Ingersoll Rand 47553880001 / 23467244 Intake Valve Service Kit

Introduction

The Ingersoll Rand 47553880001 / 23467244 Intake Valve Service Kit listing combines two independently documented service references associated with compressor air-inlet and control functions.

47553880001 is listed as an Intake Valve Service Kit 8K for the R90–160, IR90–160, and IE R90–160 compressor family. It appears alongside other R90–160 service references covering gearboxes, hoses, temperature-control valves, and preventive maintenance.

The second reference, 23467244, has a different but related technical role. Ingersoll Rand parts documentation identifies it as “KIT, SERVICE SOLENOID VVF18ENO(BD) & PVVF18ENO (MOD)”. A separate R132/R160 parts book similarly lists it as a service solenoid kit for the VVF18ENO and PVVF18ENO configurations.

The intake valve is an important component in a rotary screw compressor because it controls the flow of atmospheric air into the compression system. Its position is influenced by the compressor control strategy and can change as demand, pressure, and operating state change.

Reliable intake-valve movement is therefore important for stable compressor loading and unloading. If the valve fails to move correctly, the compressor may show abnormal pressure behavior, inefficient operation, or poor response to load changes.

The pneumatic or electrical control system is equally important. Solenoid valves can direct control signals to actuators, allowing the compressor controller to change valve position. A failed solenoid can therefore produce symptoms that appear to be mechanical intake-valve problems.

This is why 23467244 is technically relevant to compressor valve service even though it is not itself identified as the complete 47553880001 intake-valve kit. Its documented function is specifically associated with VVF18ENO/PVVF18ENO solenoid service.

During maintenance, technicians should inspect the intake valve, actuator, solenoid, control tubing, fittings, and associated sealing components as an interconnected system. Mechanical movement should be checked alongside control-signal response.

If a compressor has an intake-valve fault, replacing the valve-service components alone may not correct the problem if the actual cause is a defective solenoid, restricted control line, inadequate pneumatic pressure, sensor issue, or controller fault.

The R90–160 parts family contains multiple closely related service references. For example, 47553881001 is another 8K intake-valve service kit, while 47552954001 is a temperature-control valve maintenance kit. These should not be assumed interchangeable with 47553880001 simply because they belong to the same compressor family.

Likewise, 23467244 has a specific documented application. The available parts documentation associates it with VVF18ENO/PVVF18ENO configurations rather than establishing universal compatibility across all Ingersoll Rand intake-valve systems.

Exact contents of 47553880001 were not fully verified from the available public documentation. Although third-party descriptions indicate that the kit is intended for intake-valve servicing, individual seals, cylinder components, regulator modules, or solenoid components should not be presented as confirmed contents unless supported by the applicable parts list.

The same applies to 23467244: its service-solenoid function is documented, but complete kit dimensions, component count, and internal construction were not reliably established.

The supplied pair is treated as one product listing as requested. Public records independently establish 47553880001 as the 8K intake-valve service kit and 23467244 as the VVF18ENO/PVVF18ENO service-solenoid kit. The available documentation does not independently establish that 23467244 is the complete bill of materials contained in 47553880001.

Technical Specifications

The intake-valve application and 8K classification are supported by the R90–160 parts catalog, while the 23467244 solenoid application is documented separately in Ingersoll Rand service-parts information. Exact dimensional, electrical, pressure, and weight specifications were not reliably verified and are therefore not fabricated.

Recommended Companion Models

These references are documented within the same R90–160 maintenance-parts family and address intake-valve, gearbox, or hose service. They are companion maintenance items rather than automatic substitutes for 47553880001.

Frequently Selected Alternatives