Introduction

The Foxboro RH916NA Cable is a model-specific industrial cable listed with a 10-meter length. In automation and process control environments, selecting the correct cable is an important part of maintaining equipment compatibility and ensuring that the installation matches its intended design.

The specified length provides a useful starting point for planning cable routing, equipment connections, and replacement work. However, cable length alone does not establish whether a product is suitable for a particular controller, base station, fieldbus interface, or termination assembly.

For maintenance engineers, system integrators, and industrial spare-parts buyers, accurate model identification helps simplify procurement and replacement planning. Before purchasing the RH916NA, verify its intended application and connector specifications against the existing installation to avoid selecting a cable with incompatible interfaces.

With its clearly identified model designation and stated shipping information, the product can be evaluated as part of an industrial spare-parts sourcing process, subject to confirmation of its technical details.

Technical Specifications

Parameter	Specification
Brand	Foxboro
Model Number	RH916NA
Product Type	Industrial Cable
Cable Length	10 meters
Shipping Weight	3.00 kg / 6.61 lb
Connector Type	Not confirmed
Electrical Characteristics	Not confirmed
Intended Application	Requires verification
System Compatibility	Requires verification
Product Dimensions	Not confirmed
Net Product Weight	Not confirmed

Technical Note: The supplied 3.00 kg figure represents shipping weight and may include packaging. The net product weight, dimensions, connector configuration, and precise application have not been confirmed. Verify these specifications before using the cable in an operational system.

Recommended Related Models

The following Foxboro cable models are documented options for specific termination cable applications. They may be useful when evaluating related cable requirements, but they are not confirmed direct replacements for the RH916NA.

Model	Product Type	Cable Length
Foxboro RH916DA	Type 1 P/PVC Termination Cable	0.5 m
Foxboro RH916DC	Type 1 P/PVC Termination Cable	3 m
Foxboro RH916DD	Type 1 P/PVC Termination Cable	5 m
Foxboro RH916DE	Type 1 P/PVC Termination Cable	10 m

These models have specific termination cable applications. Confirm the required cable type and system interface before selecting any alternative.

Popular Related Models

For buyers sourcing Foxboro termination cables, the following models offer additional length and material options for compatible installations.

Model	Product Type	Cable Length
Foxboro RH928AA	Type 1 LSZH Termination Cable	0.5 m
Foxboro RH928AD	Type 1 LSZH Termination Cable	3 m
Foxboro RH928AE	Type 1 LSZH Termination Cable	5 m
Foxboro RH928AF	Type 1 LSZH Termination Cable	10 m

P/PVC cables use a polyurethane outer jacket with semi-rigid PVC primary conductor insulation. LSZH versions use low-smoke, zero-halogen materials. Select the appropriate type based on the system requirements and installation environment.

The models listed above are related termination cables, not verified substitutes for the RH916NA. Confirm the exact part number and intended application before ordering.

Applications

The Foxboro RH916NA Cable is an industrial automation cable identified by its model number and specified 10-meter length. For process control installations, selecting the correct cable is essential for maintaining compatible connections between control equipment and associated components.

Before using this model, confirm its exact function and connector configuration against the installed Foxboro system. The model designation and cable length alone are not sufficient to establish its intended application.

Industrial Automation Maintenance: Supports replacement planning when the existing cable has been positively identified as RH916NA.
Control System Integration: Can be evaluated for compatible equipment connections after the required interfaces have been confirmed.
Equipment Installation: The specified 10-meter length provides a reference for planning cable routes between designated connection points.
Spare Parts Management: Offers a model number for inventory identification, quotation requests, and replacement-part inquiries.
Maintenance and Troubleshooting: Helps technicians identify the requested component when investigating connection problems or preparing scheduled maintenance.

Advantages

Extended Cable Reach

The specified 10-meter length provides flexibility for installations that require a longer cable route, subject to the actual application and interface requirements.

Convenient Part Identification

The RH916NA designation gives purchasing teams a specific model reference for managing spare parts and requesting replacement components.

Practical Maintenance Planning

Identifying the correct cable before maintenance begins helps technicians prepare the required parts and avoid unnecessary delays during servicing.

Flexible Installation Layout

A longer cable can provide additional routing options around industrial equipment. Proper installation should account for bend radius, strain relief, mechanical protection, and electromagnetic interference.

Procurement Efficiency

The model number, cable length, and supplied shipping weight provide basic information for purchasing and logistics planning. Confirming the complete specification before ordering helps reduce the risk of selecting an incompatible product.

Technical FAQs

Q1: What is the intended function of the Foxboro RH916NA Cable?

Its exact function should be confirmed against the relevant Foxboro equipment documentation. The model designation and length alone do not establish the cable's electrical or connection characteristics.

Q2: Is the RH916NA compatible with all Foxboro control systems?

No universal compatibility should be assumed. Compatibility depends on the intended application, connector interfaces, electrical characteristics, and control system configuration.

Q3: Can the RH916NA replace another cable with a similar appearance?

Not without verification. Similar-looking cables may have different pin assignments, connector configurations, or electrical specifications.

Q4: What information is required to verify compatibility?

Confirm the complete part number, the equipment models being connected, connector types, pin assignments, and the applicable technical documentation.

Q5: Can this cable be used for a control system expansion?

It may be suitable if the planned installation requires this specific cable and the equipment supports the intended connection. Verify the system architecture before installation.

Q6: Does the RH916NA support industrial communication protocols?

The supported protocol cannot be established from the supplied information. Check the cable's technical specification before using it for a communication connection.

Q7: Can the cable be connected while the equipment is energized?

Do not assume live connection or disconnection is supported. Follow the applicable equipment maintenance procedures and isolate the system when required.

Q8: What should be checked when a connection becomes unreliable?

Inspect the cable jacket, connectors, connection security, and routing. Review equipment diagnostics as well, since communication problems can originate from other components.

Q9: How should the cable be installed in an industrial environment?

Follow the applicable installation instructions for bend radius, strain relief, mechanical protection, temperature limits, and separation from potential sources of electrical interference.

Q10: What should buyers confirm before ordering the RH916NA?

Verify the manufacturer, exact model number, intended function, connector arrangement, system compatibility, cable length, and product condition before completing the purchase.

Look forward to your comments!Comment