Foxboro RH923DB Alarm Status Relay Output Cable

Applications

The Foxboro RH923DB Alarm Status Relay Output Cable is an industrial automation accessory identified for alarm-status relay output applications. In process control environments, dedicated connection cables help link compatible control-system components and support the transfer of status signals to designated monitoring or alarm circuits.

With a specified cable length of 1.2 meters, the RH923DB may be suitable for short-distance connections within a control cabinet or equipment assembly, provided the cable matches the system's hardware and wiring requirements.

Potential application areas include:

• Alarm status interfacing: Connecting designated relay output interfaces in a compatible control-system configuration.

• Process automation installations: Supporting approved connections between Foxboro components and associated equipment.

• Control cabinet wiring: Providing a defined cable length for compact equipment layouts.

• Maintenance and replacement: Replacing an existing cable when the original part number and connection requirements have been verified.

• Industrial spare-parts management: Maintaining a specified cable for planned maintenance and equipment restoration.

Before installation, verify the cable's connector types, pin assignments, electrical characteristics, and supported hardware. The product name alone does not establish its exact terminal connections or compatibility with a particular Foxboro system.

Key Advantages of the Foxboro RH923DB

Designed for a specific connection application

The product description associates the RH923DB with alarm-status relay output connections. Using the correct cable for its documented application helps maintain the intended wiring arrangement within an industrial control system.

Practical 1.2-meter cable length

The specified length can be useful for short connections where cable routing distance is limited. Installation planning should account for connector access, routing clearance, and strain relief.

Clear model identification

The full part number RH923DB helps buyers distinguish the required component from cables with similar descriptions. Accurate identification is especially important where different models have different wiring arrangements.

Useful for maintenance and replacement

Having the specified cable available can help maintenance teams respond to damaged or missing connections. Confirming the original model number and interface details before ordering reduces the likelihood of receiving an unsuitable replacement.

Supports organized control-system wiring

A correctly selected cable helps maintain a consistent equipment layout and makes connection tracing easier when combined with accurate labels and updated wiring diagrams.

Technical FAQs

1. What is the Foxboro RH923DB used for?

It is identified as an Alarm Status Relay Output Cable. Its precise function, interface design, and supported devices should be confirmed using the technical documentation for the exact model.

2. What is the specified cable length?

The supplied product information specifies a cable length of 1.2 meters.

3. Which Foxboro systems are compatible with the RH923DB?

Compatibility must be confirmed against the exact control-system family and hardware configuration. Do not assume that this cable works with every Foxboro controller or distributed control system.

4. What does alarm-status relay output refer to?

It describes a connection associated with relay output signals used for alarm or equipment-status functions. The specific signals and receiving interface must be verified from the applicable wiring documentation.

5. What connectors are fitted to the RH923DB?

The connector types are not specified in the supplied information. Check the original cable, product label, or manufacturer's drawings before purchasing a replacement.

6. Is the RH923DB interchangeable with the P0923DB?

Interchangeability cannot be established from the similar model numbers and product descriptions alone. Confirm both part numbers against the manufacturer's documentation, including their pin assignments, connector arrangements, and intended equipment.

7. Can a generic relay output cable be used as a substitute?

Only if the alternative is confirmed to match the required electrical characteristics, pinout, connectors, and intended application. Physical similarity alone is not sufficient.

8. What should be checked if an alarm-status signal does not appear?

Inspect the cable and connectors according to the approved maintenance procedure. Verify the wiring, terminal assignment, relay circuit, and connected equipment before concluding that the cable is defective.

9. How should the cable be installed in an industrial cabinet?

Follow the equipment manufacturer's wiring instructions. Avoid excessive tension, sharp bends, abrasion, and routing that could expose the cable to mechanical damage or electrical interference.

10. What information is needed to order the correct replacement?

Provide the complete model number RH923DB, the connected equipment model, and any available connector or nameplate information. Compare these details with the approved parts list before placing the order.