Introduction

The Schneider MT20N2 Circuit Breaker is a model-specific component for consideration in industrial electrical distribution and maintenance procurement. Selecting the correct circuit breaker is essential for ensuring that the device matches the system's operating conditions and required protection characteristics.

For maintenance engineers, panel builders, and industrial equipment buyers, accurate identification is an important first step. Before ordering the MT20N2, confirm the complete product designation and compare its electrical and mechanical specifications with those required by the existing installation. This verification helps reduce replacement errors and supports more reliable equipment maintenance.

Technical Specifications

Parameter	Specification
Brand	Schneider Electric
Model	MT20N2
Product Type	Circuit Breaker
Dimensions (L × W × H)	301 × 196 × 276 mm
Weight	14 kg
Weight in Pounds	30.86 lb
Rated Current	Verify against the product nameplate
Rated Voltage	Verify against the exact model documentation
Breaking Capacity	Confirm from technical documentation
Pole Configuration	Verify for the supplied version
Mounting Arrangement	Confirm before installation
Connection Type	Confirm before installation

Technical note: The dimensions and weight above are based on the supplied product information. Confirm all electrical ratings and configuration details against the exact device documentation before purchasing or commissioning.

Recommended Related Models

The following model designations can be used as starting points for researching related Schneider MT-series circuit breakers. Similar model numbers do not establish electrical or mechanical interchangeability.

Model	Product Type
Schneider MT06N2	Circuit Breaker — verify exact specifications
Schneider MT08N2	Circuit Breaker — verify exact specifications
Schneider MT10N2	Circuit Breaker — verify exact specifications
Schneider MT12N2	Circuit Breaker — verify exact specifications
Schneider MT16N2	Circuit Breaker — verify exact specifications

Popular Related Models

For replacement projects and spare-parts planning, the following model designations may also be worth checking against the required equipment specification.

Model	Verification Required
Schneider MT06N1	Confirm product family and ratings
Schneider MT08N1	Confirm product family and ratings
Schneider MT10N1	Confirm product family and ratings
Schneider MT12N1	Confirm product family and ratings
Schneider MT16N1	Confirm product family and ratings

Procurement recommendation: Before placing an order, confirm that the supplied unit matches the required model and electrical specifications. Verify the product's rated current, voltage, breaking capacity, connection arrangement, and mounting requirements rather than relying on model-number similarity alone.

Applications

The Schneider MT20N2 Circuit Breaker is identified for industrial electrical distribution applications where dependable circuit switching and appropriate electrical protection are essential. In manufacturing facilities, commercial buildings, and industrial control systems, circuit breakers help protect electrical circuits from fault conditions when correctly selected for the system.

Typical application areas include:

Industrial power distribution: Used in suitable distribution assemblies to support circuit protection.
Manufacturing plants: Applied in electrical panels serving production machinery and supporting equipment.
Switchboards and control panels: Integrated into compatible electrical assemblies according to system requirements.
Commercial facilities: Supports organized power distribution and circuit management.
Maintenance and equipment replacement: Helps maintenance teams identify and source the specified circuit-breaker model.

The MT20N2 should be selected only after verifying its rated current, operating voltage, breaking capacity, pole configuration, and mounting requirements against the original equipment and installation design.

Advantages

1. Supports Reliable Circuit Protection

A properly specified circuit breaker helps protect electrical circuits by interrupting current under applicable fault conditions.

2. Facilitates Electrical System Maintenance

A clearly identified breaker model helps technicians manage spare parts, plan maintenance, and reduce errors during replacement.

3. Integrates into Compatible Electrical Assemblies

When its physical dimensions and electrical characteristics match the installation, the breaker can be incorporated into an appropriate distribution panel.

4. Helps Protect Connected Equipment

Correct circuit-breaker selection and coordination can help limit the impact of overloads and short circuits on cables and connected equipment.

5. Supports Industrial Power Distribution

Circuit breakers are fundamental components in electrical systems that require organized distribution and dependable protection.

6. Simplifies Model Identification

Using the full MT20N2 designation when requesting quotations or arranging replacements helps distinguish the required device from similar-looking products.

Technical FAQs

Q1: What is the purpose of the Schneider MT20N2 Circuit Breaker?

Its intended product category is a circuit breaker used for electrical switching and protection. Confirm the specific protection functions and operating characteristics from the product label and technical documentation.

Q2: Is the MT20N2 suitable for industrial electrical panels?

Suitability depends on the panel design and the breaker's electrical ratings, installation method, and connection requirements. These details must be verified before installation.

Q3: How can I confirm the rated current?

Read the device nameplate and consult the applicable technical documentation. Do not assume the rated current based solely on the model designation.

Q4: What is the importance of breaking capacity?

Breaking capacity indicates the fault current a breaker can interrupt under specified conditions. The selected device must meet or exceed the applicable installation requirements.

Q5: Does the MT20N2 support overload protection?

The exact protection functions depend on the device's design and trip configuration. Verify the specific model's characteristics before incorporating it into a protection scheme.

Q6: Can it replace another Schneider circuit breaker?

Not automatically. Compare the complete model number, rated voltage and current, breaking capacity, pole arrangement, connection method, mounting requirements, and applicable standards.

Q7: What should be checked before energizing the circuit?

Verify installation security, electrical connections, ratings, protection coordination, and compliance with the manufacturer's instructions. Commissioning should be performed by qualified personnel.

Q8: Why might a circuit breaker trip immediately after being reset?

Potential causes include a short circuit, ground fault where applicable, incorrect wiring, or a faulty connected load. Investigate the cause before attempting to re-energize the circuit.

Q9: Can the MT20N2 be used in a system with high fault current?

Only if its verified breaking capacity and other ratings are suitable for the calculated fault level at the installation point. The required values must be established through electrical system assessment.

Q10: What details are needed to source the correct replacement?

Provide the full model designation, clear nameplate photographs, quantity, application details, and available information about the existing electrical installation. These details help confirm product compatibility.

Look forward to your comments!Comment