Ingersoll Rand 47572166001 39218193 8000-Hour Preventive Maintenance Kit and Motor Grease

Where It Excels in Industrial Use

• 8000-Hour Compressor Service
  47572166001 is associated with an 8000-hour preventive maintenance program for applicable Ingersoll Rand R132–R160I air-cooled compressor configurations, making it a practical choice for structured long-interval servicing.
• Motor Bearing Lubrication
  39218193 is Ingersoll Rand high-temperature motor grease intended for applicable motor bearing lubrication. Ingersoll Rand documentation identifies 39218193 as Mobilith SHC 220 for specified 60 Hz motor applications.
• High-Temperature Bearing Service
  The grease is designed for demanding bearing environments where temperature, rotational speed, and continuous operation place additional requirements on lubricant performance.
• Continuous-Duty Compressor Operation
  This combination is particularly suitable for industrial compressor installations where planned maintenance and dependable motor operation are critical to production continuity.
• Preventive Motor Maintenance
  Incorporating the correct motor grease into scheduled service helps maintain bearing lubrication and provides a proactive approach to controlling friction and mechanical wear.

Key Strengths at a Glance

• Extended-Service Maintenance
  47572166001 provides an 8000-hour preventive maintenance framework for applicable air-cooled compressor configurations.
• Genuine Motor Grease
  39218193 is listed by Ingersoll Rand as motor grease and is categorized as a high-temperature grease.
• Bearing Lubrication Support
  Proper grease helps maintain the lubricating film between bearing surfaces, reducing friction and supporting stable motor operation.
• High-Temperature Performance
  39218193 is identified as Mobilith SHC 220 for specified 60 Hz motor applications, making correct application and motor-specific lubricant requirements especially important.
• Reduced Lubrication Risk
  Using the specified grease helps avoid unverified lubricant substitutions that may create compatibility or performance concerns.
• Reliability-Focused Service
  Scheduled motor bearing lubrication complements the wider 8000-hour compressor maintenance program and supports long-term equipment availability.

Technical FAQs

1. What is Ingersoll Rand 47572166001 used for?

47572166001 is an 8000-hour preventive maintenance kit associated with applicable Ingersoll Rand R132–R160I air-cooled compressor configurations.

2. What is Ingersoll Rand 39218193?

39218193 is Ingersoll Rand motor grease, identified in parts listings as high-temperature grease.

3. What is the primary purpose of motor bearing grease?

Motor grease forms a lubricating film between bearing surfaces, helping reduce friction, wear, and heat generated during rotation.

4. Why is high-temperature grease important for compressor motors?

Compressor motors can operate continuously under substantial mechanical and thermal loads. The lubricant therefore needs to retain suitable performance as bearing temperature increases.

5. Is 39218193 suitable for every Ingersoll Rand motor?

No. Lubricant selection should follow the motor's lubrication specification and grease information plate. Ingersoll Rand documentation specifically identifies 39218193 for certain 60 Hz motor applications.

6. Can 39218193 be mixed with another grease?

Mixing should not be assumed to be safe. Different base oils, thickeners, and additive systems may be incompatible and can alter grease performance.

7. What can happen when a motor bearing is under-lubricated?

Insufficient grease can increase friction, operating temperature, vibration, and bearing wear, potentially shortening bearing service life.

8. Can excessive grease affect bearing operation?

Yes. Over-greasing can increase churning and friction, producing additional heat. The specified grease quantity and lubrication interval should therefore be followed.

9. What should be checked before lubricating the motor bearings?

Confirm the motor's grease specification, bearing arrangement, lubrication interval, existing grease condition, and applicable service procedure before applying lubricant.

10. Does motor bearing lubrication replace condition monitoring?

No. Bearing temperature, vibration, noise, and general motor condition should still be monitored as part of a comprehensive compressor maintenance program.