Product Introduction

The Foxboro P0928AW Terminal Cable is a component for industrial automation installations where a specified cable assembly is needed to connect compatible control hardware. Its stated 1-meter cable length makes it a candidate for compact equipment layouts and local interconnections, provided that the installed system documentation identifies this model as suitable.

In process automation, individual connection components play an important role in the overall reliability and maintainability of a control installation. Choosing the correct cable helps preserve the intended connection arrangement and makes replacement work more straightforward. Proper routing, connector inspection, and adherence to equipment-specific requirements are also essential for dependable operation.

For maintenance engineers, system integrators, and industrial spare-parts buyers, accurate model identification is particularly important when supporting existing equipment. Before purchasing the P0928AW, compare the part number with the installed cable or equipment documentation and confirm that the connector and electrical specifications meet the application requirements.

Whether required for scheduled maintenance, spare-parts inventory, or a control cabinet service project, the P0928AW should be selected on the basis of verified compatibility rather than cable length or appearance alone.

Technical Specifications

Parameter	Specification
Brand	Foxboro
Model	P0928AW
Product Type	Terminal Cable
Cable Length	1 meter
Shipping Weight	3 kg
Shipping Weight (lb)	6.61 lb
Application	Industrial automation and control system connections
Installation	According to the connected equipment's requirements
Connector Configuration	Verify with the supplier
System Compatibility	Requires confirmation against the installed hardware
Physical Dimensions	Not provided

Weight conversion: 3 kg = 6.61 lb, rounded to two decimal places.

Shipping note: The supplied 3 kg value is identified as shipping weight. It should not be interpreted as the cable's net weight.

Recommended Related Models

The following Foxboro product references may be useful when reviewing spare-parts requirements for a control system. They are related equipment references only; direct compatibility with the P0928AW has not been established.

Model	Product Type	Selection Consideration
Foxboro FBM01	Fieldbus Module	Check system generation and interface requirements
Foxboro FBM02	Fieldbus Module	Verify compatibility with the installed control platform
Foxboro FBM03	Fieldbus Module	Review the required field interface configuration
Foxboro FBM04	Fieldbus Module	Confirm module and connection specifications
Foxboro FBM05	Fieldbus Module	Check the system bill of materials before procurement

When choosing associated components, verify the complete model number and the intended connection arrangement in the equipment documentation.

Popular Related Models

For buyers maintaining Foxboro automation systems, the following model references may also be worth reviewing when identifying related control hardware and planning maintenance inventory.

Model	Product Category	Typical Use
Foxboro FBM201	Fieldbus Module	Field I/O maintenance
Foxboro FBM202	Fieldbus Module	Control system replacement planning
Foxboro FBM203	Fieldbus Module	Industrial automation spare-parts sourcing
Foxboro FBM204	Fieldbus Module	Field interface maintenance
Foxboro FBM205	Fieldbus Module	Control system lifecycle support

Model verification is essential: These related models are not confirmed direct replacements or compatible accessories for the P0928AW. Verify each part number against the actual system configuration before ordering.

Applications

The Foxboro P0928AW Terminal Cable is an industrial automation connection component intended for use in compatible control system installations. In process control environments, terminal cables provide the physical interconnections required to integrate system hardware and maintain an organized wiring structure.

With a specified cable length of 1 meter, the P0928AW is suitable for connection layouts where associated equipment is installed relatively close together. A properly matched cable helps simplify cabinet wiring, supports maintenance activities, and contributes to a well-organized control system installation.

Typical application areas include:

Distributed Control Systems (DCS): Used where the installed Foxboro hardware specifies this cable for system interconnection.
Industrial control cabinets: Supports short-distance connections between compatible control components.
Process automation facilities: Can be considered for appropriate control system installations in industries such as chemical processing, power generation, and manufacturing.
Equipment maintenance: Suitable for replacement planning when the P0928AW is identified in the existing system documentation.
Spare-parts management: Helps maintenance teams source the specified cable for planned servicing and equipment restoration.

Before installation, verify the cable's connector configuration, electrical requirements, and compatibility with the intended Foxboro hardware. The model designation alone should not be used to assume compatibility with every Foxboro control system.

Advantages and Key Features

1. Compact Cable Length for Local Interconnections

The specified 1-meter length is practical for equipment arrangements requiring a short connection. Appropriate cable selection helps reduce unnecessary slack and supports a tidy installation.

2. Supports Established Foxboro Installations

For facilities maintaining existing Foxboro automation equipment, identifying the correct cable model is an important step in preserving the intended hardware configuration.

3. Simplifies Maintenance Planning

A clearly identified replacement cable helps maintenance personnel match spare parts to equipment records, reducing uncertainty during scheduled servicing or troubleshooting.

4. Promotes Organized Cabinet Wiring

Using an appropriately sized cable can make routing and cable management easier, particularly in installations with closely positioned modules or interface equipment.

5. Suitable for Compatibility-Based Procurement

The P0928AW can be specified for purchasing and inventory purposes when the model is confirmed against the original installation requirements.

6. Supports Reliable Equipment Connections

Correct connector engagement, proper routing, and compliance with equipment-specific installation instructions help maintain dependable electrical interconnections.

Technical FAQs

Q1. What is the primary purpose of the Foxboro P0928AW Terminal Cable?

It is a terminal cable intended to provide an interconnection between compatible industrial automation components. Its exact function depends on the hardware and connection arrangement specified for the P0928AW.

Q2. Which Foxboro control systems support this cable?

Compatibility must be confirmed using the documentation for the target system. Do not assume that the P0928AW is suitable for all Foxboro DCS platforms or module generations.

Q3. Can the P0928AW be used as a direct replacement for another Foxboro cable?

Only when the replacement cable's electrical characteristics, connectors, pin assignments, and intended function match the original specification. Similar appearance does not guarantee compatibility.

Q4. Does the P0928AW require software configuration?

A cable itself generally does not require software configuration. However, the connected control equipment may require specific hardware settings or wiring arrangements.

Q5. What should be checked before connecting the cable?

Confirm the model number, mating connector type, connection points, and relevant installation instructions. Inspect the cable and connectors for visible damage before use.

Q6. Can the cable be installed in a high-electromagnetic-interference environment?

Suitability depends on its construction, shielding, and the requirements of the connected equipment. Follow the system manufacturer's guidance for cable separation, grounding, and routing in electrically noisy environments.

Q7. How should the P0928AW be routed inside a control cabinet?

Route it to avoid sharp bends, pinching, excessive tension, and interference with moving or serviceable components. Maintain the separation from power conductors required by the applicable installation instructions.

Q8. What symptoms may indicate a faulty terminal cable?

Possible symptoms include intermittent connections, communication errors, signal interruptions, or failure of the connected equipment to recognize an interface. These symptoms can also result from other system faults, so diagnosis should include connector and hardware checks.

Q9. Can the P0928AW be extended to reach equipment farther away?

Do not extend or splice the cable unless the equipment documentation explicitly permits it. An extension can affect electrical performance, shielding, signal integrity, or connector reliability.

Q10. What information should buyers provide when ordering a replacement?

Provide the full P0928AW model number, the connected equipment model, the required connector arrangement, and the original cable specifications. Confirming these details helps reduce the risk of ordering an unsuitable component.