Ingersoll Rand 47579001001 23153976 Air-Cooled Hose Maintenance Configuration

Where It Excels in Industrial Use

• The Ingersoll Rand 47579001001 23153976 configuration is intended for scheduled hose maintenance on compatible air-cooled compressor systems, combining the maintenance reference with the specified replacement hose.

• The 23153976 hose is identified as a 2.00 × 35.25 hose, providing a defined replacement specification for applications requiring the corresponding hose size and length.

• The configuration supports planned maintenance programs where replacement of service hoses helps maintain dependable connections and reduce the risk of leakage or deterioration in demanding operating environments.

• Proper hose selection is particularly important in compressor service because dimensional compatibility, routing, bend radius, and connection geometry all affect installation integrity.

• Exact applicability should be verified against the compressor model, serial number, existing hose arrangement, and applicable service documentation before installation.

Key Strengths at a Glance

• Air-Cooled Maintenance Application: 47579001001 provides the maintenance reference for the requested air-cooled hose service configuration.

• Specified Replacement Hose: 23153976 is the designated hose reference in this requested configuration, giving service personnel a clear replacement identification.

• 2.00-Inch Hose Size: The 23153976 reference is identified with a nominal 2.00-inch hose diameter and 35.25-inch length.

• Service Reliability: Replacing deteriorated hoses during planned maintenance can help address leakage, abrasion, vibration, and age-related degradation before these conditions affect equipment operation.

• Installation Control: Hose routing, connection alignment, clearance, and bend radius should be checked carefully to preserve the intended compressor installation.

Technical FAQs

1. What is the Ingersoll Rand 47579001001 23153976 configuration?
It is a combined air-cooled hose maintenance configuration consisting of the 47579001001 maintenance reference and the specified 23153976 replacement hose.

2. What is 47579001001 associated with?
47579001001 is identified as an air-cooled hose maintenance kit reference for compatible Ingersoll Rand compressor applications.

3. What are the basic specifications of 23153976?
23153976 is identified as a 2.00-inch nominal hose with a 35.25-inch length.

4. Can 23153976 be replaced by any 2.00-inch hose of the same length?
No, the replacement must also meet the required connection arrangement, pressure capability, temperature range, construction, routing, and application requirements.

5. How should compatibility be confirmed?
Compatibility should be checked using the compressor model and serial number together with the applicable parts documentation and the original hose installation.

6. What should be checked when removing the original hose?
Technicians should document the original routing and connection orientation while inspecting mating fittings, clamps, supports, and nearby components for damage or contamination.

7. Why is hose routing important after installation?
Correct routing helps prevent twisting, excessive bending, abrasion, vibration stress, and interference with adjacent or moving components.

8. What conditions can indicate hose deterioration?
Visible cracking, abrasion, blistering, deformation, leakage, fitting damage, or unusual movement during operation can indicate that a hose requires replacement or further inspection.

9. Does the requested configuration guarantee fitment across all air-cooled systems?
No, fitment remains dependent on the exact compressor configuration, model, serial number, and installed hose arrangement.

10. What should be done after installing the replacement hose?
The hose should be checked for correct routing and secure connections, followed by an appropriate system inspection for leakage or abnormal movement before returning the compressor to normal service.