Siemens 6AG4010-5AB30-0XX5 SIMATIC IPC3000 SMART V2 Industrial PC

Where It Excels in Industrial Use

• Industrial computing for machine control, production monitoring, and supervisory applications.
• Rack-mounted integration in control cabinets and industrial equipment enclosures.
• Data collection and process visualization using Ethernet and serial communications.
• Legacy automation environments that benefit from established PC interfaces such as VGA, DVI-D, USB, and PS/2.
• Applications requiring local processing and storage for operational data and industrial software.

Key Strengths at a Glance

• Intel Pentium Dual-Core G3260 processor operating at 3.3 GHz.
• 8 GB DDR3 SDRAM configuration, with reported support for expansion up to 16 GB.
• 1 TB SATA hard disk for local application and data storage.
• Dual Gigabit Ethernet connectivity for industrial networks and system integration.
• Front and rear USB ports for peripherals and service access.
• VGA and DVI-D display outputs for compatible monitors.
• Serial and PS/2 interfaces for connecting selected legacy equipment.
• IP20 protection for installation in a suitable industrial enclosure.

Technical FAQs

1. What is the Siemens 6AG4010-5AB30-0XX5?

The Siemens 6AG4010-5AB30-0XX5 is identified as a SIMATIC IPC3000 SMART V2 industrial PC designed for industrial computing, machine-related applications, and production system integration.

2. Which processor is associated with this model?

Available product listings identify an Intel Pentium Dual-Core G3260 processor with two cores, two threads, a 3.3 GHz clock speed, and 3 MB cache. Confirm the installed processor when purchasing used or reconfigured equipment.

3. How much memory does the IPC provide?

Listings for this article number report 8 GB of DDR3 SDRAM in a single 8 GB module. Memory upgrade compatibility and the maximum supported capacity should be confirmed against the installed hardware revision.

4. What storage is specified for this configuration?

The listed configuration includes a 1 TB SATA hard disk drive. Because storage may have been replaced during the product's service life, verify the drive capacity and condition on the actual unit.

5. Which network interfaces are available?

The reported configuration includes two Gigabit Ethernet ports, allowing connection to compatible industrial networks, supervisory systems, and other Ethernet-based equipment.

6. Does the IPC support serial communication?

Product listings describe serial interfaces, including configurable RS-232/RS-422/RS-485 capability. Confirm the precise port assignment and supported electrical modes for the individual unit before connecting serial equipment.

7. Which display connections are provided?

The listed configuration includes one VGA output and one DVI-D output. Check monitor compatibility and the required cable type before installation.

8. How many USB ports are available?

The reported layout includes four USB ports on the rear panel and two on the front panel. The exact USB specifications should be checked in the hardware documentation for the installed revision.

9. What are the installation dimensions and protection rating?

A product listing reports dimensions of approximately 430 × 177 × 463 mm and an IP20 protection rating. Verify the dimensions against the actual chassis before planning rack or cabinet installation.

10. What should be checked before commissioning?

Confirm the article number, power input, installed memory and storage, serial-port configuration, operating-system status, cooling condition, and available display and network interfaces. Ensure the enclosure and installation environment provide appropriate protection for industrial operation.