Ingersoll Rand 47553886001 24265647 Air-Cooled Hose Maintenance Kit and Hydraulic Hose

Where It Excels in Industrial Use

• Air-Cooled Hose Maintenance
  47553886001 supports scheduled hose maintenance for applicable Ingersoll Rand R90–R160 and R90–R160i rotary screw compressor configurations.
• Hydraulic Hose Replacement
  24265647 is a dedicated hydraulic hose assembly with a 1.25-inch hose size and a 26-inch length, configured with ORFS straight and SAE 90° flange connections.
• Flexible Fluid Routing
  The hose assembly provides a flexible connection between system components while accommodating normal vibration and equipment movement.
• Planned Compressor Service
  Well suited to maintenance programs where hoses, fittings, and connection points are inspected or replaced during scheduled compressor servicing.
• Industrial Compressed-Air Applications
  Supports demanding environments such as manufacturing plants, pneumatic production equipment, automated machinery, and process-air installations. 

Key Strengths at a Glance

• Purpose-Built Hose Service
  47553886001 provides targeted air-cooled hose maintenance coverage for applicable Ingersoll Rand compressor platforms.
• Defined Connection Configuration
  24265647 uses an ORFS straight connection at one end and an SAE 90° flange connection at the other, providing a configuration-specific replacement solution.
• Controlled Fluid Transfer
  Correct hose construction and fitting geometry help maintain reliable hydraulic fluid routing within the applicable system.
• Flexible Installation
  The 90° flange arrangement can support routing where a straight fitting would create unnecessary bending or installation stress.
• Maintenance Efficiency
  Replacing a deteriorated hose during scheduled service helps reduce the likelihood of leakage, fitting damage, and unplanned compressor downtime.
• Industrial Service Reliability
  The combination provides maintenance teams with a practical, equipment-focused approach to hose replacement and compressor servicing. 

Technical FAQs

1. What is Ingersoll Rand 47553886001 used for?

47553886001 is an air-cooled hose maintenance kit associated with applicable Ingersoll Rand R90–R160 and R90–R160i compressor configurations.

2. What is Ingersoll Rand 24265647?

24265647 is a hydraulic hose assembly configured with a 1.25-inch hose size, 26-inch length, ORFS straight connection, and SAE 90° flange connection.

3. What does ORFS mean?

ORFS means O-Ring Face Seal. The fitting uses an O-ring at the mating face to provide the primary seal when the connection is correctly assembled.

4. What is the purpose of the SAE 90° flange connection on 24265647?

The 90° flange configuration provides an angled connection that can help accommodate the required hose routing while reducing excessive bending at the connection point.

5. Why is hose routing important in hydraulic applications?

Proper routing prevents excessive bending, twisting, abrasion, tension, and heat exposure, all of which can shorten hose service life or place additional stress on the fittings.

6. Can 24265647 be replaced by a hose with the same diameter but different fittings?

No. The hose diameter alone does not establish compatibility. Length, hose construction, pressure capability, fitting type, connection orientation, and application requirements must also match.

7. What are common signs of hydraulic hose deterioration?

Abrasion, cracking, blistering, leakage, deformation, exposed reinforcement, damaged fittings, and unusual changes in hose flexibility can indicate that the assembly requires inspection or replacement.

8. Why should the fittings be inspected when replacing 24265647?

Damaged sealing surfaces, threads, flange faces, or O-rings can cause leakage even when the replacement hose itself is in good condition.

9. What should be considered when installing a 90° flange hose?

The flange orientation, hose bend radius, bolt alignment, sealing surface condition, and routing clearance should be checked to prevent installation-induced stress.

10. How should compatibility of 24265647 be verified?

Confirm the compressor model, hose position, connection types, hose dimensions, operating pressure and temperature requirements, and applicable parts information before installation.