Ingersoll Rand 47578999001 23712608 Air-Cooled Hose Service Configuration

Where It Excels in Industrial Use

• Designed as a consolidated service configuration combining the Ingersoll Rand 47578999001 air-cooled hose package for Sierra 90–150 applications with the specified 23712608 Teflon hose assembly.

• Supports planned maintenance where a dedicated flexible hose must be replaced within the applicable compressor service circuit.

• Suitable for industrial compressed-air installations where dependable hose routing, connection integrity, and resistance to operating temperature are important.

• The 23712608 assembly is identified as a 0.38 × 26.50-inch Teflon hose with a straight ORFS connection and a 90-degree ORFS elbow connection.

• Provides maintenance teams with a defined procurement reference for the requested hose package and individual replacement hose while retaining the specified connection geometry.

Key Strengths at a Glance

• Sierra service application: 47578999001 is identified as an air-cooled hose package for Ingersoll Rand Sierra 90–150 applications.

• Teflon hose construction: 23712608 uses a Teflon hose assembly suited to applicable compressor service conditions.

• Angled connection geometry: The straight-to-90-degree ORFS configuration provides a defined connection orientation for the applicable installation.

• Extended hose reach: The 26.50-inch hose length provides a longer flexible connection for installations requiring additional routing distance.

• Application-specific replacement: Correct selection depends on the compressor model, hose location, connection arrangement, operating conditions, and current parts documentation.

Technical FAQs

1. What does the 47578999001 23712608 configuration represent?

It represents a complete requested service configuration combining the 47578999001 air-cooled hose package reference with the specified 23712608 Teflon hose assembly.

2. What is 47578999001?

47578999001 is identified as an air-cooled hose package for Ingersoll Rand Sierra 90–150 applications.

3. What is 23712608?

23712608 is an Ingersoll Rand Teflon hose assembly specified as 0.38 × 26.50 inches with ORFS straight and 90-degree elbow connections.

4. What type of connections does 23712608 use?

The documented assembly uses a straight ORFS connection at one end and a 90-degree ORFS elbow connection at the other end.

5. Why is the 90-degree connection important?

The angled connection establishes a defined change in direction at the fitting, helping achieve the required installation geometry without imposing an unsuitable bend on the flexible hose.

6. Can 23712608 be replaced with another 0.38-inch hose of similar length?

Not automatically. The replacement must also match the hose construction, connection type and orientation, pressure and temperature requirements, routing geometry, and compressor-specific application.

7. What should be checked before installing 23712608?

The technician should verify the 0.38-inch nominal size, approximately 26.50-inch length, straight-to-90-degree ORFS configuration, routing, bend requirements, pressure rating, temperature conditions, and equipment documentation.

8. What conditions can shorten the service life of the hose?

Excessive vibration, repeated flexing, abrasion, elevated temperature, pressure cycling, improper routing, and mechanical stress at the fittings can contribute to premature hose deterioration.

9. What signs indicate that the hose assembly requires inspection?

Visible abrasion, cracking, deformation, leakage, damaged fittings, surface deterioration, or abnormal movement during operation should prompt inspection of the hose and its connections.

10. What should be checked after installing 23712608?

The technician should confirm correct fitting orientation and connection, ensure the hose is not twisted or excessively bent, maintain clearance from surrounding components, and check the circuit for leakage during the applicable operational test.