Name: Siemens 6SN1161-1CA00-0CA1 Drive Bus Cable
Brand: Siemens
SKU: 23014
Availability: InStock
Rating: 5.0 (1 reviews)

Introduction

The Siemens 6SN1161-1CA00-0CA1 Drive Bus Cable is a model-specific connectivity component intended for compatible industrial drive-system applications. Reliable connections are important in automated machinery because communication between designated components supports coordinated equipment operation.

For maintenance engineers, system integrators, and industrial spare-parts buyers, verifying the complete order number is an essential step when sourcing this cable. Similar Siemens part numbers may have different connector arrangements or technical requirements, so compatibility should not be inferred from appearance alone.

When purchasing this model, confirm the product identification, condition, connector configuration, and intended application. For equipment that must remain operational, checking these details before ordering can help reduce procurement mistakes and avoid delays caused by unsuitable replacement parts.

During installation, follow the applicable Siemens instructions for connection, cable routing, and system diagnostics. Correct component selection and careful handling help maintain reliable connectivity within the intended drive system.

Technical Specifications

Parameter	Specification
Brand	Siemens
Model	6SN1161-1CA00-0CA1
Product Type	Drive Bus Cable
Product Category	Industrial Automation / Drive-System Connectivity
Dimensions	152 × 152 × 25 mm
Dimensions in Inches	5.98 × 5.98 × 0.98 in
Weight	0.1 kg (0.22 lb)
Communication Interface	Verify using the applicable Siemens documentation
Connector Configuration	Confirm before ordering
System Compatibility	Verify against the intended drive-system configuration
Product Condition	Confirm new, used, or refurbished status with the supplier

Note: Dimensions and weight are based on the supplied product information. Cable length, connector type, pin assignment, and interface specifications should be verified separately before installation.

Recommended Related Models

The following Siemens components may be relevant for drive-system spare-parts research. They should not be considered direct substitutes without technical verification.

Model	Product Type	Selection Consideration
Siemens 6SN1161-1CA00-0BA0	Drive Bus Cable	Verify connector and interface compatibility
Siemens 6SN1161-1CA00-0BA1	Drive Bus Cable	Compare model-specific connection requirements
Siemens 6SN1161-1CA00-0CA0	Drive Bus Cable	Confirm intended system application
Siemens 6SN1161-1CA00-0CA1	Drive Bus Cable	Verify exact specifications before replacement
Siemens 6SN1145-1AA00-0AA0	Infeed Module	Check its role in the intended drive configuration

Popular Related Models

Industrial buyers sourcing Siemens drive-system components may also investigate the following models:

Siemens 6SN1161-1CA00-0BA0 — Drive Bus Cable
Siemens 6SN1161-1CA00-0BA1 — Drive Bus Cable
Siemens 6SN1161-1CA00-0CA0 — Drive Bus Cable
Siemens 6SN1161-1CA00-0CA1 — Drive Bus Cable
Siemens 6SN1145-1AA00-0AA0 — Infeed Module

Before ordering, verify the complete order number, connector arrangement, and interface requirements against the applicable Siemens documentation. Similar model numbers do not guarantee interchangeability or equivalent functionality.

Applications

The Siemens 6SN1161-1CA00-0CA1 Drive Bus Cable is an industrial connectivity component identified by its Siemens order number. In compatible drive-system installations, bus cables provide connections between designated components, supporting communication and coordinated operation within industrial automation equipment.

Potential application environments for compatible Siemens drive-system cables include:

CNC Machine Tools: Supporting communication connections in compatible machine-tool drive and control systems.
Industrial Automation Systems: Connecting designated components within established Siemens drive installations.
Automated Manufacturing Lines: Supporting maintenance of connectivity components in production machinery.
Drive-System Maintenance: Replacing damaged or missing cables with correctly identified components.
Legacy Equipment Support: Helping maintenance teams source model-specific parts for existing Siemens installations.

Before installation, verify the cable's exact interface, connector configuration, and supported equipment using the relevant Siemens documentation.

Advantages

1. Precise Part Number Identification

The complete model number, 6SN1161-1CA00-0CA1, provides a specific reference for industrial spare-parts procurement. Accurate identification helps reduce confusion between similar cable models.

2. Drive-System Connectivity Support

A correctly specified bus cable supports the intended connection between compatible drive-system components. Connector compatibility and wiring requirements should be confirmed before installation.

3. Compact Component Design

The supplied dimensions provide a useful reference for inventory records and installation planning. Actual connector clearance and routing requirements should be checked against the equipment.

4. Convenient Replacement

A verified replacement cable can help restore the original connection arrangement without unnecessary changes to the existing drive-system configuration.

5. Improved Spare-Parts Management

Recording the complete order number and intended application helps purchasing teams identify the correct component and manage industrial maintenance inventory more efficiently.

Technical FAQs

Q1: What is the Siemens 6SN1161-1CA00-0CA1 Drive Bus Cable used for?

It is identified as a Siemens drive bus cable for an industrial automation application. Its precise communication function and compatible equipment should be confirmed using documentation for this exact part number.

Q2: How can I verify compatibility with my Siemens drive system?

Check the full order number, communication interface, connector type, pin assignment, and connected equipment against the system documentation.

Q3: Is the 6SN1161-1CA00-0CA1 interchangeable with other 6SN1161 cables?

Interchangeability should not be assumed. Models within the same series may differ in connection configuration or technical characteristics. Verify approved replacements before ordering.

Q4: Can a generic industrial cable be used as a replacement?

Only if its electrical characteristics, connector arrangement, pin assignment, and communication requirements meet the manufacturer's specifications. Physical similarity alone is insufficient.

Q5: What can cause communication errors after cable replacement?

Possible causes include an incompatible cable, loose connectors, damaged contacts, incorrect wiring, or faults in connected devices. Check diagnostic messages and follow the manufacturer's troubleshooting procedure.

Q6: What should I inspect on the cable connectors?

Check for bent contacts, contamination, damaged housings, and poor connector seating. Ensure that each connection is correctly aligned and secured according to the installation instructions.

Q7: Can cable routing affect communication reliability?

Yes. Excessive bending, crushing, tension, and unsuitable routing near sources of electrical interference can affect reliability. Follow the applicable cable-routing and electromagnetic compatibility requirements.

Q8: Should the equipment be powered down before replacing the cable?

Follow the equipment-specific service instructions. Apply appropriate lockout/tagout procedures and isolate power where required before handling the connection.

Q9: How can an intermittent bus connection be diagnosed?

Inspect the cable and connectors, review diagnostic logs, and perform approved continuity or interface checks where applicable. Follow the manufacturer's troubleshooting procedure.

Q10: What information should be recorded after replacement?

Record the complete part number, connected equipment, installation location, replacement date, and diagnostic results. These details support future maintenance and fault analysis.

Look forward to your comments!Comment