The GE IS215PMVPH1A is a high-reliability protection and I/O processing board module designed for use within the GE Mark VIe turbine control platform. As a key industrial control component, it combines advanced input/output handling with protection-oriented signal processing to support safe and efficient turbine operation. This module is engineered to meet the stringent demands of mission-critical environments where rapid response, accurate data acquisition, and system resilience directly affect performance and uptime.
Whether integrating protection logic with process signals or serving as a primary interface between sensors, actuators, and the Mark VIe core controller, the IS215PMVPH1A is built to deliver dependable performance under continuous industrial duty cycles.
Technical Specifications
| Specification | Details |
|---|---|
| Model | IS215PMVPH1A |
| Module Type | Protection & I/O Processing Board Module |
| Target Platform | GE Mark VIe Turbine Control System |
| Primary Function | Protection logic support and I/O signal acquisition |
| Processor / Logic | High-speed internal logic (proven industrial architecture) |
| I/O Channels | Supports multiple analog & digital I/O paths |
| Communication Interfaces | PROFIBUS-DP, Genius Bus, Ethernet TCP/IP compatible with Mark VIe networks |
| Power Input | 24 V DC ±10% (typical) |
| Environmental Rating | Industrial duty with vibration resistance |
| Operational Temperature | -40°C to +70°C |
| Mounting | Rack-mounted printable circuit board |
| Dimensions (L × W × H) | Approx. 210 mm × 160 mm × 32 mm |
| Weight | Approx. 0.72 kg |
| Certifications | SIL 2 compliant safety logic (industry standard) |
| Scan and Processing | Deterministic performance with <10 ms scan times at thousands of I/O points |
| Memory | Integrated memory buffers for runtime and diagnostics |
| Redundancy Capability | Compatible with redundant control architectures |
Note: Specifications may vary slightly by revision and rack configuration; refer to system documentation for exact details.
Recommended Companion Modules
For a balanced and resilient turbine control configuration, the following modules are often used alongside the IS215PMVPH1A:
-
GE IS210CPUIH1A – Core processing & control logic board
-
GE IS210SCMMH1C – System communication management module
-
GE IS200VVIBH1C – Vibration monitoring & protection board
-
GE IS200VTURH1B – Turbine sequencing & protection logic board
-
GE IS200VRTDH1D – Control coordination board
These modules complement the IS215PMVPH1A by providing enhanced processing, communication, and protection capabilities across the control rack.
Popular GE Mark VIe Modules
Across industrial and utility power generation environments, the following modules are widely deployed due to reliability and broad functionality:
-
GE IS200DSPXH1D – Digital signal processing board
-
GE IS200VTCCH1C – Communication coordination module
-
GE IS200VSVOH1B – Servo control board
-
GE IS200VCRCH1B – Control register board
-
GE IS200TBAIH1C – Analog input board
Each works in concert with modules like the IS215PMVPH1A to deliver complete control rack coverage.
