Product Introduction

The Foxboro P0923DB Alarm Status Relay Output Cable is an industrial automation accessory intended for alarm-status relay output connection applications. In process control installations, correctly specified cables are essential for maintaining the intended interface between control hardware and associated monitoring or alarm circuits.

The supplied cable length of 1.2 meters provides a useful reference for installation planning where a short connection is required. Technicians should consider the actual routing path, connector accessibility, and equipment layout to avoid excessive tension or unnecessary bending.

For maintenance engineers, system integrators, and industrial spare-parts buyers, the most important consideration is confirming the cable's exact electrical and mechanical configuration. A cable intended for one relay output arrangement may not be suitable for another, even if the connectors appear similar.

When sourcing the P0923DB, verify the complete part number against the original equipment documentation. Confirming the supported hardware, pin assignment, and connection requirements before purchase helps reduce compatibility risks and supports reliable maintenance of the control system.

Technical Specifications

Parameter	Specification
Brand	Foxboro
Model	P0923DB
Product Type	Alarm Status Relay Output Cable
Cable Length	1.2 meters
Shipping Weight	3 kg / 6.61 lb
Connection Function	Alarm-status relay output; verify the exact interface
Connector Type	Confirm from the manufacturer's documentation
Pin Assignment	Verify using the applicable wiring diagram
Electrical Ratings	Confirm for the intended relay circuit
Compatible Equipment	Verify the supported Foxboro hardware
Primary Application	Relay output connection for compatible control-system equipment
Installation Requirements	Follow the manufacturer's wiring and safety procedures
Packaging Details	Confirm with the supplier

Note: The 3 kg figure is supplied as shipping weight and is not confirmed as the cable's net weight. Verify the actual product weight and package contents with the supplier if needed for logistics or technical records.

Recommended Related Models

The following Foxboro products may be worth reviewing when sourcing components for a broader industrial automation project. Their inclusion does not establish direct compatibility with the P0923DB cable.

Model	Product Type	Selection Consideration
P0923DB	Alarm Status Relay Output Cable	Main product for this listing
P0916FN	Terminal Cable	Verify connector configuration and intended system
P0924AH	Industrial Control Component	Confirm exact product identity and compatibility before sourcing
P0916AA	Industrial Control Component	Verify the complete catalog description and hardware requirements
P0916VB	Industrial Control Component	Check the official part documentation before considering it for the same system

Popular Related Models

When preparing a spare-parts list for Foxboro control equipment, buyers may also review the following items. Exact product functions and compatibility should be verified independently; these products should not be treated as direct substitutes for the P0923DB without supporting documentation.

Model	Product Type	Procurement Note
P0923DB	Alarm Status Relay Output Cable	Verify relay interface and connector details
P0916FN	Terminal Cable	Confirm the required cable configuration
P0924AH	Industrial Control Component	Verify the exact catalog designation
P0916AA	Industrial Control Component	Confirm the intended application
P0916VB	Industrial Control Component	Check hardware compatibility before ordering

For accurate procurement, specify the full model number P0923DB and confirm the intended relay output connection. Comparing the connector configuration and wiring requirements with the original installation helps ensure that the selected cable is appropriate for the application.

Applications

The Foxboro P0923DB Alarm Status Relay Output Cable is an industrial control accessory identified for alarm-status relay output applications. In process automation environments, relay output connections help interface control-system status signals with compatible monitoring, indication, or alarm-handling equipment.

With a specified cable length of 1.2 meters, the P0923DB can be considered for installations where a short connection is required between compatible control-system components. The precise connection points and supported equipment should be verified against the applicable Foxboro hardware documentation before installation.

Typical application scenarios include:

Alarm status connections: Supporting relay-output wiring in a compatible alarm-status configuration.
Process control systems: Connecting designated components within an approved Foxboro control-system installation.
Control cabinet wiring: Providing a defined cable length for organized routing between compatible devices.
Maintenance and replacement: Replacing an existing cable when the original part number has been confirmed.
Industrial spare-parts management: Keeping the specified cable available for planned service and equipment restoration.

Before use, confirm the connector arrangement, pin assignment, electrical ratings, and supported hardware. The product description alone does not establish the exact devices or terminals to which the P0923DB can be connected.

Key Advantages of the Foxboro P0923DB

Purpose-oriented relay output connection

The product designation identifies the cable with alarm-status relay output applications. Using the specified cable for its approved purpose helps maintain consistency with the control system's documented wiring arrangement.

Compact 1.2-meter length

The specified 1.2-meter cable length can suit short-distance connections in control cabinets or equipment assemblies. Proper measurement and routing help prevent connector strain and unnecessary cable loops.

Clear part-number identification

The complete model number, P0923DB, helps procurement and maintenance teams identify the required accessory. This is particularly important when a system contains several cables with similar appearances but different wiring configurations.

Supports maintenance and replacement workflows

Keeping the correct cable available can simplify repairs when an existing connection cable is damaged or missing. Confirming the original part number and connector details before ordering helps reduce the risk of receiving an unsuitable replacement.

Helps maintain organized control-system wiring

A correctly specified cable contributes to a clear cabinet layout and easier connection tracing. Accurate labeling and updated wiring documentation further support troubleshooting and routine maintenance.

Technical FAQs

1. What is the Foxboro P0923DB used for?

It is identified as an Alarm Status Relay Output Cable. Its exact interface, supported equipment, and intended connection points should be confirmed from the relevant Foxboro documentation.

2. What is the specified cable length?

The supplied product information specifies a length of 1.2 meters.

3. Which Foxboro systems support the P0923DB?

Compatibility must be verified against the exact control-system family and hardware configuration. Do not assume that the cable is compatible with every Foxboro or distributed control system.

4. What does “Alarm Status Relay Output” mean in the product description?

It indicates an association with relay output connections used for alarm-status functions. The specific signals, contact arrangement, and intended receiving equipment must be confirmed from the manufacturer's wiring documentation.

5. What connector types does the P0923DB use?

The connector types are not established by the supplied information. Check the original cable, product drawing, or official technical documentation before ordering.

6. Can this cable be replaced with a generic relay cable?

Only if the replacement is verified to match the connector arrangement, pin assignment, electrical characteristics, and intended application. Similar physical appearance does not guarantee compatibility.

7. What should be checked before installation?

Confirm the model number, connector orientation, pinout, supported hardware, and relay circuit requirements. Follow the approved installation procedure and applicable electrical safety rules.

8. What could cause an alarm-status relay signal to fail?

Possible causes include a damaged cable, loose connection, incorrect pin assignment, a faulty relay circuit, or a problem with the connected equipment. Follow the system's troubleshooting procedure to isolate the fault.

9. How should the cable be routed inside a control cabinet?

Follow the cabinet wiring design and manufacturer's guidance. Avoid sharp bends, excessive tension, abrasion, and routing that could expose the cable to mechanical damage or electrical interference.

10. How can buyers verify the correct replacement cable?

Use the complete part number P0923DB and compare the connector arrangement, terminal assignment, and intended application with the installed cable or approved bill of materials. Confirm compatibility before placing an order.

Look forward to your comments!Comment