Ingersoll Rand 47689371003 / 95021796 Airend O-Ring Module

Where It Fits in Industrial Applications

• Used for applicable Ingersoll Rand CDM134 OJ airend replacement and service applications.

• Supports major airend exchange work where the 47689371003 replacement kit is specified.

• Provides the associated 95021796 O-ring for compatible sealing applications.

• Suitable for planned compressor maintenance involving airend replacement and related sealing interfaces.

Key Strengths at a Glance

• 47689371003 is identified as an airend replacement kit for the CDM134 OJ configuration.

• 95021796 is identified as an Ingersoll Rand O-ring with SAE AS568 sizing.

• The O-ring is specified as 25.07 × 2.62 mm with FKM70 material.

• Combines the primary airend replacement configuration with a defined sealing component for coordinated service.

Technical FAQs

1. What is Ingersoll Rand 47689371003?

47689371003 is an Ingersoll Rand airend replacement kit identified for the CDM134 OJ configuration.

2. What is part 95021796?

95021796 is an Ingersoll Rand O-ring specified as 25.07 × 2.62 mm, SAE AS568, with FKM70 material.

3. Why are 47689371003 and 95021796 listed together?

For this product listing, the two supplied part numbers are treated as one coordinated service configuration combining the CDM134 OJ airend replacement kit with the specified O-ring.

4. What is the function of 95021796?

The 95021796 O-ring provides a sealing interface between compatible mating components in the applicable compressor assembly.

5. What material is used for 95021796?

95021796 is identified with FKM70 material, a fluorocarbon elastomer specification used for suitable sealing applications.

6. What are the listed dimensions of 95021796?

The listed O-ring dimensions are 25.07 mm inside diameter with a 2.62 mm cross-section.

7. What equipment is associated with 47689371003?

47689371003 is identified as a replacement airend kit for the CDM134 OJ configuration.

8. Should the O-ring be replaced when the airend assembly is serviced?

Replacement should follow the applicable service instructions. An O-ring should normally be replaced if it has been removed and shows wear, deformation, hardening, damage, or other deterioration.

9. Can another O-ring be substituted for 95021796?

Substitution should only be made when the replacement has been confirmed to match the required dimensions, material, sealing conditions, and equipment specification.

10. What should be verified before ordering this configuration?

Confirm the compressor model, serial number, CDM134 OJ configuration, both part numbers, O-ring specification, and applicable service documentation before installation.