Ingersoll Rand 47579629001 23113459 Air-Cooled Hose Maintenance Configuration

Where It Excels in Industrial Use

• The Ingersoll Rand 47579629001 23113459 configuration is intended for compressor maintenance applications where a specified hose component is required as part of an air-cooled service arrangement.

• Part 23113459 is identified as a hydraulic hose measuring 0.75 × 30.00, with straight JIC connections at both ends, providing a clearly defined replacement configuration.

• The combination supports planned maintenance by pairing the applicable Ingersoll Rand maintenance reference with the specified hose rather than relying on a generic hose substitution.

• Its defined hose size and straight-end connection arrangement help service personnel verify physical fit, connection geometry, and installation routing before returning the compressor to service.

• Exact application should be confirmed against the compressor model, serial number, existing hose arrangement, and applicable service documentation before installation.

Key Strengths at a Glance

• Defined Maintenance Configuration: 47579629001 and 23113459 are treated as one complete requested service configuration for equipment maintenance.

• Hydraulic Hose Construction: 23113459 is identified as a hydraulic hose with a 0.75-inch nominal size and 30.00-inch length.

• Straight JIC Connections: The hose uses straight JIC connection ends, supporting a defined interface with the applicable compressor installation.

• Maintenance Reliability: Correct hose replacement can help address deterioration caused by vibration, heat, abrasion, aging, or connection stress.

• Application Verification: The exact compressor model and serial number should be checked before installation to confirm that this configuration matches the original system arrangement.

Technical FAQs

1. What is the Ingersoll Rand 47579629001 23113459 configuration?
It is a combined maintenance configuration consisting of the 47579629001 reference and the specified 23113459 hydraulic hose.

2. What type of hose is 23113459?
23113459 is identified as a hydraulic hose measuring 0.75 × 30.00.

3. What connections are used on 23113459?
The 23113459 hose is identified with straight JIC connections at both ends.

4. Can another 0.75-inch hose with a 30-inch length be substituted?
Not automatically, because the replacement must also match the required fittings, hose construction, pressure capability, temperature requirements, and compressor application.

5. How should compatibility be verified?
Compatibility should be confirmed using the compressor model and serial number, the applicable parts documentation, and the original hose installation.

6. What should be checked before installing the hose?
Technicians should verify hose size, length, fitting type, connection orientation, routing, bend radius, clearance, and the condition of the mating fittings.

7. Why are straight JIC connections important?
The straight connection geometry determines how the hose interfaces with the equipment and must correspond with the original installation to avoid misalignment and excessive mechanical stress.

8. What conditions can indicate that the existing hose needs replacement?
Leakage, cracking, abrasion, blistering, deformation, damaged fittings, or abnormal vibration can indicate hose deterioration requiring replacement or further inspection.

9. Is this configuration suitable for every compressor using 47579629001?
No, the complete configuration remains application-specific and should be verified against the exact compressor model and serial number.

10. What should be done after installing 23113459?
The hose should be checked for correct routing, secure JIC connections, adequate clearance, and leakage before the compressor is returned to normal operation.