Introduction
The Ingersoll Rand 47548443001 85562536 Water-Cooled Hose Maintenance Kit provides a defined service reference for hose maintenance on compatible New Cobra 90–160 and M90–160 compressor platforms. 47548443001 is identified as a water-cooled hose maintenance kit, while 85562536 is listed as a 1.50 × 42.00 hydraulic hose associated with the M90–160 VSD service configuration.
Hose assemblies are essential to the reliability of industrial compressors because they provide flexible connections between components that can experience vibration, thermal changes, and continuous operating cycles. Correct hose specification is therefore important not only for preventing leakage but also for preserving the intended routing and mechanical freedom of connected assemblies.
The 85562536 reference is clearly defined in Ingersoll Rand parts data as Hose D 1.50 × 42.0. It is also listed in other parts catalogs as HOSE HYD 1.50 X 42.00, providing consistent identification across multiple sources.
The published hose family uses drawing reference 36889913 for a series of 1.50-inch hose assemblies. Nearby references include 85562510 at 38 inches, 85562544 at 44 inches, 85562569 at 46 inches, 85562593 at 50 inches, and 85562601 at 52 inches. This close numbering and dimensional similarity make exact part-number verification essential during procurement.
The service relationship between the requested references is also particularly clear. The M90–160 VSD listing identifies 47548443001 as the water-cooled hose maintenance kit and places 85562536 within the same maintenance configuration, together with other hoses and sealant. This provides a stronger application link than simply finding the two part numbers in separate catalogs.
A hose should be evaluated as a complete assembly rather than by nominal size alone. End fittings, connection geometry, hose routing, length, operating pressure, temperature, and fluid compatibility all influence whether a replacement will perform correctly.
During replacement, technicians should inspect the entire hose path. Abrasion against brackets, hot surfaces, sharp edges, or moving components can accelerate deterioration and may indicate a routing or support problem that should be corrected at the same time.
Connection points deserve equal attention. Leakage may occur because of damaged fittings, worn sealing surfaces, incorrect tightening, contamination, or alignment problems rather than because the hose itself has failed. Installing a new hose without resolving an underlying connection issue can lead to repeated maintenance.
The 47548443001 service reference is particularly useful for water-cooled compressor maintenance because hose condition can affect the reliability of the associated fluid circuits. Preventive inspection allows maintenance teams to identify cracking, hardening, swelling, abrasion, or other deterioration before a hose failure interrupts production.
Because 85562536 is cataloged as a hydraulic hose, the actual equipment drawing should be used to confirm its service circuit and fluid compatibility. The hose should not be assumed suitable for another circuit simply because the nominal diameter and length appear appropriate.
Correct routing is also important after installation. The replacement should follow the intended path without excessive twisting or bending and should maintain adequate clearance from heat sources, rotating components, and sharp edges. These practices help reduce unnecessary mechanical stress on both the hose and fittings.
For maintenance planners, retaining 47548443001 together with the individual 85562536 part number improves service traceability. This is especially helpful where the same compressor family uses multiple hose lengths that appear nearly identical in catalogs.
The broader water-cooled hose service configuration also includes references such as 85560431, 85561850, 85562460, and 85562544. Their inclusion in the same service environment does not make them interchangeable with 85562536; each has its own dimensional and application requirements.
Exact hose construction, internal reinforcement, pressure rating, temperature rating, detailed fitting specification, kit contents, package dimensions, and weight were not sufficiently verified from authoritative documentation. These specifications are therefore intentionally not estimated.
For industrial compressor operators and maintenance professionals, 47548443001 and 85562536 provide a useful combination for planned water-cooled hose service. Accurate part-number matching, careful routing, and inspection of the complete connection assembly can help reduce leakage risk, improve maintenance efficiency, and support dependable compressor operation.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Ingersoll Rand |
| Maintenance Kit Reference | 47548443001 |
| Component Reference | 85562536 |
| 47548443001 Product Type | Water-Cooled Hose Maintenance Kit |
| 85562536 Product Type | Hydraulic Hose |
| Hose Diameter | Approx. 1.50 in |
| Hose Length | Approx. 42.00 in |
| Drawing Reference | 36889913 |
| Primary Function | Flexible fluid routing |
| Documented Equipment Application | M90–160 VSD / New Cobra 90–160 service configuration |
| Hose Construction | Verify current manufacturer specification |
| End-Fitting Configuration | Application-specific; verify current parts documentation |
| Working Pressure | Application-specific; verify applicable specification |
| Temperature Rating | Application-specific; verify applicable specification |
| Fluid Compatibility | Verify against the equipment-specific circuit |
| Bend Radius | Verify current manufacturer specification |
| Kit Contents | Verify current configuration-specific bill of materials |
| Kit Dimensions | Application-specific; verify applicable documentation |
| Weight | Packaging-specific; verify supplied product |
| Installation | Follow applicable Ingersoll Rand service documentation |
| Compatibility | Confirm compressor model, serial number, assembly drawing, and hose configuration before ordering |
The 1.50 × 42.0 hose specification and drawing reference 36889913 are documented in Ingersoll Rand parts catalog data, while the M90–160 VSD service listing connects 85562536 with 47548443001.
Recommended Companion Models
| Model | Product Name |
| 85560431 | Hose D 0.75 × 42.00 |
| 85561850 | Hose D 1.25 × 46.00 |
| 85562460 | Hydraulic Hose D 1.50 × 30.00 |
| 85562544 | Hydraulic Hose D 1.50 × 44.00 |
These references are listed within the same or closely related M90–160 water-cooled hose service environment. Their different diameters or lengths mean they are complementary components rather than automatic substitutes for 85562536.
Frequently Selected Alternatives
| Model | Product Name |
| 47545140001 | Air-Cooled Hose Maintenance Kit – New Cobra 90–160 / M90–160 |
| 47550996001 | 8,000-Hour Water-Cooled Preventive Maintenance Kit – New Cobra 90–160 / M90–160 |
| 47550997001 | 8,000-Hour Air-Cooled Preventive Maintenance Kit – New Cobra 90–160 / M90–160 |
| 47545145001 | 8,000-Hour Preventive Maintenance Kit – New Cobra 90–160 |
