Epro PR6426/000-030+CON21/916-200 32 mm Eddy Current Sensor

Applications

• Turbomachinery monitoring systems in power plants for radial and axial shaft displacement measurement.

• Large compressor and pump condition monitoring in oil & gas and petrochemical industries.

• Industrial gas and steam turbine protection systems requiring high-range vibration sensing.

• Heavy-duty rotating machinery diagnostics for imbalance, misalignment, and bearing fault detection.

• Predictive maintenance systems used in critical asset management and condition-based monitoring.

• High-vibration industrial environments where long-term signal stability is required.

Key Advantages

• 32 mm probe design provides extended measurement range suitable for large shaft diameter applications.

• High-sensitivity eddy current technology enables accurate non-contact displacement and vibration detection.

• Integrated CON21/916-200 signal conditioning ensures stable and noise-resistant output signal conversion.

• Excellent thermal and mechanical durability for operation in harsh industrial environments.

• High linearity and repeatability ensure reliable long-term monitoring performance.

• Designed for continuous 24/7 operation in mission-critical machinery protection systems.

Technical FAQs

Q1: What is the main function of the PR6426/000-030 + CON21/916-200 system?
It measures shaft vibration, displacement, and position in large rotating machinery.

Q2: What does the CON21/916-200 module do?
It converts raw eddy current probe signals into a stable industrial output signal.

Q3: Is this system suitable for large turbines?
Yes, it is widely used in steam, gas, and hydro turbine monitoring systems.

Q4: What shaft size is recommended?
It is typically used for very large shafts (generally ≥200 mm diameter).

Q5: Does it support both static and dynamic measurement?
Yes, it measures both static displacement and dynamic vibration.

Q6: What is the typical measurement range?
It supports up to ±4.0 mm static range depending on configuration.

Q7: Can it operate in high-temperature environments?
Yes, it is designed for harsh conditions up to around 180–200°C (system dependent).

Q8: Is it suitable for continuous monitoring systems?
Yes, it is designed for 24/7 industrial condition monitoring.

Q9: Does it require frequent calibration?
No, it is designed for long-term stability with minimal recalibration.

Q10: What industries commonly use this system?
Power generation, oil & gas, petrochemical, and heavy industry.