8. What should be inspected when replacing the oil cooler?

The associated oil and water connections, sealing surfaces, hoses or piping, mounting points, and cooling-water condition should be inspected before commissioning the replacement.

9. Is the 47704507001_B cooler interchangeable with 47704508001?

No. The two references serve different cooler functions; 47704507001 is identified as the oil cooler, while 47704508001 is identified as the after-cooler reference for the same standard AP water-cooled application.

10. How should compatibility of 47704507001_B be confirmed?

Compatibility should be verified against the compressor's complete model and serial information, cooling method, regional configuration, and current Ingersoll Rand parts documentation before installation.