Introduction
The Ingersoll Rand 47555464001 / 47554338001 Water Cooler Seal Maintenance Kit listing combines a dedicated water-cooler seal maintenance reference with an independently documented sealing-gasket reference.
47555464001 is cataloged as a Water Cooler Seal Maintenance Kit R90–160, with the listing extending the application to R90–160, IR90–160, and IE R90–160 configurations. It appears within the same Ingersoll Rand spare-parts group as other R90–160 maintenance products, including water-cooled hose kits, air-cooled hose kits, gearbox kits, intake-valve kits, and preventive-maintenance kits.
Water-cooled compressors depend on effective heat transfer to maintain appropriate operating temperatures. The water cooler forms part of this thermal-management system, and its sealing interfaces must remain reliable throughout repeated temperature and pressure cycles.
Sealing components are exposed to mechanical compression, temperature variation, fluid contact, and repeated maintenance cycles. Over time, a gasket or seal can lose elasticity, become compressed, harden, deform, or develop surface damage.
When a water cooler is opened for service, replacing the relevant sealing components is an important part of restoring the assembly. Reusing an old gasket after disassembly can increase the risk of leakage if the component has already taken a permanent compression set.
The associated reference 47554338001 is independently listed as a sealing gasket in Ingersoll Rand spare-parts listings. This supports its classification as a sealing component rather than a complete cooler assembly.
The relationship between the two supplied numbers should nevertheless be understood carefully. Publicly available documentation establishes their respective descriptions, but it does not provide a complete OEM bill of materials proving that 47554338001 constitutes the entire contents of 47555464001.
During water-cooler service, the technician should inspect the sealing surfaces before installing replacement seals. Dirt, corrosion, scratches, scale, or distortion on mating surfaces can compromise a new gasket even when the replacement part itself is correct.
Fastener condition and tightening procedure are also important. Uneven compression can create localized leakage paths, while excessive tightening can distort a cooler or damage a gasket.
The cooling-water circuit should be checked for leakage after reassembly. Where applicable, the system should also be checked for proper flow and operating temperature after returning the compressor to service.
47555464001 should not be confused with nearby R90–160 maintenance references. For example, 47555465001 is separately listed as an 8,000-hour water-cooled preventive maintenance kit for R90–110I, while 47555464001 is the water-cooler seal maintenance kit covering the broader R90–160 family.
Other related references include dedicated water-cooled hose maintenance kits such as 47553890001 through 47553893001. These address hose maintenance rather than the cooler's sealing interfaces and therefore should not automatically be substituted for 47555464001.
The exact seal material, cross-sectional dimensions, cooler-core configuration, and complete kit contents were not reliably verified from the available public documentation. These specifications should be confirmed against the compressor's parts list and serial-number information before ordering.
The supplied pair is treated as one product listing as requested. Public records independently establish 47555464001 as the R90–160 water cooler seal maintenance kit and 47554338001 as a sealing gasket reference.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Ingersoll Rand |
| Primary Part Number | 47555464001 |
| Associated Part Number | 47554338001 |
| Product Type | Water Cooler Seal Maintenance Kit / Sealing Gasket |
| Primary Service Reference | Water Cooler Seal Maintenance Kit |
| Secondary Reference | Sealing Gasket |
| Documented Application for 47555464001 | R90–160, IR90–160, IE R90–160 |
| Primary Function | Water-Cooler Sealing Maintenance |
| Cooling Arrangement | Water-cooled compressor configuration |
| Seal Material | Not reliably verified |
| Gasket Material | Not reliably verified |
| Gasket Thickness | Not reliably verified |
| Gasket Inside/Outside Diameter | Not reliably verified |
| Operating Temperature Rating | Not reliably verified |
| Pressure Rating | Not reliably verified |
| Complete Kit Dimensions | Not reliably verified; configuration-specific |
| Complete Kit Weight | Not reliably verified |
| 47554338001 Individual Weight | Not reliably verified |
| Compatibility | Model-, configuration-, and serial-number dependent |
The application of 47555464001 is supported by the available Ingersoll Rand spare-parts catalog. Exact dimensional, material, pressure, temperature, and weight specifications were not reliably established and are therefore not fabricated.
Recommended Companion Models
| Model | Product Name |
|---|---|
| 47555465001 | Ingersoll Rand 8,000-Hour Water-Cooled Preventive Maintenance Kit, R90–110I |
| 47553890001 | Ingersoll Rand Water-Cooled Hose Maintenance Kit, R90–160I |
| 47553892001 | Ingersoll Rand Water-Cooled Hose Maintenance Kit, R90–160 / IE |
| 47553893001 | Ingersoll Rand Water-Cooled Hose Maintenance Kit, R90–160N/NE |
These references are associated with water-cooled R90–160 maintenance and provide complementary service coverage for preventive maintenance and cooling-system hoses. They are companion products rather than automatic substitutes for 47555464001.
Frequently Selected Alternatives
| Model | Product Name |
|---|---|
| 47553881001 | Ingersoll Rand Intake Valve Service Kit 8K, R90–160 |
| 47552954001 | Ingersoll Rand Temperature Control Valve Maintenance Kit, R90–160 |
| 47553884001 | Ingersoll Rand Gearbox Maintenance Kit, R90–160 / IE |
| 47553888001 | Ingersoll Rand Air-Cooled Hose Maintenance Kit, R90–160 / IE |
