Brand:Siemens Item No.:6SN1161-1CA00-0BA0 Product Origin:Germany Product Dimensions:95 × 44 × 32 mm Product Weight:0.04 kg Payment:T/T, Western Union, Credit Card Goods_stock:15 Shipping Port:Xiamen, China Lead Time:1-3 Days Condition:Brand New And Original Warranty:1 Year Certificate:COO
The Siemens 6SN1161-1CA00-0BA0 Drive Bus Cable is a model-specific connectivity component for compatible industrial drive-system applications. In automated machinery, communication connections help coordinate the operation of drive equipment and other control-system components.
Selecting the correct cable is important because industrial communication interfaces may use different connector arrangements, electrical characteristics, and wiring requirements. A cable that looks similar to the original may not provide the correct connection for the intended Siemens equipment.
For maintenance engineers and industrial spare-parts buyers, checking the complete order number against the installed system is an essential first step. Buyers should also confirm connector condition, product identification, and the intended application before purchasing.
During installation, follow the applicable Siemens documentation for cable routing, connection procedures, and communication troubleshooting. Correct part identification and careful handling help maintain reliable connections and support efficient industrial equipment maintenance.
Technical Specifications
Parameter
Specification
Brand
Siemens
Model
6SN1161-1CA00-0BA0
Product Type
Drive Bus Cable
Product Category
Industrial Automation / Drive-System Connectivity
Dimensions
95 × 44 × 32 mm
Dimensions in Inches
3.74 × 1.73 × 1.26 in
Weight
0.04 kg (0.09 lb)
Interface
Verify the exact bus interface in Siemens documentation
Compatibility
Confirm against the intended drive-system configuration
Product Condition
Confirm new, used, or refurbished status with the supplier
Note: Dimensions and weight are based on the supplied product information. Cable length, connector type, pin assignment, and supported interfaces should be verified separately before ordering.
Recommended Related Models
The following Siemens drive-system components may be relevant when researching compatible equipment and connectivity parts. They are not necessarily direct substitutes for this cable.
Model
Product Type
Selection Consideration
Siemens 6SN1161-1CA00-0BA0
Drive Bus Cable
Verify interface and connector requirements
Siemens 6SN1161 Series
Drive-System Accessories
Confirm the exact product designation and compatibility
Siemens 6SN1145-1AA00-0AA0
Infeed Module
Check its role in the intended drive system
Siemens 6SN1124-1AB00-0CA2
Power Supply Module
Verify system configuration and electrical requirements
Popular Related Models
Industrial buyers sourcing Siemens drive-system components may also investigate these products when maintaining compatible installations:
Siemens 6SN1161-1CA00-0BA0 — Drive Bus Cable
Siemens 6SN1145-1AA00-0AA0 — Infeed Module
Siemens 6SN1145-1AA00-0CA0 — Infeed Module
Siemens 6SN1124-1AB00-0CA2 — Power Supply Module
Always verify the complete order number and the cable's connector and interface specifications before purchasing. Similar product designations do not guarantee compatibility, and the cable length and pin assignment should be confirmed for the intended installation.
Applications
The Siemens 6SN1161-1CA00-0BA0 Drive Bus Cable is an industrial automation connectivity component intended for use in compatible Siemens drive-system installations. Bus connections are essential for communication between drive components and the wider control architecture, helping equipment exchange the signals and information required for coordinated operation.
Typical application areas for compatible Siemens drive bus cables include:
CNC machine tools: Supporting communication infrastructure in machine-tool drive and control cabinets.
Factory automation: Maintaining bus connections in automated manufacturing equipment.
Drive-system maintenance: Replacing a damaged or missing cable with the correct model-specific component.
Legacy equipment support: Sourcing matching connectivity parts for existing Siemens installations.
The exact interface, cable configuration, and supported equipment for the 6SN1161-1CA00-0BA0 should be verified against the relevant Siemens documentation before installation.
Advantages
1. Model-Specific Connectivity
Using the correct Siemens cable part number helps ensure that the connection component matches the intended system configuration. Accurate identification is especially important when servicing established drive installations.
2. Support for Drive-System Communication
A correctly specified bus cable supports the intended communication connection between compatible system components. Cable type and interface requirements should always be checked before replacement.
3. Compact Component Format
The supplied dimensions indicate a compact component suitable for applications where cabinet space and connection layout matter. Confirm the actual connector arrangement and installation clearance before use.
4. Convenient Maintenance Replacement
Replacing a damaged or missing cable with the correct part can help restore the intended connection without unnecessary changes to the existing wiring arrangement.
5. Improved Spare-Parts Management
Recording the complete model number and application reference helps maintenance teams and purchasing departments identify the correct cable and avoid confusion with similar accessories.\
Technical FAQs
Q1: What is the Siemens 6SN1161-1CA00-0BA0 Drive Bus Cable used for?
It is identified as a Siemens drive bus cable for an industrial automation application. The exact communication interface and supported system components should be confirmed from the documentation for this part number.
Q2: Which Siemens drive systems support this cable?
Compatibility depends on the specific drive family, communication interface, and connected components. Consult the relevant Siemens manuals and cable specifications before ordering.
Q3: Can this cable be replaced with a generic bus cable?
Not without confirming electrical, mechanical, and communication compatibility. Connector type, pin assignment, cable characteristics, and system requirements must match the intended application.
Q4: What should be checked before installing the cable?
Verify the part number, connector condition, connection points, cable routing, and interface requirements. Follow the manufacturer's wiring instructions.
Q5: Can an incorrect bus cable cause communication problems?
Yes. An incompatible cable, incorrect pin assignment, damaged connector, or poor connection may interrupt communication or cause intermittent faults.
Q6: How can a bus communication fault be diagnosed?
Check system diagnostics, connector seating, cable condition, and the configuration of the connected devices. Use the manufacturer's troubleshooting procedure to isolate the cause.
Q7: Is the cable direction-sensitive?
That depends on its design and intended interface. Follow the connection markings and installation instructions rather than assuming that both ends are interchangeable.
Q8: What precautions should be taken when routing the cable?
Avoid excessive bending, crushing, tension, and abrasion. Maintain suitable separation from power cables where required by the system's electromagnetic compatibility guidelines.
Q9: Can a damaged connector be repaired?
Repair suitability depends on the cable construction and manufacturer guidance. For critical drive-system connections, replacing a damaged cable with a verified compatible part may be preferable to an improvised repair.
Q10: What information should be recorded when replacing the cable?
Record the complete part number, connected equipment, installation location, and any communication faults observed before and after replacement. This helps simplify future maintenance.
