Introduction
The Ingersoll Rand 47555464001 / 47554328001 Water Cooler Seal Maintenance Kit listing combines a dedicated water-cooler seal maintenance reference with a separately cataloged gasket reference.
47555464001 is listed as a Water Cooler Seal Maintenance Kit R90–160, placing it within the R90–160 family of Ingersoll Rand compressor service components. The same parts catalog includes related intake-valve, hose, gearbox, preventive-maintenance, and cooler-service references.
Water-cooled rotary screw compressors rely on efficient heat transfer to maintain appropriate operating temperatures. The cooler therefore operates as an important part of the compressor's thermal-management system. Reliable sealing is necessary to keep the cooling-water circuit properly contained.
Cooler sealing components experience repeated thermal cycling and mechanical compression. Over time, gasket material can harden, deform, lose elasticity, or develop surface damage. These conditions can become more apparent after the cooler has been removed, opened, or serviced.
For this reason, seal renewal is an important part of cooler maintenance. A new gasket or seal should be installed on clean, undamaged mating surfaces using the correct installation procedure for the specific compressor configuration.
The associated reference 47554328001 is independently listed as “Sealing gasket.” The available catalog therefore establishes its general function but does not provide sufficient information to safely assign an exact cooler position, dimensional profile, or material specification.
During cooler service, the technician should inspect the gasket contact surfaces carefully. Corrosion, scale, scratches, dents, or distortion can create leakage paths even when a new gasket is installed.
Fastener condition and tightening sequence are also important. Uneven compression can cause localized leakage, while excessive tightening may deform the sealing interface or damage the gasket.
After reassembly, the cooling-water circuit should be checked for leakage before the compressor is returned to normal service. Where applicable, coolant flow and operating temperatures should also be monitored.
The 47555464001 reference should be distinguished from other R90–160 cooling-system service kits. For example, dedicated water-cooled hose maintenance kits address flexible hose assemblies rather than cooler sealing interfaces.
The available catalog also lists other cooler-related components separately, demonstrating that the water cooler seal kit is a specific maintenance reference rather than a complete cooler assembly.
Exact dimensions, gasket thickness, sealing material, pressure rating, and complete kit contents for 47555464001 / 47554328001 were not reliably verified from the available public technical documentation. These details should therefore be confirmed against the compressor's parts list and serial-number information before ordering.
The supplied pair is treated as one product listing as requested. Public records independently establish 47555464001 as the R90–160 water cooler seal maintenance kit and 47554328001 as a sealing gasket reference.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Ingersoll Rand |
| Primary Part Number | 47555464001 |
| Associated Part Number | 47554328001 |
| Product Type | Water Cooler Seal Maintenance Kit / Sealing Gasket |
| Primary Service Reference | Water Cooler Seal Maintenance Kit |
| Secondary Reference | Sealing Gasket |
| Documented Application for 47555464001 | R90–160 |
| Primary Function | Water-Cooler Sealing Maintenance |
| Cooling Arrangement | Water-cooled compressor configuration |
| Gasket Material | Not reliably verified |
| Seal Material | Not reliably verified |
| Gasket Thickness | Not reliably verified |
| Gasket Diameter/Profile | Not reliably verified |
| Operating Temperature Rating | Not reliably verified |
| Pressure Rating | Not reliably verified |
| Complete Kit Dimensions | Not reliably verified; configuration-specific |
| Complete Kit Weight | Not reliably verified |
| 47554328001 Individual Weight | Not reliably verified |
| Compatibility | Model-, configuration-, and serial-number dependent |
The catalog confirms the water cooler seal maintenance classification of 47555464001 and identifies 47554328001 as a sealing gasket. Exact engineering dimensions, material specifications, pressure ratings, and verified weights were not established from reliable technical documentation.
Recommended Companion Models
| Model | Product Name |
|---|---|
| 47555465001 | Ingersoll Rand 8,000-Hour Water-Cooled Preventive Maintenance Kit, R90–110I |
| 47553890001 | Ingersoll Rand Water-Cooled Hose Maintenance Kit, R90–160I |
| 47553892001 | Ingersoll Rand Water-Cooled Hose Maintenance Kit, R90–160 / IE |
| 47553893001 | Ingersoll Rand Water-Cooled Hose Maintenance Kit, R90–160N/NE |
These references provide complementary maintenance coverage for compatible R90–160 water-cooled compressor configurations. They are companion service products rather than automatic replacements for 47555464001.
Frequently Selected Alternatives
| Model | Product Name |
|---|---|
| 47555480001 | Ingersoll Rand Oil Cooler Seal Package |
| 47555479001 | Ingersoll Rand Rear Cooler Seal Package |
| 47556927001 | Ingersoll Rand Water Cooler Seal Maintenance Kit, M200VSD/M250 |
| 47556926001 | Ingersoll Rand Gearbox Maintenance Kit, M350-2S |
