Ingersoll Rand 47625673001 40068389 8,000-Hour Maintenance and Breather Element Configuration

Where It Excels in Industrial Use

• Designed for the 8,000-hour water-cooled maintenance program associated with applicable Ingersoll Rand Sierra compressor configurations.

• Combines maintenance reference 47625674001 with the specified 15472392 gasket as one complete requested service configuration.

• Well suited to industrial compressed-air installations where water-cooled compressor maintenance requires attention to cooler assemblies and associated sealing interfaces.

• Supports planned maintenance by bringing the scheduled service reference and specified cooler gasket into one identifiable configuration.

• Particularly useful for maintenance teams managing extended service intervals on continuously operating compressor systems.

Key Strengths at a Glance

• Water-cooled service focus: 47625674001 is identified as an 8,000-hour water-cooled maintenance kit.

• Cooler sealing support: 15472392 is a gasket specified for cooler assembly 39796677.

• Integrated service reference: The two part numbers can be handled as one complete maintenance configuration while retaining individual component identification.

• Leak-prevention function: A correctly fitted gasket helps maintain sealing integrity at the applicable cooler interface.

• Maintenance planning: The configuration supports organized replacement of scheduled service components and cooler sealing hardware.

Technical FAQs

1. What is the 47625674001 15472392 configuration used for?

It combines the 47625674001 8,000-hour water-cooled maintenance kit reference with the specified 15472392 gasket for the applicable compressor service configuration.

2. What maintenance interval is associated with 47625674001?

47625674001 is identified as an 8,000-hour water-cooled maintenance kit for the applicable Ingersoll Rand compressor platform.

3. What is the function of 15472392?

15472392 is a gasket used with cooler assembly 39796677 to provide sealing at the applicable cooler interface.

4. Which compressor platform is associated with 47625674001?

The 47625674001 reference is associated with the Sierra compressor service range, with exact model and configuration applicability requiring verification before installation.

5. Why is the 15472392 gasket important during cooler maintenance?

The gasket helps maintain a sealed interface between the applicable cooler assembly and its mating components, reducing the risk of leakage when correctly installed.

6. What should be checked before replacing 15472392?

The technician should confirm cooler assembly identification, gasket seating surfaces, mating-component condition, fastener condition, and the current applicable parts documentation.

7. Can an old 15472392 gasket be reused after cooler removal?

A removed gasket should not be reused unless the applicable Ingersoll Rand maintenance procedure specifically permits reuse. Replacement is normally appropriate when the sealed joint has been opened.

8. What installation conditions are important for 15472392?

The mating surfaces should be clean and undamaged, the gasket should be correctly positioned, and the cooler assembly should be tightened according to the applicable service procedure.

9. What symptoms can indicate a cooler sealing problem?

Visible coolant or fluid leakage, residue around the cooler interface, loss of system pressure, or abnormal operating conditions can indicate that the cooler sealing arrangement requires inspection.

10. Does 15472392 apply to every Ingersoll Rand water-cooled compressor?

No. 15472392 is associated with the specified cooler assembly and should be installed only when the compressor configuration and cooler identification confirm its applicability.