Bently Nevada 330102-00-18-90-02-00 3300 XL 8 mm Proximity Probe

Applications

The Bently Nevada 330102-00-18-90-02-00 3300 XL 8 mm Proximity Probe is designed for precise condition monitoring in large-scale industrial installations where long cable routing is required. With a 9-meter cable, it is perfect for machinery located in difficult-to-access areas while maintaining reliable signal integrity. Typical applications include:

• Steam and gas turbines in power generation plants
• Large centrifugal compressors in petrochemical facilities
• Industrial pump systems with extended sensor distance requirements
• Electric motors and generator shafts in power stations
• Gear-driven machinery in heavy industrial plants
• Continuous machinery condition monitoring for critical assets

This probe excels in installations requiring both precision measurement and extended reach.

Advantages

• Long 9-meter cable provides maximum installation flexibility
• High-precision eddy-current non-contact sensing for accurate vibration and displacement measurement
• Rugged stainless-steel construction suitable for demanding industrial environments
• ClickLoc miniature coaxial connector ensures secure and repeatable connections
• Fully compatible with Bently Nevada 3300 XL Proximitor systems
• Stable performance under vibration, temperature fluctuations, and electrical noise
• Supports predictive maintenance programs and early fault detection strategies
• Reliable operation for continuous 24/7 machinery condition monitoring 

Technical FAQs

1. What measurement principle does this probe use?
   It uses eddy-current non-contact sensing to measure shaft vibration and displacement.
2. Is it suitable for large machinery with long cable runs?
   Yes, the 9-meter cable ensures stable signal transmission over extended distances.
3. Which systems is it compatible with?
   Compatible with Bently Nevada 3300 XL Proximitor sensor modules.
4. What connector type is provided?
   Miniature coaxial ClickLoc connector for secure installation.
5. Can it operate in harsh industrial environments?
   Yes, designed for high vibration, temperature extremes, and mechanical stress.
6. What type of target surface is recommended?
   Conductive metallic surfaces such as steel shafts.
7. Does it require physical contact with the shaft?
   No, it operates with non-contact eddy-current technology.
8. Is factory calibration required?
   Factory-calibrated; system-level verification is generally sufficient.
9. Can it measure both radial vibration and shaft displacement?
   Yes, when integrated with 3300 XL systems.
10. What ensures long-term measurement stability?
    Industrial-grade construction and stable eddy-current sensing maintain consistent performance over time.